Team Br00d Racing Motors
#4336
habis...good job, congrats!
Reedy 19T ... F's, 767's or 4499's. If it's hot out or the motor is fading, try F's, otherwise use a more inexpensive brush.
Sorry Kevin, I had replied to you. The dyno sheets are marked corresponding to the motor/order involved and it is sitting on the motor build table at the shop. I will get the #'s off of it and post them for you, sorry about that...someone just forgot to include it when in a rush to get the motor out.
Reedy 19T ... F's, 767's or 4499's. If it's hot out or the motor is fading, try F's, otherwise use a more inexpensive brush.
Sorry Kevin, I had replied to you. The dyno sheets are marked corresponding to the motor/order involved and it is sitting on the motor build table at the shop. I will get the #'s off of it and post them for you, sorry about that...someone just forgot to include it when in a rush to get the motor out.
its the 19T reedy Challenger...........with the dimond shaped brushes....
thanks
#4337
Tech Regular
iTrader: (1)
Sorry Kevin, I had replied to you. The dyno sheets are marked corresponding to the motor/order involved and it is sitting on the motor build table at the shop. I will get the #'s off of it and post them for you, sorry about that...someone just forgot to include it when in a rush to get the motor out.
Cheers
Kevin
#4338
What 19T
Hi guys, what 19T motor do you reccomend for a fast reasonably open track with a touring car? I have used the KD in the past with good results, just wondering if there is something better.
Thanks.
Thanks.
#4339
R32GTR,
The KD19 is still the best choice. The new Reedy 19T is also good, but brushes are not available everywhere so you may have an issue buying them at your LHS.
Sorry I have not been responding to PM's, my "old" RC TECH account (Desolas) was banned from posting sometime last week because I made some negative (yet not inflammatory) remarks regarding ROAR in the Northwest Forums. I got sick of waiting for them to reactivate my account so I created a new one.
Careful what you say or they will have you too wasting 10 minutes creating a new RC TECH account..
The KD19 is still the best choice. The new Reedy 19T is also good, but brushes are not available everywhere so you may have an issue buying them at your LHS.
Sorry I have not been responding to PM's, my "old" RC TECH account (Desolas) was banned from posting sometime last week because I made some negative (yet not inflammatory) remarks regarding ROAR in the Northwest Forums. I got sick of waiting for them to reactivate my account so I created a new one.
Careful what you say or they will have you too wasting 10 minutes creating a new RC TECH account..
#4340
The new reedy stockstar is it any good?
#4342
Qualified 4th in second round of National RC using Team Br00d Reedy 19 Challenger and Team Br00d Energy 4600
winner was ETS winner Nielsen: http://ets.redrc.net/2008/04/nielsen...ock-qualifier/
THANK YOU TEAM BR00D
winner was ETS winner Nielsen: http://ets.redrc.net/2008/04/nielsen...ock-qualifier/
THANK YOU TEAM BR00D
#4343
where they differes is the motorbreak. The KD and Challenger is allmost equal, with the Challenger breaking a little more.
The Money breaks the less.
Dependent on your driving style, choose the motor that suits your driving style and track.
#4344
Tech Master
Order# 3792
I was hoping to use it by this weekend, but it doesn't seem so.
When can you send this out by? I emailed you guys but never got a reply...
I was hoping to use it by this weekend, but it doesn't seem so.
When can you send this out by? I emailed you guys but never got a reply...
#4345
I have recently send through some info via the contact us area on your website in regards to which 19 turn you feel would be the best one for on and off road and if there is a large difference between the KD19T blueprint or the older KD19T motor witht he more expensive xxx enduro brushes. What is the advantage in having the endure xxx brushes in the older KD19turn motors you are selling?
If you could reply to my e-mail address that was sent to you or alternatively here would be great, my local shop owner stocks brood motors and have been impressed with them, however in purchasing more i would like to know what other things i can do to these motors to make them better.
If you could assist with the first questions for now, i can research the rest :-)
If you could reply to my e-mail address that was sent to you or alternatively here would be great, my local shop owner stocks brood motors and have been impressed with them, however in purchasing more i would like to know what other things i can do to these motors to make them better.
If you could assist with the first questions for now, i can research the rest :-)
#4347
Tech Master
Over a week now and still no reply.
Did they go under?
Did they go under?
#4348
Tech Master
/sigh
still no reply.
Maybe they went on vacation. They can at least put that on thier website...
still no reply.
Maybe they went on vacation. They can at least put that on thier website...
#4349
If you placed an order within the last 2 weeks you will see it soon. I was at the shop today and everything was being prepped to ship out.
Emails have been difficult as of late as everyone has been getting 800-1000 spam emails per day. It's hard to find the customer emails from the junk, even with filters.
That being said...
Dear Customers,
As of today 6/9/08 I am no longer working for Team Brood. If you need assistance with orders, email [email protected] or [email protected], you can also PM EddieO or flameoutgarrett here on RC TECH. I can be of no assistance.
Thanks to everyone for their support and business over the last year and a half. I have enjoyed working with and helping many of you.
Please do not take this as anything negative for Brood. It was just time for me to move on. I need to take a break from racing and focus on other parts of the hobby.
--Wes
....now you can start working, Garrett.
Emails have been difficult as of late as everyone has been getting 800-1000 spam emails per day. It's hard to find the customer emails from the junk, even with filters.
That being said...
Dear Customers,
As of today 6/9/08 I am no longer working for Team Brood. If you need assistance with orders, email [email protected] or [email protected], you can also PM EddieO or flameoutgarrett here on RC TECH. I can be of no assistance.
Thanks to everyone for their support and business over the last year and a half. I have enjoyed working with and helping many of you.
Please do not take this as anything negative for Brood. It was just time for me to move on. I need to take a break from racing and focus on other parts of the hobby.
--Wes
....now you can start working, Garrett.
#4350
Tech Regular
iTrader: (1)
Garrett or Eddie,
Please see post 4335.
The order was 3748
I have still not received and figures for my peeler.
I have sent 2 emails via your website in addition to the posts here.
Please advise if you are able to provide me with any information on the motor in question
Kevin
Please see post 4335.
The order was 3748
I have still not received and figures for my peeler.
I have sent 2 emails via your website in addition to the posts here.
Please advise if you are able to provide me with any information on the motor in question
Kevin