R/C Stuff Selling
#3976
Tech Initiate
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Giving up hobby sale:
1) Xray T1 with the following items -
- alu shocks
- alu eccentric front upper arm holders
- alu rear roll centre bridge
- front alu adjustable blade roll bar
- alu rear lower shock mount
- 303310 rear hub carriers x 2 (NIB)
- 303110 rear lower arms x 2 (NIB)
- 302210 front right steering hub x 1 (NIB)
- 302220 front left steering hub x 1 (NIB)
- 302110 front lower arms x 4 (NIB)
- front alu wheel wheel hexes x 2
selling $230 neg.
2) Tamiya F103 rolling chassis (no bodyshell) with the following items -
- tamiya carbon lower chassis (minimal scratches)
- soft t-bar
- tamiya purple alu ride height adjustable heatsink motor mount
- ride height adjustable gear box
- optional upper deck
- steering turnbuckles
- front link type suspension arms
- glassfibre rear shaft
- flex t-bar
- few sets of mounted tires
selling $150 neg
3) Tamiya F201 Ferrari standard car kit, assembled for display purposes only, never run before. selling $180 neg.
only interested buyers pls PM to arrange viewing of cars. thanks.
1) Xray T1 with the following items -
- alu shocks
- alu eccentric front upper arm holders
- alu rear roll centre bridge
- front alu adjustable blade roll bar
- alu rear lower shock mount
- 303310 rear hub carriers x 2 (NIB)
- 303110 rear lower arms x 2 (NIB)
- 302210 front right steering hub x 1 (NIB)
- 302220 front left steering hub x 1 (NIB)
- 302110 front lower arms x 4 (NIB)
- front alu wheel wheel hexes x 2
selling $230 neg.
2) Tamiya F103 rolling chassis (no bodyshell) with the following items -
- tamiya carbon lower chassis (minimal scratches)
- soft t-bar
- tamiya purple alu ride height adjustable heatsink motor mount
- ride height adjustable gear box
- optional upper deck
- steering turnbuckles
- front link type suspension arms
- glassfibre rear shaft
- flex t-bar
- few sets of mounted tires
selling $150 neg
3) Tamiya F201 Ferrari standard car kit, assembled for display purposes only, never run before. selling $180 neg.
only interested buyers pls PM to arrange viewing of cars. thanks.
Last edited by v1rrgt; 06-17-2003 at 12:29 AM.
![v1rrgt is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3977
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
1) Sanwa 102 Servo(New)
= S$15/pc (Left 10 to go)
2) OS V01B Buggy engine(USED)
= S$150
3) Kyosho Super 8 with Hyper pull start engine + pipe + minifold.
= S$480 (With SUBARU WRX cover)
4) Futaba 3PJ with RX and Crystal
= S$200 (Freq =75mhz)
5) 1/8 Mugen Sting with NOVA 9port Turbo engine+pipe+minifold with NEW 2 set of ARROW tyres.
(Giving away another 1/2 car kit as spare parts with chassis)
= S$370
6) Collari CCT NEW kit(Build but never run B4)
= S$180
7) Buggy spike tyres = S$25/set (4pcs all new no rim & insert)
8) Vector NT with New body shell
= S$350 (Car kit only without Centax clutch)
9) NTC 3 with plenty of spare parts with 3 Port Turbo engine +
2 pipes.
= S$588
10) Kyosho Kanai II with option & spares + OS .21 V01B(New piston sleeve + pipe + Minifold + 6V 1100mah batt pack + 2 Hi torque servo
= S$1100(Firm)
11) 1/10 Impulse with option & many spares + starter box.
= S$500
ONLY serious buyer contact for viewing = 96177217
Exchange or Trade in are also welcome subjected to selective car model only.
= S$15/pc (Left 10 to go)
2) OS V01B Buggy engine(USED)
= S$150
3) Kyosho Super 8 with Hyper pull start engine + pipe + minifold.
= S$480 (With SUBARU WRX cover)
4) Futaba 3PJ with RX and Crystal
= S$200 (Freq =75mhz)
5) 1/8 Mugen Sting with NOVA 9port Turbo engine+pipe+minifold with NEW 2 set of ARROW tyres.
(Giving away another 1/2 car kit as spare parts with chassis)
= S$370
6) Collari CCT NEW kit(Build but never run B4)
= S$180
7) Buggy spike tyres = S$25/set (4pcs all new no rim & insert)
8) Vector NT with New body shell
= S$350 (Car kit only without Centax clutch)
9) NTC 3 with plenty of spare parts with 3 Port Turbo engine +
2 pipes.
