Xray XB4 thread
Tech Master
iTrader: (36)
Anyone whom is wanting a BugleBoy Racing front skid/bumper for their XB4, you may want to go to BugleBoy Racing's website as I believe there is only 5 XB4 front skid/bumpers remaining from their most recent run. Thomas at BugleBoy is a top notch fella. If they happen to be sold out, just drop him an email as he can produce more very quickly.
They are sold out
Tech Regular
Tech Apprentice
I did change them with huddy which i found pretty cheap as stock on a hobby shop here, and serviced my shocks and differentials with new oil. i run 5000 front and 1000 back and 350 back susp, 450 front susp. It runs pretty smooth on our track here which is carpet placed on dirt actually. now i am just waiting for new schummacher mini pins and lets go for a few fast laps :P
Spec Rs are only available through order to get them in greece and it would take about 2-3 weeks to get them on my hands...
I did change them with huddy which i found pretty cheap as stock on a hobby shop here, and serviced my shocks and differentials with new oil. i run 5000 front and 1000 back and 350 back susp, 450 front susp. It runs pretty smooth on our track here which is carpet placed on dirt actually. now i am just waiting for new schummacher mini pins and lets go for a few fast laps :P
I did change them with huddy which i found pretty cheap as stock on a hobby shop here, and serviced my shocks and differentials with new oil. i run 5000 front and 1000 back and 350 back susp, 450 front susp. It runs pretty smooth on our track here which is carpet placed on dirt actually. now i am just waiting for new schummacher mini pins and lets go for a few fast laps :P
Does anyone know if there are any other bodies to fit the 2016 XB-4 yet? The stock XRAY wide V2 bodies seem to be kinda scarce right now....not to mention expensive.
Tech Adept
iTrader: (13)
Does anyone know the theoretical lb/in rating of the 1 dot front springs?
Absolute Hobbyz // scratch that off as they are out of stock
Discount RC Store // sorry bro scratch them off as well as their out of stock.
GSHobby
Try eBay as well
Oh! If you have No luck with those give RC America a call.
Last edited by Norse; 01-26-2016 at 07:06 PM.
Hey my friend for a 16XB4 body check out Penguin RC bodies. They have a V2 for the 16 XB4 that will cost you $17 US dollars plus another $7 to ship.
17 US dollars plus an additional. Sorry shipping is close to 7 pounds thus Int. Shipping will cost you an additional $10
Tech Regular
iTrader: (5)
Hi Bent, finished putting my XB2 together. Beautiful kit!
What roll center holes were you using on Malins Buggy?
Could you please post a pic of the homemade chassis stiffener that attaches to the battery brace? Thanks!
What roll center holes were you using on Malins Buggy?
Could you please post a pic of the homemade chassis stiffener that attaches to the battery brace? Thanks!
Rear wheel nut coming loose
Bit of an odd experience but my right rear wheel nut seems to loosen after a 5 minute run. I run on indoor astro, XB4 pretty much stock and have not experienced this before.
Anybody else run into this?
Anybody else run into this?
If you are not using locknuts put some blue Loctite on the threads to help reduce the potential for a wheel to come off during a run. the right side front and rear are more prone to loosening due to the thread and wheel rotations.