lowcel

iTrader: (80)

Anybody using a ZIPPY Flightmax 5000mAh 2S1P 30C hardcase pack battery pack in their cyclone s? I would like to make sure it will fit before I order three of them. I haven't received my cyclone yet so I can't take measurements.

The battery measures 137x45x23mm.

Also, anyone try a Turnigy 5000mAh 2S 30C Lipo Pack by any chance? It measurements a little longer. It measures 143 x 49 x 16mm.

billythekid

iTrader: (9)

Does anyone know if 416's driveshafts and axle could fit right into Cyclone TC? I found these DCJ for 416.

http://www.egrracing.com/shop/cv-uni...16-p-3368.html

joey

iTrader: (88)

hotbodies makes them already...

http://www.speedtechrc.com/store/ebp...id=475&id=8509

billythekid

iTrader: (9)

They are always out of stock.

jiggamacdaddy

i am considering getting a the cyclone but have some questions as the last time i raced the losi xxx-s was what i raced... does anything need to be done to run lipo packs and if so what packs can i run? what breaks and what spares to buy? Also if there is anything that is needed to get the car ready for rubber carpet racing let me know.

mickrcarver

iTrader: (101)

selling my brand new cyclone tc

http://www.rctech.net/forum/r-c-item...tc-extras.html

artwork

iTrader: (88)

IIC 13.5 Carpet setup...Car was very easy to drive and worked great. Wish I would have finished a little better, but sometimes that is how it goes. My Mod car was very close to this setup. If anyone wants It I can post the mod setup as well.

Scott B

iTrader: (47)

Some of the lower profile lipos fit no problem, like the TP 3200, SMC 4100, Orion 3800, 5200. As for the larger profile lipos you can mill or just dremal the bottom of the middle right bulkhead were it goes over the battery or you can get the new lipo topdeck with new middle right bulkhead...

http://www.hotbodiesonline.com/piw.p...=67695&lang=en

The Cyclone TC will work great out of the box for rubber carpet racing. As for spares I would get steering knuckles, castor blocks and I would suggest getting the original cyclone front arms to replace the TC arms as the TC arms are not a strong as the original ones plus I hear they give you more steering.

http://www.hotbodiesonline.com/piw.p...=73506&lang=en

charlie_b

iTrader: (1)

I noticed that ur only running a rear swaybar. Is this to prevent weight transfer on power during a turn so your chassis doesn't touch the carpet?

Team STPN

You must of heard that from Clint in the girls Bathroom

jiggamacdaddy

hahahah....hey i looked on speed tech for the big lipo coversion is there anywhere else they would have it also what springs should i get? Second are any of you going to the snowbirdnationals? I think ill be the only guy at nexus racing using the cyclone as i cant afford an xray hahah.

Scott B

iTrader: (47)

Here is the HB's spring set, has a pair of each type of sedan spring...

http://www.hotbodiesonline.com/piw.p...=75175&lang=en

And you can call Billy at Speedworld, last time I was there he had one of the lipo conversion's and he had the spring set's in stock too..

http://www.speedworldraceway.com/Con...tore_Hours.cfm

Syber Serulean

iTrader: (28)

Heres my setup sheet. i know...im a noob for forgetting some of the things im missing on the sheet...but its gives an idea you think?

http://download549.filefront.com/c0m...Setup+2009.pdf

k_bojar

iTrader: (30)

the link don't seem to work

Lazer Guy

iTrader: (1)

artwork............Yes I would like to see your mod setup please.
The set up I ended up with this year is very much the same as the one you posted, thanks for posting it.