lastsun

Xray 1/10 onroad NT1 08 selling for $500.
price include
- 2 used bodyshell
- Xray lightweight 2 speed shaft
- Xray lightweight 2 speed housing set
- Xray lightweight brake disk adapter
- Xray multi-flex 1 piece engine mount set (new in bag)
- Xray multi diff one-way set
- Xceed lightweight brake disk
- Xray lightweight mid-shaft
- 1600mh receiver pack

-add $200 for a used SM BOSS engine + pipe


Interested contact @ 96889226
__________________

roychan69

iTrader: (7)

Jammin/HongNor X2 CRT Pro Truggy
* Only Ran It For Race, No Bash With It, Nice And Good Condition
* No Servos, Engine and Pipe..











Complete With Hop-Ups/Option Parts:
CNC Front C-Hubs
CNC Rear Up-Rights
CNC Steering Drag Plate (Original is Stamped Aluminum)
CNC Front Bulk Head Top Plate (Original is Graphite)
CNC Front Curved Brace (Original is Plastic)
CNC Rear Curved Brace (Original is Plastic)
Aluminum Wing Post (Original is Plastic)
Aluminum Servo Tray Post (Original is Plastic)

Others:
Big Bore Shocks (New Pistons, Shafts, O-Rings)
New Rear Crown Gear (Properly Meshed)
New Front and Rear Upper and Lower Arms
New High Down-Force Wing (White)
New Stone/Sand Guard (Sides)
New Skid Plates (Rear)
New Air Filters
New Fuel Tank
New Set of Wheel Nuts
PROLINE 'SHIFT' Body
HongNor 'X' Tires LPR (9/10)
Original Parts That Came With The Kit

Selling At S$ 550.00
Interested Parties Please Message Me At +65 9889 6887 Roy
No Low Ballers Please..

Bugs Bunny

iTrader: (5)

Stuff for Sale

a few pack of enriched power stick pack batteries for sale.
2 x 4000mah stick pack with deans plug $30 each (2 races old)
2 x 4600mah stick pack with deans plug @ $50 each (less then 5 runs )
1 x 4600mah stick pack with deans plug @ $40. (4 races old)
3 x 4600mah side by side @$30.00 each (4 races old)

Chrono RS03 long wheel base buggy for sale. Car only run in one race. In good condition. Selling it off urgently due to some personal matters. Quote me a price for this buggy if u are interested. Will throw in a used Falcon engine for it. Will sell it off if e price is reasonable.

Selling 1 brand new sanwa M11X tx n rx. 2.4ghz. $570 (Reserved)

Selling a sanwa tx box for M11. Mint condition. $110.

1 NIP Tamiya DB-01 blue alu motor mount. Selling $80.00. (Retail price about 100+)

1 used Tamiya M03R for sale. Kit come with lots of option parts. Addition blue m03 chassis, 3 racing 3deg toe in rear hub, front roll bar, special down stop parts for m03, ball diff. Selling everything for $230.00 (Total price for this car cost more then $400.)

1 mint condition Tamiya TB03 for sale. Car comes with lots of option parts including centre shaft, spool, carbon chassis(only used for 1 race), full U-J, alu diff cup, alu servo holder, titanium n alu turnbuckle, carbon parts, alu steering set n some spare for this car. Will throw in my used Arta Garaiya shell. No manual n box. Selling everything for $400.00. (whole car plus option cost me more then $700.)

1 NIB MuchMore 2500mah 11.1v lipo batt for KO transmitter. Selling at $120.00

1 NIB HPI E10 RTR car kit. Come with Nissan Skyline R32 shell, wall charger n 1500mah batt. Selling at $200. Will not sell separately. (Retail price at LHS around $290)

1 good condition Alex racing lap counter for sale. Hardly use, carbon printing cover. Selling at $250.00 (Retail price at LHS around $300)

Good condition Muchmore MR edition CTX-Discharger for sale. Condition 9/10 Selling at $150.00 (Retail price at LHS around $300)

1 mint condition Muchmore battery holder for sub c cell with fan. Condition 7/10. Selling for $70. (Retail price at LHS around $110)


Interested pls contact Tony at 97517372. Can view n deal at any places except local hobby shop n EP track at Yishun

(Low ballers will not be entertain)

wll1234

iTrader: (1)

ups~ price reduce to $45
less than half price ady~~
welcome anyone wiiling to trade or selling ur .12 class turbo engine and manifold,pipe set or sanwa,futaba radio system(note: the receiver must micro size below 1.0 x 1.5 x 0.6 in or same dimension as futaba r153F)like futaba 2pl
note 2: the engine and radio system must in good condition
tks

wll1234

iTrader: (1)

WTB > Ball Bearing

--------------------------------------------------------------------------------

im finding a Bearing Stainless:ABEC-3 ( 9 ball bearing )
Ball Bearing size: outer 21 mm
inner 11mm
thickness 5mm

anyone willing to sale or kno where can buy it
jus pm me the best price & detail
tks~

l1ght

iTrader: (1)

1)nip nosram Xtreme modified 12x2 brush motor bought at taising for $80 (offer)




sms me at 81123301 if interested

jaggered

iTrader: (1)

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Got the above for sale.

