3 racing new F1
#3946
#3948
Tech Champion
iTrader: (17)
My son and I had fun with the FGXs yesterday. I should not have changed gearing on mine. I switched to a 25 from a 22 pinion. Way to big of a jump. Of course I left my gears at home... The car was a little too stiff for the track, but I just drove it anyway for the day. It was still really good. I was my son's first time racing this chassis and he loved it. His was sprung softer and geared right. He had a better fast lap than I did. We had no issues keeping up with the direct drive cars on the long straight. We just need more practice.
#3950
Tech Master
iTrader: (19)
My son and I had fun with the FGXs yesterday. I should not have changed gearing on mine. I switched to a 25 from a 22 pinion. Way to big of a jump. Of course I left my gears at home... The car was a little too stiff for the track, but I just drove it anyway for the day. It was still really good. I was my son's first time racing this chassis and he loved it. His was sprung softer and geared right. He had a better fast lap than I did. We had no issues keeping up with the direct drive cars on the long straight. We just need more practice.
#3951
Tech Champion
iTrader: (17)
Yes, Ozite. There is lumpy concrete due to a crack in the floor under the carpet in one corner and the car is not taking it well. Normally I can go flat out in a section like this, straight to sweeper. I'm thinking one step softer spring and add switch to the 2 hole piston in the damper. I'll probably have to go up a mil in ride height so the rear end doesn't drag due to chassis role.
Last edited by liljohn1064; 12-24-2012 at 11:03 AM.
#3952
Tech Adept
#3954
Tech Adept
#3955
#3958
Tech Fanatic
I'm a bit confused; what is the difference between the Exotek FGX-EFX V1 and the V2?
I don't see any changes! The IFS mount will be a separate part from the chassis, and the adjustable upper front arms shown in the pic of the chassis are not part of the chassis set, but are also sold separately; so what are the differences between V1 and V2?
Am I missing something?
I don't see any changes! The IFS mount will be a separate part from the chassis, and the adjustable upper front arms shown in the pic of the chassis are not part of the chassis set, but are also sold separately; so what are the differences between V1 and V2?
Am I missing something?