OCM KAOS DOMINATING
#1936
#1937
Tech Adept
my EVO and Redline 5 Port
#1938
Tech Adept
skeller UGPM
#1939
Tech Regular
Our base setup for the buggy. Good on-power and off-power handling, table on jumps etc. Note the +1.5mm HEX and droop is measured with ruler between the chassis plate and table:
http://www.fotopankki.fi/OCM/kuva/4341892852227681
http://www.fotopankki.fi/OCM/kuva/4341892852227681
#1940
last of the blanc evo set-uppages..
I calculated my toe insertcharts on the
stated A and B toeplates and their insertcharts
in the manual but
the kits have for a while now, 1.5 to 3 rear toe plates
instead of, 1.5° to 3.5 degrees...
so we have to discount 0.25° in former set-up pages
having 2.25° using 0 insert
in the rear toe-in insert table
I calculated my toe insertcharts on the
stated A and B toeplates and their insertcharts
in the manual but
the kits have for a while now, 1.5 to 3 rear toe plates
instead of, 1.5° to 3.5 degrees...
so we have to discount 0.25° in former set-up pages
having 2.25° using 0 insert
in the rear toe-in insert table
Last edited by speedy2; 09-01-2008 at 03:08 AM.
#1941
Tech Regular
#1942
Will the Caster truggy front upper arms work on the OCM truggy?
#1946
Tech Addict
iTrader: (16)
Anyone want a used EVO. It has lightened chassis, IRDC lightweight pillow balls, Kingheads engine mount, king heads wing buttons.
It needs a new steering link, it also needs shocks( i may have a few), and a couple pieces to fix the wing mount. It is in reasonably good shape.
80 Shipped
80 Shipped KMW Big Bore shocks set up for EVO, shocks retail for at least 130 new.
Will sell both for 150 shipped
[email protected]
It needs a new steering link, it also needs shocks( i may have a few), and a couple pieces to fix the wing mount. It is in reasonably good shape.
80 Shipped
80 Shipped KMW Big Bore shocks set up for EVO, shocks retail for at least 130 new.
Will sell both for 150 shipped
[email protected]
#1949
Yes poinas 2, I went from the .5 up anti squat in rear back the the 0 I had been running, helped a lot. Also the track was tacky, lots of traction at the ROAR region 4 championships, we had lots of rain the day before. Truck handled well, held up all weekend, didn't break anything, I'm gonna give the longer link a try if I run RC Pro series at wow this weekend.