Tamiya TRF415
I have some of those blue circular spacers left over from the build of my trf415msxx, can anyone tell me what they are for please?
I suspect they are to be placed over the hex's but im only guessing
I suspect they are to be placed over the hex's but im only guessing
which blue circular spacer?Big ones are for spacing the wheels, axle sized ones go between the bearings, and the small ones are for wheel base shims.
Tech Regular
iTrader: (17)
I have a ad in the wanted section. If anybody has an extra TRF415 MSX or MSXX car for sale, PM me or post the car in my ad in the wanted section please.
I also have a buddy who is looking for one also.
Thanks.
I also have a buddy who is looking for one also.
Thanks.
Yes those are the arms. There is also kit 54083 (about $60-70 on eBay) featuring the 416 uprights, axles, larger wheel bearings and other parts. This is supposed to be a conversion for the TA05, but it should work on any car. I can't comment on what blocks you need. Yes they would have ot be wider ones. You may also have to worry about your axle length with this kit.
They are short arms. Long arms have 'Y' braces and short arms have 'X' brances. Long rear arms also have little nubs for sway bar mounts. strange how they included everything but the rear knuckles?
new
i am buying a second hand 415 can any 1 tell me any setup help it will be raced in 540 class on a ashfelt surfece outdoor have been racing with a tt01 i know its a big difference
I race 27T rubber-tire on a small soda prepped parking lot track with a MSX MRE and have no issues with the standard MRE setup. I do use a front one-way, so that might take some getting used to. A lot of guys recommend the front spool but I've yet to try it. Keep in mind the MRE comes with a locked center shaft...
Of course I don't know how to mess with setup, so take it for what it's worth...
Of course I don't know how to mess with setup, so take it for what it's worth...
i'd start with either a box setup or:
yellow springs all the way around
yellow sway bars
35wt oil
2nd hole on shock support in fornt
3rd hole on shock support in rear.
4.5-5 droop in front, 5.5-6 droop in rear
5mm ride height
sorex 36r's or rp30's
that's where i would start.
yellow springs all the way around
yellow sway bars
35wt oil
2nd hole on shock support in fornt
3rd hole on shock support in rear.
4.5-5 droop in front, 5.5-6 droop in rear
5mm ride height
sorex 36r's or rp30's
that's where i would start.
Thanks guys will look a little further into it then
Rozzt_ina
your buying scottys car, get his setup sheet of him that he has used for tempe, he has it sorted as setup wise, very similar to what minimusprime has posted anyway
yellows all round, scotty has played with blues up front
he had ran the red sway at the rear, yellow at front
droop the same and ride height the same
one way front and centre
tyres, Tuesday nights 28's ,24's when it is in the middle of winter for 540, thats all we had been running, last Sunday i ran 36's thou as the track temp was pretty high
Rozzt_ina
your buying scottys car, get his setup sheet of him that he has used for tempe, he has it sorted as setup wise, very similar to what minimusprime has posted anyway
yellows all round, scotty has played with blues up front
he had ran the red sway at the rear, yellow at front
droop the same and ride height the same
one way front and centre
tyres, Tuesday nights 28's ,24's when it is in the middle of winter for 540, thats all we had been running, last Sunday i ran 36's thou as the track temp was pretty high
Hey guys, just bought a 415msx-mre online im super excited!!! hey chrisk, you mention tempe, you mean tempe AZ???
gday all i was pondering to whether i should spend the bucks to get a 416 or get the 2007 Marc R edition 415 what are your views cheers
jase
jase
whtltning00
Tempe, Sydney Australia
sorry mate along way from AZ
Tempe, Sydney Australia
sorry mate along way from AZ
416
Get the 416 I am
you might be tempted to get a 416 or new xray. but you're talking about at most .1 second per lap difference. so you're better off saving your money and focusing on your driving imo.
gl
many thanks for the replies i will continue to save