BMI Racing Discussions
#7891
Tech Champion
iTrader: (31)
Originally Posted by protc3
hey guys,
i should have the prototype motor mount finished tommorow.it is looking really cool.it is pretty difficult to make as of now being that im making it fit in place of the cam but i gotta tell you,it looks sick when its cut.as of right now the whole mount is already half the weight of the stock mount.by the time it goes into production it should be under or at the half ounce mark.the stock motor mount cam set up weighed in at 1.161 oz.
i should have the prototype motor mount finished tommorow.it is looking really cool.it is pretty difficult to make as of now being that im making it fit in place of the cam but i gotta tell you,it looks sick when its cut.as of right now the whole mount is already half the weight of the stock mount.by the time it goes into production it should be under or at the half ounce mark.the stock motor mount cam set up weighed in at 1.161 oz.
-Dave
#7892
For the FK05 kit, On the upper deck, the top motor mount screw position, should that be countersunk. the one I have is not and I am just wondering or did you want people to use button heads so there is still some material around that area. OTherwise the chassis is a work of art.
#7895
Tech Elite
iTrader: (1)
Originally Posted by protc3
hey guys,
i should have the prototype motor mount finished tommorow.it is looking really cool.it is pretty difficult to make as of now being that im making it fit in place of the cam but i gotta tell you,it looks sick when its cut.as of right now the whole mount is already half the weight of the stock mount.by the time it goes into production it should be under or at the half ounce mark.the stock motor mount cam set up weighed in at 1.161 oz.
i should have the prototype motor mount finished tommorow.it is looking really cool.it is pretty difficult to make as of now being that im making it fit in place of the cam but i gotta tell you,it looks sick when its cut.as of right now the whole mount is already half the weight of the stock mount.by the time it goes into production it should be under or at the half ounce mark.the stock motor mount cam set up weighed in at 1.161 oz.
#7896
Originally Posted by chach
For the FK05 kit, On the upper deck, the top motor mount screw position, should that be countersunk. the one I have is not and I am just wondering or did you want people to use button heads so there is still some material around that area. OTherwise the chassis is a work of art.
#7897
hey guys,
i finished the prototype TC4 motormount. it came out extremely well and the look and function is exactly what i was lloking for but the cost exceeded what i was hoping for. That being said,im a little uncertain if it would sell being that the cost will be on the high side. If i was to release the motor mount it is going to have a price tag of about $50.00. My question is would this mount be worth buying? I am looking to see what you,the consumer want. All input would be greatly appreciated.
thanks,
jason
i finished the prototype TC4 motormount. it came out extremely well and the look and function is exactly what i was lloking for but the cost exceeded what i was hoping for. That being said,im a little uncertain if it would sell being that the cost will be on the high side. If i was to release the motor mount it is going to have a price tag of about $50.00. My question is would this mount be worth buying? I am looking to see what you,the consumer want. All input would be greatly appreciated.
thanks,
jason
#7901
Tech Regular
Originally Posted by wyd
Damn!!!!!!!! That sucks. My wife brings my supper to me in my hobby room while I workon my stuff. Some days I'm in their 3 to5 hours a night when I get home from work. She don't say nothing because her hobby takes a good amount of time but nothing like racing. I will have more time when I start flying my heli's more and racing less and less. I might quit racing all together if Express wasn't such a great team to race for.
In fact she's remarkably supportive of my racing. Even when I came close to killing myself in a kart, she never said a word about me quitting. She doesn't bitch (much) about the money, or my time at the track, or beer with the guys afterwards.
A great lady to be sure.
#7902
Hey Jason why not make it a two piece? Motor mount and shaft support.
I think that would leave a little room for shimming the shaft support to get the proper gear mesh in the case.
I think that would leave a little room for shimming the shaft support to get the proper gear mesh in the case.
#7903
Tech Regular
wow, mine bitch's every chance she gets, time into it, money into it, you name it... but she truelly is an awsome lady, wouldnt trade her for the world, she knows if there was ever a real choice to be made this hobby or her the cars would have to go, the fact that shes extremly hot helps as well!!!