Team Losi JRXS Type-R
#7231
#7232
Tech Fanatic
iTrader: (7)
Join Date: Feb 2005
Location: Gatineau, QC, Canada (beside Ottawa)
Posts: 818
Trader Rating: 7 (89%+)
last night was my second night with a one way.
I was able to get a good setup and car was running fine.
HOWEVER, on one of the one way bearing, it was jamming all the time???? do it ever happen to you? should I contact losi? I'm pretty pist off about that. only 2 night of practice and bang...something wrong with my one way
I was able to get a good setup and car was running fine.
HOWEVER, on one of the one way bearing, it was jamming all the time???? do it ever happen to you? should I contact losi? I'm pretty pist off about that. only 2 night of practice and bang...something wrong with my one way
#7233
last night was my second night with a one way.
I was able to get a good setup and car was running fine.
HOWEVER, on one of the one way bearing, it was jamming all the time???? do it ever happen to you? should I contact losi? I'm pretty pist off about that. only 2 night of practice and bang...something wrong with my one way
I was able to get a good setup and car was running fine.
HOWEVER, on one of the one way bearing, it was jamming all the time???? do it ever happen to you? should I contact losi? I'm pretty pist off about that. only 2 night of practice and bang...something wrong with my one way
#7234
Tech Fanatic
iTrader: (7)
Join Date: Feb 2005
Location: Gatineau, QC, Canada (beside Ottawa)
Posts: 818
Trader Rating: 7 (89%+)
this is not normal expecially for 2 night of practice!!!!
I will contact them over the weekend.
#7235
I was contemplating calling them but honestly i don't even see myself usign the oneway, the spool works so well on most of my tracks although i am pissed that i have a useless device in my pitbox rumbling around.
#7241
hey anyone know why the prs64108 spur won't fit on my prs adapter the wholes are off
#7242
i run the airtronics 94758z servo(115oz/in at 0.06 transit), novak xbr speed control and the 17.5/13.5/10.5 novak motors. real dialed and fast as _____ with the maxamps 6000 lipo in it!
#7245
Tech Initiate
hay guys i am after some setup help i am currenty running the tim hamm low grip setup (uploaded below) the setup worked alot better than the current setup i was running but its still a little slipery on the rear i changed a few things with the below setup which did help a little
1) 30lb springs front (better)
2) removed rear sway (better)
3) rear shocks brought in 1 space (better steering)
Problem = still alittle lose at the rear (on power out fo courners) and limited steering but changing shock angle (rear) helped lots
sorry if i have not explained this very well still very new to setting up cars properly i am running RP30's (i can use diffrent ones) and racing on a small asplult track in the UK weather is not to warm and running 13.5t brushless spedd passion setup
if anyone can give me some pointers on some things to try next time i race to solve the issues i have as the car still feels very loose on power comming out of the courners and i really could do with a bit more steering. i have set the speed controler to its lowest punch setting
any tips/pointers greatly appericated
1) 30lb springs front (better)
2) removed rear sway (better)
3) rear shocks brought in 1 space (better steering)
Problem = still alittle lose at the rear (on power out fo courners) and limited steering but changing shock angle (rear) helped lots
sorry if i have not explained this very well still very new to setting up cars properly i am running RP30's (i can use diffrent ones) and racing on a small asplult track in the UK weather is not to warm and running 13.5t brushless spedd passion setup
if anyone can give me some pointers on some things to try next time i race to solve the issues i have as the car still feels very loose on power comming out of the courners and i really could do with a bit more steering. i have set the speed controler to its lowest punch setting
any tips/pointers greatly appericated