Hb Racing E819 Ebuggy
#61
Start off with 3x1.35 + 3x1.3 pistons and medium shock oil.
Then try 4x1.3 + 4x1.2 pistons and heavy oil.
If there's harsh flat landings, I always run 6x1.3 pistons.
Then try 4x1.3 + 4x1.2 pistons and heavy oil.
If there's harsh flat landings, I always run 6x1.3 pistons.
#62
Tech Rookie
#63
Any suggestions on running a Tekin Indoor T8i 1950kv in the HB e819 motor mount? There made for the std 42mm dia motors, but the indoor Tekin is 38mm dia? Thanks
#64
#66
Tech Apprentice
Anyone happen to know if a Mugen mbx8 eco body fits the E819RS?
#67
Tech Elite
iTrader: (12)
It "fits" but the HB side pods are a little wider than the Mugen so it pushes the body out a small amount. The HB side pods also extend rearward a bit more than the Mugen but that doesn't look too bad fit wise. The front hole needs to be moved forward about the width of the hole on the Mugen (I just punched one real quick for the pictures). There is plenty of clearance for the electronics and battery.
#68
Tech Apprentice
It "fits" but the HB side pods are a little wider than the Mugen so it pushes the body out a small amount. The HB side pods also extend rearward a bit more than the Mugen but that doesn't look too bad fit wise. The front hole needs to be moved forward about the width of the hole on the Mugen (I just punched one real quick for the pictures). There is plenty of clearance for the electronics and battery.
#69
hi all. how abput optima accessories? i use radio box its very cool and i can move rear the engine a bit.
the diff cell with better acces to the diff i dunno but i m not sure it work fine...
the diff cell with better acces to the diff i dunno but i m not sure it work fine...
#70
Hey guys my son drives a tekno eb48 2.0 and we been looking at the new e819rs has anyone driven both to Compare them as we looking for s buggy is lot more easy to setup and tune stable
#71
Is this also the thread to discuss the RS version? I’m about to start building mine and was wondering if anyone had advice/things to look out for/helpful hints?
#73
Currently building mine and had an issue with one of the shock collars not being able to thread properly. HB Racing is aware of the issue and are sending Absolute Hobbyz replacements. I mention Absolute Hobbyz because that is where I buy all my stuff, but I’m sure it’s the same for any dealer. Great build so far, so impressed with the quality. I used to think Kyosho was the best, and although they make a killer product, I prefer HB Racing now. I have it’s twin (D819 non RS) and have had great luck/experience with that one as well.
#75
Tech Elite
iTrader: (43)
I race the EB48 2.0 for 1.5 years now and just ordered the HB kit. A bunch of guys at my track are turning to HB..... most of them are TLR guys. I think Im the only one who is from Tekno.... but I am still keeping it .... hopefully the HB will be better than my Tekno.... we will see.