SORMCC onroad racing
#1
Tech Champion
Thread Starter
SORMCC onroad racing
I have created this thread for discussion relating to meetings operated by SORMCC.
Address: www.sydneyonroadmodelcarclub.com.au
Address: www.sydneyonroadmodelcarclub.com.au
Last edited by contact; 07-20-2011 at 04:20 AM. Reason: incorrect address
#2
Tech Champion
Thread Starter
Notice: Details for the next SORMCC meeting at Morreau Res, Eastern Creek
Date: Saturday the 23rd
Practice from 2.00pm and racing to start at 3.00pm.(Finishing under lights if needed)
Classes will be:
1/10th Electric touring car - Stock
1/10th Electric touring car - Modified
1/10th Nitro touring car - pull start and non pull start
Entry per class $10.00
240v power, canteen and toilets on site.
Date: Saturday the 23rd
Practice from 2.00pm and racing to start at 3.00pm.(Finishing under lights if needed)
Classes will be:
1/10th Electric touring car - Stock
1/10th Electric touring car - Modified
1/10th Nitro touring car - pull start and non pull start
Entry per class $10.00
240v power, canteen and toilets on site.
#4
Tech Champion
Thread Starter
3 heats and 1 final
#5
hi BK... Mr Dei Rossi told me about this weekend so my bro and I will come down if dats okay...
i will post race meet on the OzRyderz site... also, if you need any help on a site, i would be more than happy to provide one for SORMCC... let me know... cheers!
i will post race meet on the OzRyderz site... also, if you need any help on a site, i would be more than happy to provide one for SORMCC... let me know... cheers!
#7
Tech Addict
Originally posted by Besercoe
Darkman, why dont you make your site a little less complicated and full, there are sooooo many things trying to grab your attention, that it makes it too hard for the reward
Darkman, why dont you make your site a little less complicated and full, there are sooooo many things trying to grab your attention, that it makes it too hard for the reward
#8
bwahahahah its a portal... so its suppose to hypnotise you so that you start twitching and wont be able to control your mouse...
hehehehehe its spose to be like that unfortunately...
hehehehehe its spose to be like that unfortunately...
#10
So what type of surface butumen, concrete, rough or smooth?
#11
what type of tyres work?
#12
Tech Champion
iTrader: (9)
Tool - It is pretty flat but coarse bitumen, i went for a gander last week, and it appeared to be quite slipery, although it has sat unused for quite a while. Steve has a blower so that should get rid of most the crap, and i believe they sprayed it with sugar water, so going forward grip should be ok,
could be a good place to use up all my old slightly chunked foam tires at clubbies.
Geeza ran foams on both gas and electric but chewed them up quite quickly, but i believe they were eagles and quite soft compounds with traction additive on them.
Drayton ran some orion rubbers, and after 4-5 runs they still looked in pretty good nick but it was pretty skaty for him. So i guess start out with foams and go from there.
could be a good place to use up all my old slightly chunked foam tires at clubbies.
Geeza ran foams on both gas and electric but chewed them up quite quickly, but i believe they were eagles and quite soft compounds with traction additive on them.
Drayton ran some orion rubbers, and after 4-5 runs they still looked in pretty good nick but it was pretty skaty for him. So i guess start out with foams and go from there.
#13
eheheheh true but its not like an ordinary site that has limited content for a particular subject or region, if it was so, then the site would be hella smaller... what you see on the front page is only 10% of the content... a portal which is nice and simple is not a portal... cause it prolly wouldn't have that much of an info...
that's how big OzRyderz is... but anyway, if you are not used to seeing something that rich in content than I can understand... can take a while to get used too...
What does SORMCC stand for? Let me take a guess... Sydney On Road M??SomethingSomething Car Club?
How does the lap time work? AMB Transponders? How many people attended last time?
that's how big OzRyderz is... but anyway, if you are not used to seeing something that rich in content than I can understand... can take a while to get used too...
What does SORMCC stand for? Let me take a guess... Sydney On Road M??SomethingSomething Car Club?
How does the lap time work? AMB Transponders? How many people attended last time?
#14
Tool - It is pretty flat but coarse bitumen, i went for a gander last week, and it appeared to be quite slipery, although it has sat unused for quite a while. Steve has a blower so that should get rid of most the crap, and i believe they sprayed it with sugar water, so going forward grip should be ok,