motoko

iTrader: (9)

Hey guys

Would these work on the Cyclone TC?
http://os.3racing.hk/products.php?products_key=2076

I can't find the Hotbodies drive shafts anywhere.

bmmer701

iTrader: (17)

setup in titc of andy and hara? thanks.

k_bojar

iTrader: (30)

yes, those will work...the cyclone and cyclone TC use a 44mm shaft - only the TCX uses a different size shaft in the front

rack

iTrader: (68)

what is the drive ratio HB TCX

k_bojar

iTrader: (30)

1.96

nf_ekt

iTrader: (115)

Have you put some decent run-time in on the cyclone / gear-diff combo? I want to try it but I also want to know if it's had issues with performance or sloppiness due to all the shimming required. Thanks .

k_bojar

iTrader: (30)

i haven't run my car yet - gonna be next weekend..

Bubblehead

39/20 = 1.95

motoko

iTrader: (9)

If anyone is looking for a Cyclone TC, I have one for sale on the forums.

http://www.rctech.net/forum/r-c-item...rum-servo.html

mtsb4

anyone know if the 3racing conversion ball diff and still use 44mm shaft?

Dog Bone

iTrader: (4)

I've got two Exotek chassis', and on both of them, a screw on one of the rear blocks has blown through the carbon chassis - the countersink was a bit too deep, and an impact drove the screw sideways into the carbon, splitting it....

I was able to fix one of them, but the other one is toast as the chassis is cracked...

Can anyone give me a list of other supplies of TC chassis? There's Smokem, but who else?

Dog Bone

iTrader: (4)

Erk, my bad. Smokem seems to have a replacement chassis for the TCX, not the TC....

Giorgio

iTrader: (1)

Exotek.

It's way better than the original.

AGNO

Exotek is a good chassis, perhaps too hard in the middle, sometimes the TC original it works better!

Dog Bone

iTrader: (4)

I'm looking for something other than another Exotek chassis guys, as I've already had two fail.

But thanks for suggesting Exotek