BMI Racing Discussions
#5537
Hey everyone Art sent me some pics of the new version of the B-Mi-2 to post for ya all. It looks like the batts are back about a half a cell from the first one. Art can fill us in on the changes. The original prototype has been working well testing on the carpet. Ill let ya all know what I think in a week or so after I get to run it a few times.
#5538
another pic.
#5541
I would just like to say great job on the TC3 chassis. My local indoor track opened just this last sunday and i finally got a chance to try it out and am happy to say it handled and performed great
#5542
Tech Apprentice
BMI xray carpet setup
Can someone point me to a BMI xray fk carpet setup. I know I saw it some where on this forum.
Thanks
Joe
Thanks
Joe
#5543
Tech Master
Which chassis are you running? If you have the split chassis, go to www.cefx.net and go to the setups and use Josh's Carpet Nats setup. The car will be on rails with that.
#5544
Tech Addict
Originally posted by rayhuang
I am all set for the Champs with my BMI Xray amd BMI chassid L4!!! Cars are literally soldered up and ready to hit the track. I cannot wait till my first practice session!!
Ray
I am all set for the Champs with my BMI Xray amd BMI chassid L4!!! Cars are literally soldered up and ready to hit the track. I cannot wait till my first practice session!!
Ray
I am jealous.... wish I lived closer.
Good luck and will see ya at the Novak race.
#5545
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
protc3
Don`t forget about me???
Don`t forget about me???
#5546
Tech Apprentice
To BMI
Dear Sirs,
I refer to the various pics you have posted here. I would be more than pleased if you could kindly advice as to the followings:
1. When will be the 1/12 bottom plate be available?
2. Can i use everthing else original to my L3 on the plate?
3. Where can i order it online? Do you ship non-US?
I thank you for your kind attention and look forward from hearing from you at your earliest convenience.
Yours Faithfully,
Mr. Bored
Dear Sirs,
I refer to the various pics you have posted here. I would be more than pleased if you could kindly advice as to the followings:
1. When will be the 1/12 bottom plate be available?
2. Can i use everthing else original to my L3 on the plate?
3. Where can i order it online? Do you ship non-US?
I thank you for your kind attention and look forward from hearing from you at your earliest convenience.
Yours Faithfully,
Mr. Bored
#5547
Tech Apprentice
BMI 350 chassie
I am running BMI 350 chassie. I looked back thru out the thread and there was only one setup posting for the BMI fk xray. Lots of TC3 setups. I will check out cefx.net
It would be good to see more xray setup postings to compare.
Thanks !
Joe
It would be good to see more xray setup postings to compare.
Thanks !
Joe
#5548
Tech Master
iTrader: (3)
Originally posted by Speedie
Hey everyone Art sent me some pics of the new version of the B-Mi-2 to post for ya all. It looks like the batts are back about a half a cell from the first one. Art can fill us in on the changes. The original prototype has been working well testing on the carpet. Ill let ya all know what I think in a week or so after I get to run it a few times.
Hey everyone Art sent me some pics of the new version of the B-Mi-2 to post for ya all. It looks like the batts are back about a half a cell from the first one. Art can fill us in on the changes. The original prototype has been working well testing on the carpet. Ill let ya all know what I think in a week or so after I get to run it a few times.
Thanks Terry. The chassis has the batts moved back from the origional proto. They are just a hair forward from what would be center of the stock chassis and in a few mm from the inward most setting on the stock chassis. I am going to test this car Friday night. I am sure it is going to be awesome. The first proto was really good, just not suited for asphault with the batts that far frward. I did run a personnal best with it though!!