Losi XXX-S
#7186
Tech Regular
Hello XXX-S drivers, my mate is gettin one of these cars, and he si wondering what hopups you guys recomend, aswell as, what spare parts are needed most frequently..
thanks in advance.
thanks in advance.
#7187
Tech Regular
hop ups
Carbonfibre3,
I would get the trinity bumper brace and the matt francis 2 pc. foam bumper. the stock bumper is weak and will break front shocks with goods hits.
I would get the trinity bumper brace and the matt francis 2 pc. foam bumper. the stock bumper is weak and will break front shocks with goods hits.
#7189
Carbon_Fibre3
From what I have seen Frt and rear hub carriers and frt and
rear arms are it for spare parts
From what I have seen Frt and rear hub carriers and frt and
rear arms are it for spare parts
#7190
R/C Tech Elite Member
iTrader: (47)
Well I just finished grinding down one side of the chassis, gonna go to the gym in a little while, but I'll try to finish the other side today as well, just want this project to be over with The one side came out pretty good, I am a perfectionist though, so I do wish I knew someone at a machine shop that could do it for me perfectly...
#7191
same here
i know what you mean, while "redesigning" my SS chassis, a cnc or something would be nice, dremeling and filing is just too much work . My next project is to outfit my pro 3 with a custom chassis. If only i had a digital camera.
#7192
Tech Apprentice
Aftermarket Spur gears
Hey does anyone know who if anybody makes aftermarket spur gears? someone was telling me theres an adapter that allows you to use Kimbrough gears.
#7193
Tech Apprentice
ops....i found it...
TMF1117 Gear Adapter Allows for use of aftermarket 48 BK a Matt Francis R/C- Losi XXX-S Gear Adapter. Allows for use of aftermarket 48 BK and 64 pitch gears.
Thanks anyway guys....
TMF1117 Gear Adapter Allows for use of aftermarket 48 BK a Matt Francis R/C- Losi XXX-S Gear Adapter. Allows for use of aftermarket 48 BK and 64 pitch gears.
Thanks anyway guys....
#7194
R/C Tech Elite Member
iTrader: (47)
Re: same here
Originally posted by pro3racer
i know what you mean, while "redesigning" my SS chassis, a cnc or something would be nice, dremeling and filing is just too much work . My next project is to outfit my pro 3 with a custom chassis. If only i had a digital camera.
i know what you mean, while "redesigning" my SS chassis, a cnc or something would be nice, dremeling and filing is just too much work . My next project is to outfit my pro 3 with a custom chassis. If only i had a digital camera.
#7195
Does anyone have some sort of pattern for cutting out the chassis? Please email me if you do or know where to get one.
#7196
another
i've again, found a mysterious problem with my car. When i hit the gas, my cars perfectly quiet, but when i turn and hold gas on, i hear a very distinct rubbing or grinding noise. it doesn't do it with the tires(tryed foam and rubber) off, but when i put them on it does, and i see a scape mark in the tires, but i don't see what would be scaping, i polished and cleaned my dogbones, and relubed them, it is my spool, i don't think so though.
help me please.
help me please.
#7197
Tech Regular
rubbing
it might be your hub axles not centered correctly or the set screw could be loose or stripped.
#7198
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Make sure you have the correct set screw that holds your hinge pin in place on your rear hub and castor block. If you used a droop screw for one of the set screws then it might rub on the rim. Other then that with wide front tires and depending on the upper shock location your tire could be rubbing on the shock and spring when the wheels are turned.
#7199
oops
i thought it might be that since my cars on a stand, there isn't any weight, so i took it outside, it ran quite, nice, but when i was making a lap in my driveway, i lost power, and my motor area started smoking! I broke a belt, and it all is now rock hard, waded up in my belt tensioner.
#7200
R/C Tech Elite Member
iTrader: (47)
Originally posted by wagonman72
Does anyone have some sort of pattern for cutting out the chassis? Please email me if you do or know where to get one.
Does anyone have some sort of pattern for cutting out the chassis? Please email me if you do or know where to get one.