veecee

iTrader: (34)

From the Aussie forum...

If you have a good setup, please post with this PDF file.

jim_ed

is there a way to save it as an jpg or something.?
-Idont have a printer,and its nicer to have it all on the computer. Then alot of papper. Its easier to share setups in computer form.

InZane

iTrader: (2)

Install Cute PDF - it's freeware.
When you print your set up sheet it is saved as a non editable .pdf document on your computer.

barneveld

@Veecee:

Thanks for the tip!

Marcel.

Tommi Makkinen

iTrader: (28)

i wonder if these tires are allowed to be used in the TAC finals in Thailand?

sijorg

... from the Aussie forum....

would be interested in a link to this if possible please.

Cheers from accross the ditch in NZ

prime

iTrader: (3)

Hey guys thought i'd share my Buzzin Hornet Jordan. I did this one originally about 12 yrs ago with my old F1, so this is reliving my youth... Much better second time around.







Had its first run yesterday, Survived the run, bit of ware on the front wing though
but worse can't get it to handle, i've read the past few pages and i too am having the high speed jiggles/wobbles, one time it goes right and then left, i have done some mods to try and sort it out, i can now hold it flat down a straight, but trigger finger application must be spot on and gentle, looking forward to hearing any setups or solving of the problem. I tightened both the shock collar, and friction plate nut down, as well as changing the t plate to the Tamiya soft one... little better but not great. what is the better tyre options for the car as apposed to the standard kits

thanks
Prime.

border r/c

whow great body!

RonF

iTrader: (9)

Prime,
Nice pics. The side is a little blurry, but still looks great. Ive heard B compound up front helps the 104. Perhaps the others can confirm this.

I watched the Tamiya driver run his in Marlboro McLaren colors a few weeks ago in Aliso and his was hooked from start to finish. He is supposed to have an article on setup for this car very soon. Keep checking the Tamiya USA website.

veecee

iTrader: (34)

Great work there Prime!

There was a TCS race at Tamiya USA over the weekend and looks like there were quite a few F104s. If any of you were there, it would be great to hear from you and see your setups.

Cheers,

Vinny

414MPH

iTrader: (8)

All I can say from my observations at Alliso this weekend is... The F-104 is not yet on par with the F0103, and that was with David Jun wheeling the F-104.

Time will tell.

BP SHADOW

iTrader: (24)

Ok, but the 103 has only what? 15 years of development behind it, vs like 4 months for the 104. The 103 has been and will continue to be a great car, and with a little sorting, the 104 will be right there

veecee

iTrader: (34)

Yeh I think that is to be expected. The chassis is still quite new, especially compared to the F103. Also the chassis is a fair bit narrower which could explain some of the nervousness people are experiencing. I think the tyres are a bit narrower too?

Arahawak

iTrader: (32)

Does somebody has David's setup ?

prime

iTrader: (3)

here here....that would be sweeet to get JUNs setup. thanks to all those comments, it means a lot coming from fellow F1 fans.