Grinder

iTrader: (2)

I will have everything with me. I am happy to have you on my team Robert. Now the only problem is I have to race against you with some HP.

ziggy12345

To help run in the engine you take out the PL set and put some lapping paste on the piston. Lapping paste is a fine grinding paste. You then move the piston in the liner so they are a very neat fit. The perfect fit is for the piston to be 1.7mm from the TDC position with a medium push.

After lapping the PL set has to be really cleaned out so no paste is left behind. The engine will give massive power from first use but wont last as long

Jamie Corrado

iTrader: (17)

Robert,
What's up man? Been awhile, hope all is well.

Welcome aboard, you are another great asset. As you know already, power will not be an issue anymore.

robert maestrey

Thanks guys appreciate all the kind words.....Jamie was hoping to see you down here for the open champs .....guess well catch up at the W-nats...all is well and I hope the same for you...keep in touch...

itchy b

iTrader: (2)

Grinder, ygpm

blanks596

iTrader: (20)

this may be a dumb question, but what does spool up mean in regards to engine or drivetrain and how is it good or bad?

colonrc

Congats Robert & Jamie

robert maestrey

Spool up basically refers to how fast your car or motor accelerates....Basically the lighter your drivetrain is and of course it helps if it is very free...meaning spins free as possible......all this helps the motor,car spool up faster....hope this helps

JetMD

iTrader: (1)

Hey Uriah. I just got a os speed 12tz and I was wondering if there is any modifications that you think might need to be made to it and if so, what would be the cost. I'm seriously considering getting your ceramic bearings for it and was also wondering what the total cost would be if I sent it to you to get done. You can pm me with the info if you like. Thanks.
Paul

tunerjetta29

iTrader: (6)

Quick question. If i order an engine from your site, whats the estimated time till shipment. Is it still 2-3 weeks or do you have some that are already finished that will ship out immediately? Im looking at the Murnan Modified Ninja R01 Full Ceramic . Thanks!

Grinder

iTrader: (2)

Hi. I have most engines in stock. However I do not have the Full Ceramic Ninja. I will have more of them ready in 2-3 weeks.

tunerjetta29

iTrader: (6)

What modded .21's do you have in stock?

Osiris 75

iTrader: (18)

Would the ceramic bearings for the Nova fit the X-12??

Grinder

iTrader: (2)

I have Novarossi 35+21, and the Sirio S21 STI with AAC. The modified Sirio will go on the website next week.

Grinder

iTrader: (2)

Yes, they will fit.