NEW XRAY T2
#2626
Which bag is the last aid bag?
#2627
Tech Elite
iTrader: (11)
Originally Posted by beyondthepack
I was just wondering, lately the only thing that has broke on my T2 was the C-hub at the top, however every time its brakes, the CVD pops out and takes a chunk out of the outdrive and arm, now that it has done that, i have to bend the outdrive back, so the CVD will fit back in, upon doing so , (5-6 times) it finally broke (the outdrive) now in order for me to fix it i have to buy a new Tranny. Does this seem right, after all, to replace a outdrive on any other car would not be a problem, are you saying you have to buy a new tranny at $70 CDN, every time you brake or bend an outdrive? thats bull sh*t! other then that, I love the car, no I wasn't being sarcastic
I also believe the outdrives are available separately...
#2629
Tech Addict
iTrader: (1)
In, my case, the car was perfect exept for the toe... I put my fk05 rear hub and the car was now symetrical so my problem was the hub (about .75 deg off).
I started to shim it but didn't like the Idea, so I heated my left hub with a butane torch and twist it a little to get my 2 deg. Took me 2 min and the car is now top notch. Now I just need some powa!!!!!
I started to shim it but didn't like the Idea, so I heated my left hub with a butane torch and twist it a little to get my 2 deg. Took me 2 min and the car is now top notch. Now I just need some powa!!!!!
#2631
Tech Master
iTrader: (6)
Originally Posted by J@UNE
In, my case, the car was perfect exept for the toe... I put my fk05 rear hub and the car was now symetrical so my problem was the hub (about .75 deg off).
I started to shim it but didn't like the Idea, so I heated my left hub with a butane torch and twist it a little to get my 2 deg. Took me 2 min and the car is now top notch. Now I just need some powa!!!!!
I started to shim it but didn't like the Idea, so I heated my left hub with a butane torch and twist it a little to get my 2 deg. Took me 2 min and the car is now top notch. Now I just need some powa!!!!!
Oh yeah, if your looking for POWER!, go to TeamEAMotorsports.com and order up some horsepwer bro!
#2633
Are the ball joints on the T2 used on any other xray car?
#2634
Tech Master
Originally Posted by nmt6789
Are the ball joints on the T2 used on any other xray car?
#2635
This sounds lame but I broke one putting the kit together...
#2636
Originally Posted by ChrisP
...
I also believe the outdrives are available separately...
I also believe the outdrives are available separately...
#2637
Originally Posted by J@UNE
In, my case, the car was perfect exept for the toe... I put my fk05 rear hub and the car was now symetrical so my problem was the hub (about .75 deg off).
#2638
Good thinking of making these rear braces up so people can purchase them, easier then fiddling with making your own.
Did end up making some myself for the rear end, after reading a few have broken them on the rear.
So have to ask anyone break a front shock tower yet?