![]() |
Originally Posted by B00t13g
(Post 10588329)
Also this was the first time I've ever used your tires. I glued some rebar fronts at the same time with no issues. Idk :(
|
I picked up a set of hexes for my worlds b4,the fronts are nice and blue like the rear hubs,the rear vexes almost look purple,bad batch of anodizing?
|
Originally Posted by mxracer458
(Post 10588756)
I picked up a set of hexes for my worlds b4,the fronts are nice and blue like the rear hubs,the rear vexes almost look purple,bad batch of anodizing?
|
Originally Posted by CraigMBA
(Post 10587962)
Thanks for the quick answer. I do most of my business with Tower and Stormer, and both of them had "on order" or "temporarily unavailable" on a ton of stuff, but in particular, bar codes in blue or gold. We have a brand new indoor track (the only one between Orange County and Sacramento) and I have no idea what to run for compounds.
|
Originally Posted by PW
(Post 10588882)
Well I just confirmed with the warehouse that we have both "blue" and "gold" Bar Codes in stock. Both of those are very popular indoor compounds for indoor tracks. Gold seems to be the best on wet/damp conditions and Blue on the drier/grooved conditions.
|
Originally Posted by Jake S
(Post 10588746)
that "blue lable" glue isnt very good, if your looking for a cheap alternative to expensive "rc grade" glue check out Loctite "professional liquid" it comes in a blue bottle with a cap that snaps and even has a cap that plugs the hole so you get zero leakage, and its under $5 for .71oz.
|
Originally Posted by Jmuck69
(Post 10588892)
Are greens not ideal for indoor drier conditions?
|
Just checked on the wheels after sitting over night. The tires are glued solid they just took a tad longer to dry. It seems like the hybrids will be killer at the j concepts race this weekend.
|
Originally Posted by B00t13g
(Post 10589032)
Just checked on the wheels after sitting over night. The tires are glued solid they just took a tad longer to dry. It seems like the hybrids will be killer at the j concepts race this weekend.
|
Originally Posted by PW
(Post 10589101)
Cool...Jason will be there this weekend along with several of our team drivers. Feel free to go say hi and check out the JConcepts pits for all the new products :sneaky:.
|
Originally Posted by PW
(Post 10589018)
Greens work great indoor for certain conditions (mostly east coast), but 90% of the indoor "west coast" tracks use Gold and some blue.
|
How soon til premounted Barcodes are back in stock? In particular Slash 4x4/Blitz 12mm hex?
|
Originally Posted by PW
(Post 10588882)
Well I just confirmed with the warehouse that we have both "blue" and "gold" Bar Codes in stock. Both of those are very popular indoor compounds for indoor tracks. Gold seems to be the best on wet/damp conditions and Blue on the drier/grooved conditions.
Hopefully you guys make it to the Peachstate Classin in Georgia in May! this track is DD's/Hybrids in back and Groovys/Rips in the front. How soon til premounted Barcodes are back in stock? In particular Slash 4x4/Blitz 12mm hex? |
Thanks!
|
PW-Which barcodes have better side bite....V1 or V2?
|
| All times are GMT -7. It is currently 03:30 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.