rocketron

iTrader: (16)

it was not discontinued for this reason and is the first time i have heard of this even being a potential problem.

Matt Howard

iTrader: (6)

Markf3x- The nats track in Omaha is my home track so I will definitly be there, look me up if you need any help while your here

Chris Furman

iTrader: (118)

I hear Losi is planning on a second run of these.. so hang in there!

Brian L

iTrader: (21)

Me, Schreff, and Larry will be at the Birds and I will also be at the Nats. We should be able to get you hooked up at the Nats if you need help.

I have been running between 2.5-3.5 for droop in my rubber car over ride height.

Yeti35

iTrader: (5)

I think Ron would know if they are going to make anymore since he works for them.

Sigearhead

iTrader: (74)

Does anyone sell a titanium screw kit for the Type R?

L.Fairtrace

iTrader: (24)

Lunsford sells them on their website but they are 109 bucks. Nice though.

morris

iTrader: (44)

2.5 in the front and 3.5 in the rear?

will this cause the car to not roll hard in the turns?

morris

iTrader: (44)

hey guys i bought a one-way a couple weeks ago and the little round things that have like a square looking thing in the center was missing.
i would like to sell it or somehow get the peices that were missing from the pack.
im sure it wouldnt be exspensive to purchase.
anyone intersted i will sell it for 45 shipped.

you all know how much they are new and its new just minus the peices.

lmk thru like pm or something.

matt

Brian L

iTrader: (21)

3.5 in the rear should make it smoother and have more grip.

I have also been running the back hole in the servo saver on my rubber car. It lets you run more EPA and makes the steering somoother. I tried it once in my foam car and did not like it. Put it back to the standard hole.

Yeti35

iTrader: (5)

If you bought it new and it is missing parts why not either take it back to the shop or email Todd and get replacements? Todd is pretty good about helping out with stuff like that.

jrr102486

iTrader: (8)

+1 on that. i have a xxx-4 that a xxx-s chassis was put in and not the 4. the xxx-4 chassis is 1/2" longer. talked to todd and he sent me a xxx-4 chassis free of charge!


i just got my jrxs r built and ran it once. man this car is sweet! gonna do xome practice with it this weekend for the ustcc race at trackside hobbies in brookfield wi. any parts that are a must to keep on hand or just the "norms" like arms and stuff?

also how many of you are running sway bars? front/rear/both/neither?

Ron Goetter

iTrader: (17)

if your running carpet use schreff's iic setup

http://www.losi.com/ProdInfo/Files/T...up_Schreff.pdf

markf3x

iTrader: (2)

WoooHooo!!!!

Got an email last night.. My aluminum c-hubs are done (both 4 and 6 degrees)and I should have them this weekend. I'll post pictures once I get in my hot little board bashing hands.

markf3x

L.Fairtrace

iTrader: (24)

Did you get them from Tamale? I emailed him 3 times now about getting some made and nothing happens?