Team Br00d Racing Motors
07-13-2007, 11:06 AM
#4006
That's right. Sometimes as low as 6.3, but rare ... 6.5-7.5 is very typical. On a medium sized outdoor track with about a 110-120 foot straight I was gearing at 6.68. With F-Brushes and breaking in for 5 minutes the car felt like it was shifting into second gear at about 80 feet. 
07-16-2007, 09:37 AM
#4007
Registered User
iTrader: (2)
Join Date: Jun 2004
Location: ROAR HAD ME BANNED FROM RC TECH.
Posts: 2,025
Trader Rating: 2 (100%+)
CJ gives Brood yet another national TQ at this years Paved Nationals. He also got 2nd overall, very good racing. Good job, CJ!
07-16-2007, 09:51 AM
#4008
He had a great race and was robbed by ROAR officials from "NO" calls and lack of the announcer calling the leader in lapping.
Fred
07-16-2007, 10:02 AM
#4009
Registered User
iTrader: (2)
Join Date: Jun 2004
Location: ROAR HAD ME BANNED FROM RC TECH.
Posts: 2,025
Trader Rating: 2 (100%+)
Ah, well, that's disappointing. LiveRC showed CJ Redelfs as Stock TQ, apparently that's not the case.
Regardless, he put in quite a show and represented himself, and Brood well.
Let's not focus on the negatives of the event. It went off really well all things considered, SIR put up a good show of support to keep this alive and most people are sounding like they had a good time. I am hearing of the typical ROAR mistakes, but it's to be expected from a ROAR event... Doug may not have called the race as everyone would have liked (did see a lot of bitching on LiveRC) BUT he's a good announcer and way better than 99% of the guys calling races in the northwest. Anyone remember NWIC #5 in Spokane? A blind mute could have called a better race then that guy.
Regardless, he put in quite a show and represented himself, and Brood well.
Let's not focus on the negatives of the event. It went off really well all things considered, SIR put up a good show of support to keep this alive and most people are sounding like they had a good time. I am hearing of the typical ROAR mistakes, but it's to be expected from a ROAR event... Doug may not have called the race as everyone would have liked (did see a lot of bitching on LiveRC) BUT he's a good announcer and way better than 99% of the guys calling races in the northwest. Anyone remember NWIC #5 in Spokane? A blind mute could have called a better race then that guy.
07-16-2007, 02:10 PM
#4010
Thanks guys.
My brood powered car (batts) and motor tuned by Garrett provided all the rip I needed all weekend long.
I didn't get the TQ, but I did put down the fastest qualifiing run in the stock class for the weekend.
Go Brood!!
My brood powered car (batts) and motor tuned by Garrett provided all the rip I needed all weekend long.
I didn't get the TQ, but I did put down the fastest qualifiing run in the stock class for the weekend.
Go Brood!!
07-18-2007, 07:01 AM
#4011
Just wondering if the "V2 Element 19T Pro" listed on the site is the old element 19T or the new 2007 version, thanks 
07-18-2007, 08:20 AM
#4012
Registered User
iTrader: (2)
Join Date: Jun 2004
Location: ROAR HAD ME BANNED FROM RC TECH.
Posts: 2,025
Trader Rating: 2 (100%+)
Old V2.
07-18-2007, 02:26 PM
#4013
Thanks Wes, i suppose the V2 part was more of a give away that it was the old motor. It was the laydwon version i was looking for (
must remember the glasses )
must remember the glasses )
07-20-2007, 01:53 PM
#4014
Tech Initiate
No more IB4200
There's no IB4200 since a couple of week. Will the batteries be available soon ? Since I try them I don't want to race others...
07-23-2007, 07:25 PM
#4016
there was some problems with the electrolite that ib was using....we pretty much ran out at the perfect time, the new batch of cells is supposed to be far more stable than the last few batches, much better for you guys.....
they should be in mid next month or so...
07-23-2007, 07:51 PM
#4017
Registered User
iTrader: (2)
Join Date: Jun 2004
Location: ROAR HAD ME BANNED FROM RC TECH.
Posts: 2,025
Trader Rating: 2 (100%+)
Sorry Josh, I have been away from the computer most of the week and missed your PM's. You have a PM.
We also have something exciting to share with everyone, there will be a more official announcement but we're releasing a new edition stock motor. It has been awhile since any "named" motors have come out on the market, with the brushless hooplah and all, but we're very proud to announce a Travis Schreven edition motor; the Micro Peeler CO27. This is going to be a limited edition motor and only available while they last.
More info coming soon, but the motor is available for purchase now on the web site. I will have a picture of it soon, the new label is very cool.
-Wes
We also have something exciting to share with everyone, there will be a more official announcement but we're releasing a new edition stock motor. It has been awhile since any "named" motors have come out on the market, with the brushless hooplah and all, but we're very proud to announce a Travis Schreven edition motor; the Micro Peeler CO27. This is going to be a limited edition motor and only available while they last.
More info coming soon, but the motor is available for purchase now on the web site. I will have a picture of it soon, the new label is very cool.
-Wes
07-23-2007, 08:54 PM
#4018
Awesome!
I gotta get a peelerc027
I gotta get a peelerc027
07-30-2007, 06:28 AM
#4019
Tech Rookie
Hi, Does anyone have some dyno figures as to what a Brood CO27 motor pushes out?