Schumacher Corner
#8822
Thanks again adrian for your tips. I finally had the time to rebuild my shocks lastnight and your method works great. I had one shock that gave me a hell of a fight but after i realized taht i didnt put the piece with the foamies in it worked. Long night! :-(
#8824
Where you running, Dave?
Rob
Rob
#8826
Not yet. Chris is sending it out 2nd day FedEx today.
Rob
Rob
#8829
hey guys i was just wanting to ask for some setup advice. My car is over rotating on corner exit from slow corners, what would you suggest?
1 more thing what is the difference between the thurst bearing and pro thurst bearing
1 more thing what is the difference between the thurst bearing and pro thurst bearing
#8830
Tech Champion
iTrader: (32)
Originally posted by John_S
hey guys i was just wanting to ask for some setup advice. My car is over rotating on corner exit from slow corners, what would you suggest?
1 more thing what is the difference between the thurst bearing and pro thurst bearing
hey guys i was just wanting to ask for some setup advice. My car is over rotating on corner exit from slow corners, what would you suggest?
1 more thing what is the difference between the thurst bearing and pro thurst bearing
#8831
yeah i have grey springs on rear and blue on front with 40 oil front and rear and 2 hole on the pistons, all other rear settings are standard
#8832
Tech Champion
iTrader: (9)
Originally posted by John_S
hey guys i was just wanting to ask for some setup advice. My car is over rotating on corner exit from slow corners, what would you suggest?
hey guys i was just wanting to ask for some setup advice. My car is over rotating on corner exit from slow corners, what would you suggest?
I raced the mission again for the first time in a few months, i went back to near kit, and started going in new directions re roll center etc, asphalt on foam i always preferred short low links, i started going the other way, and i got rid of the mod corner push it had, i think the front end is pretty good now, just need a little work on the rear. Still looking forward to the release of the BMI chassis, as my kit one is getting worse for wear.
#8834
Tech Rookie
indoor racing
Big i need and i really would like to know if there is any in door tracks for 1/10th and 1/12th scale on road cars, around leavenwoth ks or lawrence ks or topeka ks.?
#8835
Live - check out Hutchinson, KS. The track is at High Performance Hobbies. Indoor carpet, and they run 1/10th rubber (Novice), 1/10th foam, and 1/12th foam.
Website is www.hphobbies.com
Not TOO far from Lawrence/Topeka.
Rob
Website is www.hphobbies.com
Not TOO far from Lawrence/Topeka.
Rob