G's rc; offroad in shippensburg pa
12-05-2010, 05:25 PM
#1891
any pics of indoor stuff yet? what motor you guys running for indoor buggy
12-06-2010, 03:54 PM
#1893
I'm running the same equipment as I did outside (Mamba 6900) with a smaller pinion, of course. It's waaay too much power to use at all on that tight of a layout, but it's still a ton of fun.
12-06-2010, 04:08 PM
#1894
lol, ill prolly roll with a 13.5
12-07-2010, 01:25 PM
#1895
pics? beeen can i get that xxcr set up?
12-07-2010, 02:34 PM
#1896
I get most of my setups from this site:
http://www.petitrc.com/setup/losi/Se...TripleXCR.html
They have at least one setup for just about every possible surface and condition. The one I'm using right now on the carpet is under the "Indoor" section, the setup marked "17.01.2009 Chris Brooke." The only differences between that setup and what's on my car is that I have 30wt. oil all around, 1/2 oz. of weight in the front, and 3 washers under the rear outside camber link.
http://www.petitrc.com/setup/losi/Se...TripleXCR.html
They have at least one setup for just about every possible surface and condition. The one I'm using right now on the carpet is under the "Indoor" section, the setup marked "17.01.2009 Chris Brooke." The only differences between that setup and what's on my car is that I have 30wt. oil all around, 1/2 oz. of weight in the front, and 3 washers under the rear outside camber link.
12-07-2010, 03:40 PM
#1897
anything planned for new years day? i think i wanna try and come up. try the offroad thing
