Spec-R R1
#916
Tech Apprentice
Just 1 more question....lets say I want to make my rear car 3.5 toe in... I'm going to use rr 2 out and rf 3 out... Is that mean the track wide will be wider by 2.2 + 1.4 = 3.6.....
Is that correct?
Thanks
#918
Tech Rookie
My S1 came today. But there is one bag missing . The bag with the plastics for the steering crank. Can somebody tell me, if there are more parts in this bag? Or just the 3 plastics?
I´ve sent an e-mail to Spec-r, maybe they send me a bag...
greetings,
Chris
I´ve sent an e-mail to Spec-r, maybe they send me a bag...
greetings,
Chris
#919
Tech Master
iTrader: (8)
New Chassis Options
I see Spec R is releasing new optional chassis...
Type A Upper Deck
http://www.spec-r.com/default/index....roducts_id=485
Type B Upper Deck
http://www.spec-r.com/default/index....roducts_id=486
2.2mm Chassis
http://www.spec-r.com/default/index....roducts_id=484
I'm interested in them all...
I wish I could have more track time with my car. But these options will be on my shopping list
Type A Upper Deck
http://www.spec-r.com/default/index....roducts_id=485
Type B Upper Deck
http://www.spec-r.com/default/index....roducts_id=486
2.2mm Chassis
http://www.spec-r.com/default/index....roducts_id=484
I'm interested in them all...
I wish I could have more track time with my car. But these options will be on my shopping list
#921
I'm very interested in the S1 to get back into electric and RC. I have read this thread from the front to back.
My question is what budget combo/or pieces should I get for the ESC/BL Motor and what batteries?
My question is what budget combo/or pieces should I get for the ESC/BL Motor and what batteries?
#922
Tech Regular
iTrader: (14)
What kind of characteristics should the different thickness give?
I see Spec R is releasing new optional chassis...
Type A Upper Deck
http://www.spec-r.com/default/index....roducts_id=485
Type B Upper Deck
http://www.spec-r.com/default/index....roducts_id=486
2.2mm Chassis
http://www.spec-r.com/default/index....roducts_id=484
I'm interested in them all...
I wish I could have more track time with my car. But these options will be on my shopping list
Type A Upper Deck
http://www.spec-r.com/default/index....roducts_id=485
Type B Upper Deck
http://www.spec-r.com/default/index....roducts_id=486
2.2mm Chassis
http://www.spec-r.com/default/index....roducts_id=484
I'm interested in them all...
I wish I could have more track time with my car. But these options will be on my shopping list
#923
Tech Elite
iTrader: (84)
Should give you more mechanical grip. If you guys look on the website there are a bunch of other goodies like aluminum bones for the rear driveshafts, alum. Layshaft and a few other things. Also to let everyone know I have moved on to another chassis brand but feel free to pm me with any questions regarding the r1 and setup help.
#924
Tech Regular
has anyone tested another mfg`s casterblock on the r/s1? i would like one that isnt as soft as the std one
havent had a broken part on my car yet, but dont like the soft plastic in the blocks
havent had a broken part on my car yet, but dont like the soft plastic in the blocks
#926
Does anyone know if the sakura zero front oneway spool will fit the R1
Last edited by sghx60; 02-08-2013 at 06:04 AM.
#927
Tech Master
iTrader: (8)
Not sure but I know the Xray multi diff should fit. If you want to fork out the $$$...
http://www.nexusracing.com/product_i...oducts_id=3643
http://www.nexusracing.com/product_i...oducts_id=3643
#928
Tech Addict
iTrader: (11)
Shock caps.
Wrote awhile back with regards to problem with one of my shock caps not being able to fit securely. Wrote to Spec R and they sent me a replacement shock cap that fits snugly and eliminated the problem.
They also sent extra shock ball end which snapped whilst I was assembling.
Thumbs up for good customer service!
They also sent extra shock ball end which snapped whilst I was assembling.
Thumbs up for good customer service!
Just bought a S1 and n the midst of assembling.
Ran a T3 11' prior.
A couple of questions,
1) Anyone has limited travel or rather stiff (vertically)front and rear arms with e standard 50mm shafts and recommended tie rods lengths? If so, what is the recommended remedy?
2) I seem to have problems securely a shock cap tightly on one of my shocks. Anyone has issues? Recommended or suggested remedy?
3) Read that some of u use additional flange bearings 5x8x2.5..improved fit and performance?
4) Recommended to run with some slop in the front and rear arms or fill the gaps with spacers?
Appreciate your inputs.
Thanks.
Ran a T3 11' prior.
A couple of questions,
1) Anyone has limited travel or rather stiff (vertically)front and rear arms with e standard 50mm shafts and recommended tie rods lengths? If so, what is the recommended remedy?
2) I seem to have problems securely a shock cap tightly on one of my shocks. Anyone has issues? Recommended or suggested remedy?
3) Read that some of u use additional flange bearings 5x8x2.5..improved fit and performance?
4) Recommended to run with some slop in the front and rear arms or fill the gaps with spacers?
Appreciate your inputs.
Thanks.
#929
Tech Master
iTrader: (75)
Have an issue
Bought the 2 generation drive shafts & broke one of the swing shafts the ones that came with the kit read Spec - R XP and the replacement shaft that I bought now twice.... read spec-r XR.
The XR binds and does not fit the XP work perfectly anyone have this problem?
Thxs
Bought the 2 generation drive shafts & broke one of the swing shafts the ones that came with the kit read Spec - R XP and the replacement shaft that I bought now twice.... read spec-r XR.
The XR binds and does not fit the XP work perfectly anyone have this problem?
Thxs
#930
Tech Elite
iTrader: (84)
Have an issue
Bought the 2 generation drive shafts & broke one of the swing shafts the ones that came with the kit read Spec - R XP and the replacement shaft that I bought now twice.... read spec-r XR.
The XR binds and does not fit the XP work perfectly anyone have this problem?
Thxs
Bought the 2 generation drive shafts & broke one of the swing shafts the ones that came with the kit read Spec - R XP and the replacement shaft that I bought now twice.... read spec-r XR.
The XR binds and does not fit the XP work perfectly anyone have this problem?
Thxs