= S$588
10) Kyosho Kanai II with option & spares + OS .21 V01B(New piston sleeve + pipe + Minifold + 6V 1100mah batt pack + 2 Hi torque servo
= S$1100(Firm)
11) 1/10 Impulse with option & many spares + starter box.
= S$500
ONLY serious buyer contact for viewing = 96177217
Exchange or Trade in are also welcome subjected to selective car model only.
![Eric Cheng is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3978
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Super Ten 80% full alloy for sale without electronics & engine.
alloy chassis
alloy upper deck
alloy front arms
alloy rear arms
many many more selling at $100 neg.
Good for those playing Super 10 can buy for spare parts. sold
OS CVR 12 size engine with pipe, Manifold & Casket
Good Compression selling only $100 Fixed.
15 size force pull start engine run in only selling $50 Fixed
75mzh Futaba controller 3PDF with 2 servo & mini Receiver
still very new selling $ 180neg. sold
Hobao hyper ten with 12 OS CVR engine run only 15 tank of nitro
bought for 2 mths upgrade alloy upper deck, alloy gear box plate front & back with some spare parts. No electronic. Selling $399
neg With electronic & 3PDF control $ 550 neg very good condition
GS Vision pro with 12 size Nova 3 port turbo engine. With 1100 receiver battery pack 3PDF controller , mini receiver, Sterring Sanwa ZR servo, Throtle Sanwa 112 servo & Ko po pro fail safe.
Run only 4 tanks of nitro. Very Very good condition. Will throw in charger for receiver battery pack. Selling $1100 neg. With lots of spare parts. If really interested can adjust the price.
V1S with 12CVR engine with some spares & hop up selling $180
Interseted please call 9455 8297
alloy chassis
alloy upper deck
alloy front arms
alloy rear arms
many many more selling at $100 neg.
Good for those playing Super 10 can buy for spare parts. sold
OS CVR 12 size engine with pipe, Manifold & Casket
Good Compression selling only $100 Fixed.
15 size force pull start engine run in only selling $50 Fixed
75mzh Futaba controller 3PDF with 2 servo & mini Receiver
still very new selling $ 180neg. sold
Hobao hyper ten with 12 OS CVR engine run only 15 tank of nitro
bought for 2 mths upgrade alloy upper deck, alloy gear box plate front & back with some spare parts. No electronic. Selling $399
neg With electronic & 3PDF control $ 550 neg very good condition
GS Vision pro with 12 size Nova 3 port turbo engine. With 1100 receiver battery pack 3PDF controller , mini receiver, Sterring Sanwa ZR servo, Throtle Sanwa 112 servo & Ko po pro fail safe.
Run only 4 tanks of nitro. Very Very good condition. Will throw in charger for receiver battery pack. Selling $1100 neg. With lots of spare parts. If really interested can adjust the price.
V1S with 12CVR engine with some spares & hop up selling $180
Interseted please call 9455 8297
![cartoon is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3979
Tech Rookie
![Talking](https://www.rctech.net/forum/images/icons/icon10.gif)
looking for buyer for my pureten with new engine and exhuast pipe,futaba controller,am receiver and servo.pls pm mi or call mi if interested,hp:97696980.thanks,i will be waiting.pls this is urgent.
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![marclow78 is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3980
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
!!SALE!!
1)One 30 size Helicopter with 7 channel
Rodio control & gyro (engine Powered)Price :S$ 1,000/-
2)One BRAND NEW MUGEN MTX2 G/p with BRAND NEW
M8 controller(Whole set wif everything) Price :S$ 1,200/-
3)One unit Tamiya Tractor Truck (56303)
One unit Tractor Truck King Hauler (56301)
With :a)Effects set, b)Electrical unit set,
c)Semi-Trailer Light set, d) Tractor Truck oil,
e) Truck Aluminum Front/Rear rim (18 pcs),
f)Roof Spoiler, g) Motorized Support legs,
h)Animal Guard.Price : S$ 1,800/-
4)One 1/8 TMAXX G/P Off road car.Price :S$ 500/-
Helpin My Friend to sell.
Interested Pls Contact Ricky @ 96397019.
