NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#7502
I have the X12 17.5, but does not work well with HW, I have also GM and it work a lot better, more faster and cold , for 10.5 the Xerun motor is awesome .
#7503
Hi Guys
Just making you all aware that when the v3 is released we will still be continueing the 2.1 verson at a reduced price and the software development will also continue for the 2.1v and whoever has a 2.0v
so dont stress you will not be lofet out in the cold .
happy new year everybody
Angelo
Just making you all aware that when the v3 is released we will still be continueing the 2.1 verson at a reduced price and the software development will also continue for the 2.1v and whoever has a 2.0v
so dont stress you will not be lofet out in the cold .
happy new year everybody
Angelo
Also, is Hobbypartz an authorized distributor?
LIP
#7504
Tech Elite
iTrader: (1)
Hello,
I just landed in Colombia - Southamerica and will stay here for a while due to job assignment.
Regional onroad touring champs are based on 10.5 brushless motor, i will be using 10.5 hobbywing xerun motor and 120amp hobbywing ESC.
Can you point me out on the direction of FDR and programming of ESC to use with this motor ?
I installed/updated my ESC and 2-in-1 program box but it doesnt allow me to modify start rpm parameter ... what im doing wrong ?
thanks,
I just landed in Colombia - Southamerica and will stay here for a while due to job assignment.
Regional onroad touring champs are based on 10.5 brushless motor, i will be using 10.5 hobbywing xerun motor and 120amp hobbywing ESC.
Can you point me out on the direction of FDR and programming of ESC to use with this motor ?
I installed/updated my ESC and 2-in-1 program box but it doesnt allow me to modify start rpm parameter ... what im doing wrong ?
thanks,
#7505
Hello,
I just landed in Colombia - Southamerica and will stay here for a while due to job assignment.
Regional onroad touring champs are based on 10.5 brushless motor, i will be using 10.5 hobbywing xerun motor and 120amp hobbywing ESC.
Can you point me out on the direction of FDR and programming of ESC to use with this motor ?
I installed/updated my ESC and 2-in-1 program box but it doesnt allow me to modify start rpm parameter ... what im doing wrong ?
thanks,
I just landed in Colombia - Southamerica and will stay here for a while due to job assignment.
Regional onroad touring champs are based on 10.5 brushless motor, i will be using 10.5 hobbywing xerun motor and 120amp hobbywing ESC.
Can you point me out on the direction of FDR and programming of ESC to use with this motor ?
I installed/updated my ESC and 2-in-1 program box but it doesnt allow me to modify start rpm parameter ... what im doing wrong ?
thanks,
For motor Xerun 10.5 use the 930STOCK
Starting with these parameters
FDR 5,5/5,7
9 - 35 °
10 - 18/0,1sec
12 - 20°
13 - 4000
14 - 0,1sec
15 - 300
#7506
The V3 will be available through CRC east coast .Hobbywing management has decided to only supply the new range of the v3 with more to come for the high end range to only distributors that can support the product with tech support and track support not just sell with no support.
#7508
Tech Apprentice
Sorry to sound thick but could someone tell me the difference between the V2.0 and V2.1?
#7509
#7511
Tech Apprentice
Also where can I get the supercharge software for it so I can run turbo etc
#7512
Tech Adept
iTrader: (16)
The regular 120 will run 2s or 3s. The 120a 1s will not work with 3s but will run on 1s with out a booster or reciever pack. You should be able to download the software from the hobbywing site. I would suggest getting the lcd programming box as it allowes you to connect to a laptop for updates and changing between software.
#7513
Tech Apprentice
The regular 120 will run 2s or 3s. The 120a 1s will not work with 3s but will run on 1s with out a booster or reciever pack. You should be able to download the software from the hobbywing site. I would suggest getting the lcd programming box as it allowes you to connect to a laptop for updates and changing between software.
#7514
The V3 will be available through CRC east coast .Hobbywing management has decided to only supply the new range of the v3 with more to come for the high end range to only distributors that can support the product with tech support and track support not just sell with no support.
Any update on the release date? I need a new esc but will be bummed if I get the V2.1 only to have V3 come out soon afterwards.
LIP
#7515
I've no issue with that...only problem might be lack of competition will increase the price...there is always the option from buying it offshore if that happens I guess.
Any update on the release date? I need a new esc but will be bummed if I get the V2.1 only to have V3 come out soon afterwards.
LIP
Any update on the release date? I need a new esc but will be bummed if I get the V2.1 only to have V3 come out soon afterwards.
LIP
Yes i understand your point but what we noticed was some of the hobbywing sellers were devalueing our product to get the customer through the door or to the online store sometimes low as 5% profit margins so they buy other products at the same time but at the expence of our product being known as just a cheap chinese brand which wasnt a nice statement as we also make orion,speed passion and hpi so we cant be that bad .
The price wont increase ill make sure of that but the support will be better and our reputation of just another cheap chinese product will start to fade .
it all about building an image and becoming more known as a high quality high performing brand to the western world and not just another cheap brand as known today .