NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#3421
HW120A
Just back from TITC, happy time with many friends and hobbywing drivers , and ANgelo,you are a nice guy.
Finally we took TQ, A1, A4,A5 in open brushless class which is the battle of ESC factories. For me, A4 is the best work I can do, and I'm very satisfied with the new FW 110211 for this race.Here I would like to share the final settings of my Xerun 120A V2.1.
Motor. Handout SP 11.5 v3 about 5 degree in the endbell.
FDR 6.9
Ddrs 9
Boost 40
Turbo 23
Turbo slope 18/0.1
Turbo delay 0.2
Boost start 4000rpm
Boost punch 300
After 5min race, motor temp lower than 80c.(35c air temp)
Nice!
Finally we took TQ, A1, A4,A5 in open brushless class which is the battle of ESC factories. For me, A4 is the best work I can do, and I'm very satisfied with the new FW 110211 for this race.Here I would like to share the final settings of my Xerun 120A V2.1.
Motor. Handout SP 11.5 v3 about 5 degree in the endbell.
FDR 6.9
Ddrs 9
Boost 40
Turbo 23
Turbo slope 18/0.1
Turbo delay 0.2
Boost start 4000rpm
Boost punch 300
After 5min race, motor temp lower than 80c.(35c air temp)
Nice!
Cheers
Ren
#3422
Tech Elite
iTrader: (15)
Just back from TITC, happy time with many friends and hobbywing drivers , and ANgelo,you are a nice guy.
Finally we took TQ, A1, A4,A5 in open brushless class which is the battle of ESC factories. For me, A4 is the best work I can do, and I'm very satisfied with the new FW 110211 for this race.Here I would like to share the final settings of my Xerun 120A V2.1.
Motor. Handout SP 11.5 v3 about 5 degree in the endbell.
FDR 6.9
Ddrs 9
Boost 40
Turbo 23
Turbo slope 18/0.1
Turbo delay 0.2
Boost start 4000rpm
Boost punch 300
After 5min race, motor temp lower than 80c.(35c air temp)
Nice!
Finally we took TQ, A1, A4,A5 in open brushless class which is the battle of ESC factories. For me, A4 is the best work I can do, and I'm very satisfied with the new FW 110211 for this race.Here I would like to share the final settings of my Xerun 120A V2.1.
Motor. Handout SP 11.5 v3 about 5 degree in the endbell.
FDR 6.9
Ddrs 9
Boost 40
Turbo 23
Turbo slope 18/0.1
Turbo delay 0.2
Boost start 4000rpm
Boost punch 300
After 5min race, motor temp lower than 80c.(35c air temp)
Nice!
#3423
Tech Champion
iTrader: (4)
If I'm correct, I think the A-final was three hobbywings, four Orca's, and three LRP's... not a tekin in sight!
Deffinate congrats to the Hobbywing team, Motor Wang's car looked very quick all week, and the new software seems to be doing the trick.
My ESC was rock solid in Mod, and fast too boot. Shame I had a nightmare otherwise! Although as Sizheng said to me as I left, almost everyone has a bad first TITC!
I've vowed to go back next year, with a new radio and more practise, and more time to see the city!
Deffinate congrats to the Hobbywing team, Motor Wang's car looked very quick all week, and the new software seems to be doing the trick.
My ESC was rock solid in Mod, and fast too boot. Shame I had a nightmare otherwise! Although as Sizheng said to me as I left, almost everyone has a bad first TITC!
I've vowed to go back next year, with a new radio and more practise, and more time to see the city!
Last edited by TryHard; 02-28-2011 at 07:52 PM.
#3424
Tech Fanatic
iTrader: (19)
hi guys
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
#3425
hi guys
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
All motors are different and there is no other better than another.
Tekin very revvy. Too high rpm will blow the armature
LRP RPM and Torque.
SP good all rounder an lower temps than LRP
FDR's also will be different. If you run a SP 21.5 for instances if the FDR is for a particular track 5.0 : 1 than the TEKIN will be closer to 5.6 : 1. Hence you will have to choose a motor and experiment......