1)One 30 size Helicopter with 7 channel
Rodio control & gyro (engine Powered)Price :S$ 1,000/-
2)One BRAND NEW MUGEN MTX2 G/p with BRAND NEW
M8 controller(Whole set wif everything) Price :S$ 1,200/-
3)One unit Tamiya Tractor Truck (56303)
One unit Tractor Truck King Hauler (56301)
With :a)Effects set, b)Electrical unit set,
c)Semi-Trailer Light set, d) Tractor Truck oil,
e) Truck Aluminum Front/Rear rim (18 pcs),
f)Roof Spoiler, g) Motorized Support legs,
h)Animal Guard.Price : S$ 1,800/-
4)One 1/8 TMAXX G/P Off road car.Price :S$ 500/-
Helpin My Friend to sell.
Interested Pls Contact Ricky @ 96397019.
![stratuskyo is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3981
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
[QUOTE]Originally posted by marclow78
[B]looking for buyer for my pureten with new engine and exhuast pipe,futaba controller,am receiver and servo.pls pm mi or call mi if interested,hp:97696980.thanks,i will be waiting.pls this is urgent.
bro here pls dont try to be funny.. pls post in the selling part not to open a box....... it will look massy if every one like you open here open there.....
[B]looking for buyer for my pureten with new engine and exhuast pipe,futaba controller,am receiver and servo.pls pm mi or call mi if interested,hp:97696980.thanks,i will be waiting.pls this is urgent.
bro here pls dont try to be funny.. pls post in the selling part not to open a box....... it will look massy if every one like you open here open there.....
![sneaky](https://www.rctech.net/forum/classic_images/smilies/sneaky.gif)
![poolman51 is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3982
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Originally posted by marclow78
looking for buyer for my pureten with new engine and exhuast pipe,futaba controller,am receiver and servo.pls pm mi or call mi if interested,hp:97696980.thanks,i will be waiting.pls this is urgent.
Everyone selling in the selling threat also desprate!
looking for buyer for my pureten with new engine and exhuast pipe,futaba controller,am receiver and servo.pls pm mi or call mi if interested,hp:97696980.thanks,i will be waiting.pls this is urgent.
Everyone selling in the selling threat also desprate!
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![cartoon is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3983
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Tamiya 1/20 Radio Controlled Sail Boat - The Yamaha 40EX
Kit number 56204
1)Unassembled and Brand New in Box.
2)Easy to assemble with very clear instructions.
3)Height of completed boat is 1110mm.
4)Super realistic.
5)Wooden display stand is included.
6)A lot of details: ABS plastic hull and deck molded in white, removable keel, aluminum mast, spincloth sails etc.
7)Do not need special sail winch servos, standard ones (sold separately)will do.
Please pm if interested.
Kit number 56204
1)Unassembled and Brand New in Box.
2)Easy to assemble with very clear instructions.
3)Height of completed boat is 1110mm.
4)Super realistic.
5)Wooden display stand is included.
6)A lot of details: ABS plastic hull and deck molded in white, removable keel, aluminum mast, spincloth sails etc.
7)Do not need special sail winch servos, standard ones (sold separately)will do.
Please pm if interested.
Last edited by BlurKing; 06-16-2003 at 08:37 AM.
![BlurKing is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3984
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Tamiya 1/20 Scale Yamaha Round the World Radio Controlled Sail Boat
Kit number 56202
1)1/20-scale, fully functional R/C replica of the '94 winner of the Whitbread Round-the-World yacht race
2)Unassembled and Brand New in Box.
3)Easy to assemble with very clear instructions.
4)Height of completed boat is super tall - 1814mm.
5)Super realistic.
6)Sturdy wooden display stand is included.
7)One-piece, pre-painted blue and white hull molded in ABS resin, a scale aluminum mast, spincloth sails are made of the same fabric used on the full-size vessel.
8)Requires one sail winch servo and one normal servo(both sold separately).
Please pm if interested
Kit number 56202
1)1/20-scale, fully functional R/C replica of the '94 winner of the Whitbread Round-the-World yacht race
2)Unassembled and Brand New in Box.
3)Easy to assemble with very clear instructions.
4)Height of completed boat is super tall - 1814mm.
5)Super realistic.
6)Sturdy wooden display stand is included.
7)One-piece, pre-painted blue and white hull molded in ABS resin, a scale aluminum mast, spincloth sails are made of the same fabric used on the full-size vessel.
8)Requires one sail winch servo and one normal servo(both sold separately).
Please pm if interested
Last edited by BlurKing; 06-16-2003 at 08:53 PM.
![BlurKing is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3985
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Tamiya TA04-TRF brand NEW but assembled! Includes almost all modified parts for the TA04 including the SSG chassis. I'll include FEDEX shipping!
Make me an offer!
send offers through PM.
Make me an offer!
send offers through PM.
