MUGEN SEIKI MRX5
#1021
Tech Addict
how heavy is your car with body on? how many gram?
#1022
Tech Regular
After all sorted out handling and 2nd race the car is confirm the CAR Of The Year 2010.
In our tropical climate please ream holes in the receiver box to cool down the receiver, (M11x receivers) and treadlock key important screws.
I had a blast driving it for the mains, screws coming loose due to heavy crash cost me my mains, that about me to improve. Thanks Ralph, Team Brooklyn, and guys who had advise me on this car. Got myself 3 new kits to built for a practice car, spare car and race car.
In our tropical climate please ream holes in the receiver box to cool down the receiver, (M11x receivers) and treadlock key important screws.
I had a blast driving it for the mains, screws coming loose due to heavy crash cost me my mains, that about me to improve. Thanks Ralph, Team Brooklyn, and guys who had advise me on this car. Got myself 3 new kits to built for a practice car, spare car and race car.
#1023
Receiver Mounting?
How are you guys mounting the receiver? In particular the M11X receiver?
Do you mount it on the main plastic radio module or on the removable cover?
Any pics would be great to see.
Do you mount it on the main plastic radio module or on the removable cover?
Any pics would be great to see.
#1024
Tech Regular
Stuff it inside the box and add sponge as i ream large holes on the cover to cool the receiver. Just change to 4pks today with the new receiver also did the same thing i smash 1 car to bits and pcs with a glitch problem and when repairing i have my receiver melting inside the box it was the 414 receiver.
#1025
receiver box
I was at the Xceed cup in Shanghai on the weekend. I had time to pull my car apart and found the receiver box hitting the chassis
During the race, I know 2 runaway MRx5. They either solved the problem by screwing 2 screws into the top plate or file the chassis so the receiver box not touching the chassis.
See if this work.
Also start checking and maintain more often the oneway on the 2nd speed. It will be a problem specially if you run on tight tracks like ours.
Goooood racing.
During the race, I know 2 runaway MRx5. They either solved the problem by screwing 2 screws into the top plate or file the chassis so the receiver box not touching the chassis.
See if this work.
Also start checking and maintain more often the oneway on the 2nd speed. It will be a problem specially if you run on tight tracks like ours.
Goooood racing.
#1026
I was at the Xceed cup in Shanghai on the weekend. I had time to pull my car apart and found the receiver box hitting the chassis
During the race, I know 2 runaway MRx5. They either solved the problem by screwing 2 screws into the top plate or file the chassis so the receiver box not touching the chassis.
See if this work.
Also start checking and maintain more often the oneway on the 2nd speed. It will be a problem specially if you run on tight tracks like ours.
Goooood racing.
During the race, I know 2 runaway MRx5. They either solved the problem by screwing 2 screws into the top plate or file the chassis so the receiver box not touching the chassis.
See if this work.
Also start checking and maintain more often the oneway on the 2nd speed. It will be a problem specially if you run on tight tracks like ours.
Goooood racing.
#1027
Tech Elite
iTrader: (36)
It's the four screws holding the throttle and steering servo to the radio mount. The ones in the middle where the mounting ear for both over lap. Steering servo on the inside and the throttle servo on the outside.
I took the material off of the radio box, around .6mm. Plenty of clearance.
I took the material off of the radio box, around .6mm. Plenty of clearance.
#1028
Tech Initiate
Stuff it inside the box and add sponge as i ream large holes on the cover to cool the receiver. Just change to 4pks today with the new receiver also did the same thing i smash 1 car to bits and pcs with a glitch problem and when repairing i have my receiver melting inside the box it was the 414 receiver.
#1029
Congrats MRX5 Tq & wins 2010 Kraceway U.S.Open Championship
Special Thanks to Mugen Seiki USA ]
for there support for our 5th Annual 2010 Kraceway U.S. Open Championship
Congrats Mugen Team Driver Jason Conley Tq & locks in the Win in the Triple A Mains
The U.S.Open Championship has been mostly a sedan race but building it to grow the 1/8th Class
8 out of the 9 cars were Mugen in the Triple A Mains in 1/8th
for there support for our 5th Annual 2010 Kraceway U.S. Open Championship
Congrats Mugen Team Driver Jason Conley Tq & locks in the Win in the Triple A Mains
The U.S.Open Championship has been mostly a sedan race but building it to grow the 1/8th Class
8 out of the 9 cars were Mugen in the Triple A Mains in 1/8th
#1030
Tech Regular
It is the 604 receiver, not sure but reaming the hole helps, the new 4PKS receiver is great and by the way get the local 4pks from our LHS not much diff from hk and you will need the service trust me
#1031
Tech Initiate
How much you got yours ? HK is selling at S$500 with rx.. 604 if i am not wrong it is with the old 4PK. 4PKS comes with 614.
#1032
Tech Regular
Gave away my M11x already too heavy for the long main stint.
#1033
Tech Initiate
My old M11 was even heavier !! That is why my driving will worsen reaching to the end of the race..
#1034
Tech Regular
Backspace: Buy what feels good in your hand,
FYI : I just sold of my 1 race old car complete with the CSO metals gears and nova engine.
The next 5 will try the carbon wheel thing, CSO gear, all Freemax option parts,Ceramic bearing. This kit will be for sale after the 19/12 race..
FYI : I just sold of my 1 race old car complete with the CSO metals gears and nova engine.
The next 5 will try the carbon wheel thing, CSO gear, all Freemax option parts,Ceramic bearing. This kit will be for sale after the 19/12 race..
#1035
MRX5's on track having fun - Pop Kerr Memorial - England Park Raceway