Car Breaker

iTrader: (10)

I tried with brand new screws, same thing happened

mutley001

iTrader: (1)

Grainger wins first leg of BRCA final round and comes 2nd to Elliott Harper in leg 2. All down to the final leg to decide the round and championship! Good luck Chris and go Schumacher!

OVA

iTrader: (86)

Than your graphite arm is bent..check the flatness..

mutley001

iTrader: (1)

Final leg is a win for Chris Grainger and the Mi5 which should be enough to give him the British Championships - well done Chris!

yokemad

Legend!

TryHard

iTrader: (4)

Check that the nub isn't running against the bulkhead, maybe just sand off a little material and the put a chamfer on the top of the nub to be sure.

Ed

haywood

iTrader: (49)

Does someone have a link or part# for the blades I would need to run?

TryHard

iTrader: (4)

No need, as the diff itself comes with the same sliders as used on the Schuey diffs, albeit in the grey plastic. The kit black ones fit straight on.

HiH
Ed

londonstylemi5

Anybody know a good setup running the lrp flow with the x20 10.5t and reedy sonic 13.5t in the mi5? Running carpet and tarmac

grippgoat

iTrader: (8)

If you buy the schui-packaged diff, it comes with slider inserts and rings. If you buy the spec-r packaged one for mi4, it doesn't come with the slider inserts or rings, and is a wee bit cheaper.

-Mike

TryHard

iTrader: (4)

I assume they both come with a spec-r header card then, as the one I picked up had sliders and all, with the spec-r header. Didn't realise there were two types.

Shock Tower

Tried to reassembly my geardiff yesterday to try to get it stop leaking. The o-rings were intact, and everything seems to be in the right order.

But it still leaks like crazy, any idears how to get it to stop, I have a race this weekend, and hoping to solve this before.

Any surgestion will be helpfull.

grippgoat

iTrader: (8)

There's this one, which is the Schumacher part number (but clearly looks to be packaged by Spec-R.. it's been a while since I bought one):
http://www.amainhobbies.com/product_...r-Differential

But there's also this one, which is actually quite a bit cheaper:
http://www.spec-r.com/default/index....roducts_id=209

-Mike

poop

iTrader: (27)

mine was like that too. ended up running an extra o-ring and it hasn't leaked since. just remember to check and change your shims accordingly.
hope this helps.

Car Breaker

iTrader: (10)

something bent or deform in the arm, a new one fix everything.