KARO

Uhhh...it would be an "engine" on the way...smart a$$. There were quite a few e-scale issues that people were experiencing...one guy had a motor problem, a couple others had speeder problems, and yet another had a battery problem...what's going on?

Todd23

I just got my new Associated B4.1 with the reedy 3300kv , and I was wondering . I have a Novak Havoc spec 13.5 . With the right gearing , would it be better than the stock reedy ? If so any pointers ? Going to use at the Altoona track , I just joined and looking for any help learning about the proper buggy spec's etc... Thank You !

TC3MIKE

Its all part of going fast. When you run hard you put equipment to the test. Thats part of racing and being competitive.

KARO

Just messing with OSR....

jlharing99

iTrader: (1)

But you have to admit...There's nothing like the smell of Nitro in the morning!!!

What day is racing this weekend?

robwike

iTrader: (7)

Sunday is race day. See everyone there.

T. Herwig

iTrader: (25)

Hello everyone. Is anyone planning on running 4x4 Mod SCT this weekend? (6/13/10) Just want to check before coming out, since it is a bit of a drive. I can get 2 Mod 4x4 SCT's together though. Thanks.

jmackani

iTrader: (14)

JD Blair normally has one. We can't make it this weekend, my son Cody runs one too.

OSR

I'll drop them off Sunday if you're going to be at the track.

NeverATiteLine

iTrader: (5)

Plan on it barring any disasters

Todd23

Question : I just got my Associated b4.1 and it comes with the reedy 3300kv brushless , I have a Novak Havoc Spec Brushless System 13.5T/3300kV . With the right gearing , would it be better than the reedy ? I'm new to the buggy class , and brushless systems !
Thank You , Todd

maddmaxx

Howdy guys, New member to the forums here, I currently live in state college, just starting to get into RC racing and looking for something a little more involving than just tooling my car around a field. Is the Altoona track 1/10 nitro friendly?, didn't see much on the website about it. I run a Losi ten-T truggy.


Cheers

maddmaxx

Howdy there, new to the forums here. Just starting to get into rc racing. I currently live in state college, so altoona is the best bet for me. My question is what are the non-race hours out there for members, and is the track 1/10 nitro friendly? I run a Losi ten-T. I would like to get used to racing on a track before joining any of the races, I'm looking at getting the family membership for me my wife and my son.

cheers

PADIRTLMJUNKIE

iTrader: (23)

Hello, members can practice anytime they want on non-race hours. Organized practice day is Thursday nights 6pm ish.

Yes the track is very 1/10 friendly.


Come check us out and ask any of us your ??????

TC3MIKE

50% chance of RAIN on Sunday.