Pro 10: 235mm Le Mans Prototype Pan Car Discussion
#1878
Tech Apprentice
#1880
Tech Adept
Is it possible to use other than shorty batts for the VBC? ANd how does it look like with the weight distribution in the rear pod? The motor is quite far on the "heavy" side.
#1883
#1884
Tech Apprentice
Build is smooth and the carbon Quality is awesome.
Just two strange things with my kit:
1st the metal kingpin Pivots are a very tight fit an bind a Little bit.
i jused dry fluid to fix this Problem.
2nd the carbon brace of the pod is milled a Little bit on Position of
the screw holes. It's just approx 1mm, but it's enough so that the screws
are to Long. I put in a shorter screw to fix this Problem.
You could also use a shim.
Haven't drove it, but yes, you could put a normal sized 2s lipo in.
Just build it to see what i can do "better". I will use mkost of the parts
and build an own Version.
Just two strange things with my kit:
1st the metal kingpin Pivots are a very tight fit an bind a Little bit.
i jused dry fluid to fix this Problem.
2nd the carbon brace of the pod is milled a Little bit on Position of
the screw holes. It's just approx 1mm, but it's enough so that the screws
are to Long. I put in a shorter screw to fix this Problem.
You could also use a shim.
Just build it to see what i can do "better". I will use mkost of the parts
and build an own Version.
#1885
#1887
Tech Adept
Do you have to mount the esc on its side when using normal 2s?
Hmmm ,Emden? Is there any good track around there? I have been there a couple of times.
Last edited by puttekula; 02-03-2015 at 10:34 PM.
#1889
Tech Regular
iTrader: (28)
If we as a collective group of clowns who have fascinations with these awesome cars want them to make a comeback, a couple of things have to happen. First, the cars have to be viable for a track/big race promoter to welcome them. 2S in any form just isnt going to work. They have ran World GT mod at IIC and it has worked. 1S mod will be the same speeds as 12th scale mod but with way more grip and stability. As far as tires go, what do you guys think of utilizing WGT spec tires as well?
#1890
If we as a collective group of clowns who have fascinations with these awesome cars want them to make a comeback, a couple of things have to happen. First, the cars have to be viable for a track/big race promoter to welcome them. 2S in any form just isnt going to work. They have ran World GT mod at IIC and it has worked. 1S mod will be the same speeds as 12th scale mod but with way more grip and stability. As far as tires go, what do you guys think of utilizing WGT spec tires as well?