Geberit

This is the new one: http://www.reedypower.com/products/details/601/

Infinite 12th

iTrader: (3)

Thanks I thought they might have had higher mAh

icefish

dear all tc6 driver, i'm having a bad issue with my tc6 belt problem, it fray all my lipo battery as picture in attachment, pls help on this issue. Does anyone have the same issue as like me? any solution to solve it?

hacker

iTrader: (141)

move it more outboard

icefish

Dear hacker, I've try, but it will move in after few run, and I can't move in while on race within 5 minutes.

cwoods34

iTrader: (10)

I use tape instead of a velcro strap, along with 2 small strips of servo tape near each end. In slower classes you usually don't need the servo tape! Even on a large asphalt track running mod I had no issues with battery movement.

z3zinho

Icefish, have you looked into the Reflex belt tensioner/battery spacer?

burgboyz

iTrader: (70)

Please post some pics of your car without the battery in it.

CristianTabush

iTrader: (13)

This is a recurrent problem with all TC6's. You can either put a couple of strips of servo tape on the stock spacer to space the battery out a bit, or you can run our battery spacer that doubles as a belt tensioner.

chestnutjazz

iTrader: (6)

Will at tc4 roll bar kit fit the tc6? W/O any modifications?

chevtech23

iTrader: (2)

I just installed the reflex belt tensioner on both of my TC6 and it cured my clearance issues.

Bappe

Havent read much about the tc6.1 or tc6 for that matter, but im getting curious about the car

how is the quality in the car compared to the others? (tamiya xray)

how durasble is the car?

whats the ups and downs compared to the others?

grippgoat

iTrader: (8)

I took my stock battery stop, put a piece of fuel tubing on it, and flipped it upside down.

-Mike

Chaz955i

iTrader: (5)

I just took a section of antenna tube and shoe gooed it in as a stop. Has worked fine for over a year and took all of a minute to rig up. Do that or go with something like what Reflex sells.

Jochim_18

iTrader: (10)

I'm doing a little project on my TC6 using Shorty Lipo Pack...