Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#3031
Tech Master
iTrader: (77)
okay guys sorry for the delay. the set up is on petit rc setup
http://www.petitrc.com/setup/kyosho/...ne20121127.pdf
thanks to Arn0 for stepping up and getting it posted. thank you
http://www.petitrc.com/setup/kyosho/...ne20121127.pdf
thanks to Arn0 for stepping up and getting it posted. thank you
#3032
Tech Elite
iTrader: (14)
Middle hole no shims. By the way the front shock droop measurement should be 20.5mm. Sorry about that. I was trying so many things to get it to fit that when i filled the whole thing out again i was really burned out. I been super sick and beleive it or not just looking at a computer screen has been making me sick to my stomach and tired. Hope it works well for who ever tries it
#3033
Tech Elite
iTrader: (9)
Three rb6s made the A at our local toys for tots race today. 1st 2nd and 5th(me) all three of us are running completely different setups and all three seem to fit each of us better than our previous cars. Rb5s and b4.1s. Very pleased with my car. Also I tried the avid pistons today after the races and they felt very plush on the track. I ran the 4x1.3s with 37.5 front 32.5 rear and was very pleased. I also ran red front springs and yellow rears which was definitely a better choice for our track than the white/ red or gold I was previously running.
#3038
Tech Master
iTrader: (66)
the tranny gear mesh is tight. check for dirt or gunk in the gears. i would literally run a pick or the back side of an exacto inbetween every gear to make sure nothing is making the "tight" spot.
this has happened to me before and 100% it was because i had something in the gears.
this has happened to me before and 100% it was because i had something in the gears.
#3039
Tech Adept
Try loosening the screws that hold your transmission case together. Mine was alittle stiff in one spot and loosening the screws holding the transmission case together solved it.
Allen
Allen
#3041
Here is my RB6 ready for racing at Seaham / Jarrow club in the UK tonight.
Stunning paint by Andy Pearson.
Stunning paint by Andy Pearson.
#3043
Tech Regular
iTrader: (39)
http://www.amainhobbies.com/product_...-Spur-Gear-72T
http://www.amainhobbies.com/product_...-Spur-Gear-72T
http://www.amainhobbies.com/product_...-Spur-Gear-72T
#3045
Anyone got their Avid topshaft and slipper working. Those who ordered earlier this week should have them by now. Mine is still in the package and will be installed soon. Just wondering who got theirs done and got it running.