tappz

What diff configuration would be good for rally on concrete surface...say also road/ashpalt, perhaps some dirt/pebble surface on occasion...

Rear = locked / semi-locked / ball diff ...or ?
front = locked / semi-locked / ball diff /one way ..or ?

Suggestions please!


This is my TT-01 Rally spec so far...

60mm Allot dampers
9T Brushless motor/heatsink
Lipo 4000 25C
Alloy shaft kit
Alloy steering kit
Ball Bearings
Rally block tyres

thanks!

SamHill

iTrader: (4)

I run a ball diff in rear and a front one way.

qks57™

iTrader: (23)

i used to run semi-locked when i had it. loved it that way.

zaraz

iTrader: (38)

hi does anymake rally light buckets for 1/10 scale rally, like the ones in front of the tamiya lancia 037, i have searched for the parts but they are sold out any help thanks

MichiK4

Do anybody know a store where i can buy parts for my Losi xxxs? Like the shocks A5091?

MichiK4

Nobody?

sunktothenutz

Converted ansmann are-2...great rally car

AJJ011109

iTrader: (6)

Hey i have a HPI sprint 2 drift, should i change to rally tires and try to rally, if i do, anything i should do before i run?? please help

CosworthDriver

Great looking car!
Could you please post some more pics of the chassis etc.? I'm planning to base a rally car on the ARE-2 also, so could use all the inspiration I can get.
Is that the standard shocks with longer ball studs?
I'm considering using shocks and shock towers from the Master Smacker.

Cheers

BIGPP

hi,
I just wanted to know what is the best rc 1/10th car for rally.
i want to put lipo batteries and be able to upgrade it.
this would be my 1st ever rc car .
please help

qks57™

iTrader: (23)

tamiya's TL-01 or TT-01 are good choices. TT-01 will need some minor mods, while TL-01 is pretty much ready for rally. always good to have 55-60mm shocks on, and some rally block tires. semi-lock your diffs too.

SnoopMaxx

Converted Ansmann are-2...great rally car

BIGPP

thank you very much

BIGPP

thank you

sunktothenutz

Hi,
All you neeed are longer ball studs for the shocks,dont worry about shock towers,..cut away the chassis so that the arms drop down more,gives you about 30mm ground clearance,which is more than enough....

cheers simon