Come with original Tamiya hop up parts...
1 set TRF Buggy shock
Front one way
Front & Rear U-shaft
F & R Alum suspension mount
F & R Alum Suspension Block
Carbon reinforced parts
TRF501x F & R Stabilizer
Alu steering block
Alu motor heat sink
Slipper Clutch
Baldre body shell


Brand new extra set of Rims and tyres,so total two sets given


Condition = 10/10

Car is brand new,only ran once to test after assembly,never off road b4.

This is my second DB01 so explains the under utilisation.

NO electronics

Selling = S$280(Firm)

ONly serious buyer contact 98733108

gowin

iTrader: (1)

Hi,

I am selling my Tamiya DF03 Buggy.
Only run twice in Multi storey carpark.
This buggy comes with hopup turn knucker all round(no motor,no electronics).

Pls view pictures for detail.


Selling @ $230 inclusive of box and manual.

Pm or sms @97808210 to deal at Admirity Mrt Station.

colin470

iTrader: (11)

Have an excellent condition 1/10 Ultimate HUDY Setup kit for sale
All you need to set up ure 1/10
Condition 9/10
Rarely used

$350 firm sms 91717681 to deal

gowin

iTrader: (1)

Hi all,

I have the following for sale.

New Tamiya LED Light Unit TLU-01 selling @$50.
New Tamiya LED Light Control Unit TLU-02 selling @$90.


New 1/10 Hpi Sagaris Bodyshell (Metallic blue colour) selling @$40.

New Tamiya Silvia Coppermix (gold colour) selling @$50.
Light bucket is included.

New Tamiya Ferrari FXX selling @$60.

All the bodyshells are shown in the pictures.

New Tamiya stock esc @35
New silvercan motor @$15

Used silvercan motor @$10
Used Futaba 3003 servo @$20.
Used Tamiya stock servo @$15.

All prices listed are not discountable.
Pm or Sms @ 97808210 and meet at Admirity Mrt for deal.

ez_racer

iTrader: (3)

Pre-Launch Singapore Brand "INNOVA RACING" is introducing their Professional RC Electric Powered Touring Car XTR-09
(can be used for drifting too)

ALUMINIUM Chassis! Tested and Track Proven!

Same standard like HPI, Tamiya & Kyosho!

Cheap Price doesn't mean cheap quality!

Currently having pre-launch sale!

INTRODUCTION PRICE: S$298 Per Set (For Ready To Run Set)
INTRODUCTION PRICE: S$198 Per Set (For KIT Set Only - No Motor, ESC, Battery, Radio System & Servo)

To Order / Purchase please SMS to: 9894-4396 [SMS Only]

COD at these MRT Stations: Admiralty, Woodlands, Kovan (Certain days) and Hougang (Certain days)

Delivery to your doorstep: S$10




A quick glance of the specs:
- Aluminium Chassis (2mm)
- Differential Front & Rear Gear Boxes
- 4 Wheel Drive Aluminium Shaft Driven (True 4WD)
- High Power iNNOVA 320A Reversible ESC.
- High quality touring car tires.
- High quality compound rubber (with foam inside) tires for controllable driving with realistic looks and aggressive tread pattern.
- Foam bumper protects the car from potentially damaging impacts.
- Adjustable rear body posts allow you to mount a variety of different bodies without trimming or replacing the posts.
- Fine tune your suspension with adjustable turnbuckles.
- Complete set of ball bearings for a smooth and efficient drive train.
- Oil-filled coil-over shock absorbers with specially chosen springs for all purpose racing.
- Durable and rigidly constructed aluminium main chassis.
- Front and rear shock towers with optimized shock absorber and camber link positions for ideal suspension geometry.
- Droop screws allow you to "race tune" your suspension settings.
- Precise bellcrank steering.
- Professional Digital Proportional 3-Channels LCD Radio Control Transmitter & Receiver.

Spare parts can be purchased from the company (INNOVA RACING) directly at Singapore.

For more details and pictures please check out on this official website=>
awextremeinnova.t35.com/car.htm

mjamesf

iTrader: (4)

Helping my brother to sell his RC stuffs:

1) Team Magic G4JR w/ stock engine - $250
-comes with stock engine & pipe
-Hopped up
-3 months old only (Condition 9/10)
-new UFO 2 push type clutch (1 month old only bought at $150)
-one-piece engine mount
-2 servos
-Team Magic Bodyshell (Stratus)
-Some spareparts
-Receiver Battery pack
-Manual & Box
-All you need is tx & rx

2) Boss Engine (SM Boss-B12-TC) - $250 Negotiable
-2 months old only (Condition 9/10)
-comes with pipe & box

SMS 96436012

auggy79

iTrader: (2)

Would like to sell off Tamiya F104 c/w Tamiya Super Stock RZ motor.
Car has been built up recently and has been ran at Turf City and Bk track once each only.
Looking to let go at $250 bucks. Top up $50 for a Intellect Lipo 4000mah 25c+ which has been balanced charge 3 times before only.
SMS 96341551 for more information or to deal.

weejiayin

Hi! I have a TT01 chassis for sale.
It's a full set, but you might have to get a new shell cause mine's not well sprayed. Haha.

View the images. Everything in the pictures is included.
Comes in original box with manuals.

Condition: 9/10 (Rarely used.)
Reason for selling: Change of hobby
Asking Price: $330 (Negotiable!)

Please email [email protected] or text 97887902 for enquiries, viewing or to deal. =)

sdd6131

iTrader: (9)

Selling LRP SPHERE Competition TC-Spec brushless esc, condition like new, extra spare fan, Selling at S$230 (neg), interested sms 96860086