Capricorn LAB C801 1/8 scale
#421
My CAP is ready for the GLC.....I just hope I get some parts that ordered in time for qualifiers....Maybe I'll have better luck this time getting my stuff.....
#422
Tech Elite
Are trying to bully me into the race
It wont work, but I can enter my sedan in the masters class if they let me, that way I get more track time. Convenient how you old timers get more track time.
Look forward to hanging out this weekend and seeing everyone. Now I just need to get my stuff ready. Still sitting on my table not touched from the last race.
DJ Apolaro
#423
Tech Regular
iTrader: (1)
Wimp??????? hehehehe
Are trying to bully me into the race
It wont work, but I can enter my sedan in the masters class if they let me, that way I get more track time. Convenient how you old timers get more track time.
Look forward to hanging out this weekend and seeing everyone. Now I just need to get my stuff ready. Still sitting on my table not touched from the last race.
DJ Apolaro
Are trying to bully me into the race
It wont work, but I can enter my sedan in the masters class if they let me, that way I get more track time. Convenient how you old timers get more track time.
Look forward to hanging out this weekend and seeing everyone. Now I just need to get my stuff ready. Still sitting on my table not touched from the last race.
DJ Apolaro
Yeah Us "old" Guys need more track time for sure.
Have a safe trip!
#424
Tech Rookie
Hello, I have a C801 and I am very happy! But I break the rollover bar, I heard there is a new what is the reference? Or which brand fit?
Sorry for the translation with google, but i m french.
Thank you for your reply
Sorry for the translation with google, but i m french.
Thank you for your reply
#425
Tech Champion
iTrader: (3)
it is stronger and positioned better, it will keep your fingers away from the engine cooling head.
#426
Tech Elite
DJ
#427
Serpent Clutch on Lab C801
Hello, I was told that the complete serpent clutch set fitted with Capricorn clutch bell (the one that came with the car) works on the lab c801. Has anyone tried before? I have a number of spare serpent clutch that I would like to utilize.
#428
Tech Rookie
Thanks for your answers
#429
yes it works, i've used it before.
#430
After a week of racing in Ohio, I could say this car works great....I can't wait for the Nationals to run the car in Chaplin, CT.....
#431
useful information
Thanks
Thanks
#433
Tech Addict
1st Run
Hey all,
run the Lab 801 the first time with default setup and installed the full flex system front and rear.
Tyres i ran Contact 37 rear and 35 fronts
Problems
Clutch slipping as hell had to remove around 0.40 of shims from the back and i am still not happy any recommnendations? Spring tension is as manual says. Clutch looks like melted a bit yep found some red dust on the inside
I have no Off power steering, tried laying down the front shocks one more hole but its way to off.
2nd speed had some issues but it was mainly oil coming out of the bearings.
Acceleration looks a bit strange on this car, feels slower than my Evolva and off power the Evolva was way better. i know its setup but i thought it was going to feel quicker.
Your help would be greatly appreciated.
Thanks
run the Lab 801 the first time with default setup and installed the full flex system front and rear.
Tyres i ran Contact 37 rear and 35 fronts
Problems
Clutch slipping as hell had to remove around 0.40 of shims from the back and i am still not happy any recommnendations? Spring tension is as manual says. Clutch looks like melted a bit yep found some red dust on the inside
I have no Off power steering, tried laying down the front shocks one more hole but its way to off.
2nd speed had some issues but it was mainly oil coming out of the bearings.
Acceleration looks a bit strange on this car, feels slower than my Evolva and off power the Evolva was way better. i know its setup but i thought it was going to feel quicker.
Your help would be greatly appreciated.
Thanks
#434
Clutch
The earlier kits came with a super heavy spring the fits very snug in the cup in the clutch shoe. I ran this spring and had dusting until I installed 3/3 set screws in the flyweights then dusting stopped. The tension of the spring was flush with the clutch nut to start with a .6 gap
Capricorn now has a shorter spring less heavy that makes the car super smooth I run this spring with a .6-.7 gap starting at 1mm preload on the clutchnut ... Still with the screws in the flyweights
the stock gearing is funky. You may want to put a 19 pinion with stock spurs
as the 20 gives too numerically low of a gearing compaired to kyosho / mugen
Second gear ratios depend on track also.
As for set up dj set up is in this thread after page 13 somewhere.
Capricorn now has a shorter spring less heavy that makes the car super smooth I run this spring with a .6-.7 gap starting at 1mm preload on the clutchnut ... Still with the screws in the flyweights
the stock gearing is funky. You may want to put a 19 pinion with stock spurs
as the 20 gives too numerically low of a gearing compaired to kyosho / mugen
Second gear ratios depend on track also.
As for set up dj set up is in this thread after page 13 somewhere.
#435
Clutch
Get yourself the yello clutch shoe also