Latest results from the RC Hobby Zone race team in Adelaide !



SDMCC (Adelaide) Race results Sunday 13th July 2008


MT:

TQ GO 21 5 port Myles Cooper MM SCORP 16%

1st GO 21 5 port Myles Cooper MM SCORP 16%

2nd GO 28 Darren Neilson MM HB444 25%

Truggy:

TQ GO 21 7 port Glenn Boyd MM HB444 25%

1st GO 21 7 port Glenn Boyd MM HB444 25%

Buggy:

1st GO 21 5 port Peter McGill MM HB444 25%


Thats awesome results boys ! :D

go the Adelaide boyys,

whos that Darren Neilson guy though i think he let the team down a bit :D:eek:

Anyone ever used A Novarossi turbo plug and which one.
We have some C6TF here available and was wondering how would perform.

I don’t know if you can technically call me part of the RCHZ team, until that rather large cheque clears that is :p:lol::p

can anyone tell how to fix the bottom leaning out on my 3port race

Thats a cold plug .. id imagine you would have to lean it to get it to idle well ..

If it is lean bogging from about half tank then richen HSN about 2/8

If its revving up high after a jump or when you come in then you need to lean off the LSN and lower your idle gap .. also check tank seal and pipe seals ...

If none of this helps email me and we will see if we can get it sorted for you

Cheers MM

[email protected]

thanks mark do have top and bottom needle settings just as a referance,as i`ll be resetting back to a .7 mm idle gap pretty sure it`s fattend out to about1.5 mm(these little 3 ports sound like they could cut loose with a bit of a mod:eek:)

Yeah they go great with a stage 5 definitely !

we got 2.2 hp at the wheels on a dyno on its 5th tank ... :batman:

Congratulations to Mick Flemming on getting 2nd place in his A Main truggy event with his new .28 Go 6 Port !

Mick is the guy on the left with the gotee ! hahah ;)

Mick is now a semi sponsored MM driver and representative in Tassie and is one of the nicest guys you could hope to meet ! Cheers for representing so well Mick !

well done to your driver mark where is that trax at:cool:

in tassie somewhere .. not sure .. :confused:

1/8 on road
 

hey any1 using the go engines in 1/8 on road ? humm is it a conversion of head or is it a complete new engine? mark what are they costing from you ?

The Tasmanian offroad track featured in the story above is in Devonport, on the state's north-west coast. The club (North West R/C Car Club) is going well and growing strongly. Club website is at www.nwrccc.com - and includes results from the race in question.

Well done to Mick for his drive, and well done to Massive Mods for supporting guys in fledgling and growing clubs.

Cheers
scott

We have sold about 12 so far. $299.00 this is the original 7 port on road but the new on road is still in development. Ill be finished with it some time before dec ..

M