![paulc is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3986
Tech Addict
iTrader: (1)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Anyone interested in a Yokomo MR4TC world edition...
The kit only went for two races......
Also Includes: MR4TC SP conversion kit
SSG upper deck and shock towers
front and back roll bar
quite abit of spare parts
one futaba ball bearing servo
The SP conversion kit and the SSG stuffs is new...fixed but nv used b4..
U can view the car at J Cube.( www.jcube-hobby.com )
(http://www.jcube-hobby.com/gallery/thumbnails/249.jpg)
selling arouud $420 and below....
interested can view the car at J Cube or call me at 96383717...wan to sell off asap
The kit only went for two races......
Also Includes: MR4TC SP conversion kit
SSG upper deck and shock towers
front and back roll bar
quite abit of spare parts
one futaba ball bearing servo
The SP conversion kit and the SSG stuffs is new...fixed but nv used b4..
U can view the car at J Cube.( www.jcube-hobby.com )
(http://www.jcube-hobby.com/gallery/thumbnails/249.jpg)
selling arouud $420 and below....
interested can view the car at J Cube or call me at 96383717...wan to sell off asap
![lonestar1127 is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3987
Tech Adept
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Selling seldom used Yokomo MR4TC-Custom 1/10 touring car. Have got many many spares for the car. Interested please e-mail [email protected] or PM for more info.
Selling at only $150 for everything including the spares!!! The spares itself already worth more than $150!
Get it for the coming Yokomo Race!
Spares:
1. Front pulley belt
2. Rear pulley belt
3. Upper and lower Shock mount (2 paks)
4. Knuckles (4 paks)
5. King pin (1 pak)
6. Diff rings (2 paks)
7. Pulleys
8. Hinge pins
9. Thrust bearings
10. Diff housings
11. Roll bars
12. Blue and yellow, orange springs
13. Front arms
14. Rear Arms
15. Center One-way
16. Screws sets for hinge pins
17. Camber links balls
18. Shock pistons
19. Nylon arms
20. Hub carrier
21. Other bits and pieces...
Selling at only $150 for everything including the spares!!! The spares itself already worth more than $150!
Get it for the coming Yokomo Race!
Spares:
1. Front pulley belt
2. Rear pulley belt
3. Upper and lower Shock mount (2 paks)
4. Knuckles (4 paks)
5. King pin (1 pak)
6. Diff rings (2 paks)
7. Pulleys
8. Hinge pins
9. Thrust bearings
10. Diff housings
11. Roll bars
12. Blue and yellow, orange springs
13. Front arms
14. Rear Arms
15. Center One-way
16. Screws sets for hinge pins
17. Camber links balls
18. Shock pistons
19. Nylon arms
20. Hub carrier
21. Other bits and pieces...
![melvin is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3988
Tech Adept
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Selling Xpress Sponge Tires (2 Sets)
Reserved
Selling NIB Xpress Sponge Tires.
2 Sets available. 1 set (2 pairs) selling for $16 only. Buy 2 sets at further discounted price of $30
Pls PM your contacts
Reserved
Selling NIB Xpress Sponge Tires.
2 Sets available. 1 set (2 pairs) selling for $16 only. Buy 2 sets at further discounted price of $30
Pls PM your contacts
![melvin is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3989
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
1/10 Serpent Impulse PRO spec for sale....
Come with....
Full Alum. option parts
Many NIP spare parts
6V battery pack
4mm chassis (Only afew scratches)
Front one way & Rear straight shaft
Extra set of diff for front & rear
3 New belts all replaced
3 port Nova Mega Turbo engine side exhaust + pipe + minifold
No tyres & cover.....
Selling = S$690 (Guarantee in good condition)
Interested pls SMS or PM for viewing.
Come with....
Full Alum. option parts
Many NIP spare parts
6V battery pack
4mm chassis (Only afew scratches)
Front one way & Rear straight shaft
Extra set of diff for front & rear
3 New belts all replaced
3 port Nova Mega Turbo engine side exhaust + pipe + minifold
No tyres & cover.....
Selling = S$690 (Guarantee in good condition)
Interested pls SMS or PM for viewing.
![Eric Cheng is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
#3990
Tech Adept
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Selling very new Yomoko Zap 2 3000 HV (2 packs) Superb punch. Soldered with heavy duty Yokomo batteries tabs. These batteries cost me $135 per pack.
Selling now at only at $55 each pack (Way below half price)
Pls PM your contact numbers
Selling now at only at $55 each pack (Way below half price)
Pls PM your contact numbers
![melvin is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)