Cheers
Ren
#3426
hi guys
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
#3427
Just back from TITC, happy time with many friends and hobbywing drivers , and ANgelo,you are a nice guy.
Finally we took TQ, A1, A4,A5 in open brushless class which is the battle of ESC factories. For me, A4 is the best work I can do, and I'm very satisfied with the new FW 110211 for this race.Here I would like to share the final settings of my Xerun 120A V2.1.
Motor. Handout SP 11.5 v3 about 5 degree in the endbell.
FDR 6.9
Ddrs 9
Boost 40
Turbo 23
Turbo slope 18/0.1
Turbo delay 0.2
Boost start 4000rpm
Boost punch 300
After 5min race, motor temp lower than 80c.(35c air temp)
Nice!
Finally we took TQ, A1, A4,A5 in open brushless class which is the battle of ESC factories. For me, A4 is the best work I can do, and I'm very satisfied with the new FW 110211 for this race.Here I would like to share the final settings of my Xerun 120A V2.1.
Motor. Handout SP 11.5 v3 about 5 degree in the endbell.
FDR 6.9
Ddrs 9
Boost 40
Turbo 23
Turbo slope 18/0.1
Turbo delay 0.2
Boost start 4000rpm
Boost punch 300
After 5min race, motor temp lower than 80c.(35c air temp)
Nice!
We are awaiting the release of the new FW
#3428
#3429
Hi Guys
I have just finished the Instructions for the latest release of software just waiting for michael to change the wording in the firmware and we are right .
I have changed the wording so everyone understands from around the globe .
example :Boost timing has changed to the actual real deal (Dynamic timing )meaning the internal timing of the esc .
Turbo timing has changed to (Turbo boost timing ) which is the additional timing added onto the dynamic timing .Boost relates to turbo in the real world .
ok ill post it up tomorrow.
regards Angelo
I have just finished the Instructions for the latest release of software just waiting for michael to change the wording in the firmware and we are right .
I have changed the wording so everyone understands from around the globe .
example :Boost timing has changed to the actual real deal (Dynamic timing )meaning the internal timing of the esc .
Turbo timing has changed to (Turbo boost timing ) which is the additional timing added onto the dynamic timing .Boost relates to turbo in the real world .
ok ill post it up tomorrow.
regards Angelo
#3430
I've put the 4 dot insert in, that brings the timing down by -10 deg. But still comes of hot.
DDRS =level 9
Boost timing =35 deg
Turbo open=12deg/ 0.1 sec
Turbo timing=15 deg
Boost start=6000 rpm
Turbo open delay=0.5 sec
Boost timing acc=350 rpm
Any help? Thanx rBakker. Here is my setting for the LRP x12 17.5.
Thanks
DDRS =level 9
Boost timing =35 deg
Turbo open=12deg/ 0.1 sec
Turbo timing=15 deg
Boost start=6000 rpm
Turbo open delay=0.5 sec
Boost timing acc=350 rpm
Any help? Thanx rBakker. Here is my setting for the LRP x12 17.5.
Thanks
#3431
Definition: a regular 'A' Finalist in the BRCA Nationals........ this was his first observation from the first competitive meeting with the HW equipment, he believed that the motor was being put under less 'strain' at lower boost start levels, we will update each time he files a race report with settings / track etc
#3432
#3433
Tech Addict
Definition: a regular 'A' Finalist in the BRCA Nationals........ this was his first observation from the first competitive meeting with the HW equipment, he believed that the motor was being put under less 'strain' at lower boost start levels, we will update each time he files a race report with settings / track etc
#3434
Tech Fanatic
iTrader: (11)
hi guys
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
quick question is ver3 224 the latest softwear upgrade or is there something newer.
I just went on onto the hobbywing site and down loaded it from there
my speed controller is xerun 120a v.1
and any tips for touring car 17.5 out door track med length avg lap 17 to 18 sec
also whats is the best motor to use with this speedy?
I have
sp v3 17.5
duo 2 17.5
duo3 17.5
balistic 17.5
redline 17.5
lrp x12 17.5
thanks in advance for your help
Steve
#3435