jsinclair

iTrader: (3)

What is a common front track width ?
Thanks in advance

Joost K.

210mm is pretty common I believe...

Pro10noob

iTrader: (13)

It also depends on what type of front suspension your using
Corally, Asso R4, CRC, Xray you can't change track width.
Asso R5, Xenon, Kyosho, Yokomo, VBC Racing you can alter track width,

Regards Roy

puttekula

Is that really true?
http://www.redrc.net/2015/01/xray-x1...nium-bushings/

TOADYY

iTrader: (6)

I would say yes...

http://www.teamxray.com/teamxray/new...413f98c5b169a9

1.0mm : http://www.rcmart.com/xray-xr372318o...=595_1077_1730

RoyU

iTrader: (2)

Will it fit in the Serpent frontend lower arms?

TOADYY

iTrader: (6)

I don't know if the X-Ray version will work with Serpent but Serpent does have offsets available...

http://serpent.com/product/411030/

liljohn1064

iTrader: (17)

From what I can see, the X-RAY front end would work, but you have to custom fab a plate to make the track width wider, 210 mm or more with tires on for the front and get a widening kit for the rear. The X-10 link is only a 200mm car.

TyoBBS

In my country we mix 200 and 235mm in the same race. Next race we will use WGT like sophia body for 200mm.
Better for 235mm? Where to buy?
I have CRC with hub's IRS to extend 235mm.

thanks and regards

liljohn1064

iTrader: (17)

http://teamspeedmerchant.com/graphics/smr1875cover600Wide.jpg

joezjr

iTrader: (7)

I can't wait to get my roadkill. My usgt just won't sell

Pro10noob

iTrader: (13)

Roadkill--> US
RC-Devil--> Germany
VIP Vorlon---> Germany
Xray X10 with LAJF widening kit Everywhere and Sweden
CRC with widening kit but has sometimes probs with vibration on rear axle due to extension hubs.
Corally if you can find one
Associated RC10L---> e-bay or here
For examples

Regards Roy

joezjr

iTrader: (7)

Stormer has 2 Corallys for 199 a piece

TyoBBS

Thank you for all answers

Exist any WGT body for 235 chasis?

REGARDS

patorz31

Anyone pick up a VBC Lightning 10 235mm kit yet?