R/C Stuff Selling
#3226
Used Tamiya Nissan 350Z TL-01 with the following options
- 24 pcs of 11 x 5 bearings
- Speed tuned gear set
- TA03 Ball Diff
- Long Arm Suspension Set
- Lightweight chassis
Original friction dampers, chassis, 350Z Bodyshell... all new and unused. Car is used only for 1 race only. Going for $250 Neg.
NIB Tamiya Type T Stock motor, 1 pc - $35
Used 1700 stick packs, 2 pcs. $20 each. Only 2 charges on each pack.
Interested buyers please PM. Super bargain hunters please look elsewhere.
- 24 pcs of 11 x 5 bearings
- Speed tuned gear set
- TA03 Ball Diff
- Long Arm Suspension Set
- Lightweight chassis
Original friction dampers, chassis, 350Z Bodyshell... all new and unused. Car is used only for 1 race only. Going for $250 Neg.
NIB Tamiya Type T Stock motor, 1 pc - $35
Used 1700 stick packs, 2 pcs. $20 each. Only 2 charges on each pack.
Interested buyers please PM. Super bargain hunters please look elsewhere.
#3227
Tech Elite
Re: MRX3 FOR SELL
Originally posted by MrChan
Anyone want to buy Airbush Set !!
1. BADGER 200 , Single Action + Compressor . only 260$SG ( Very new ). Brand new is about 280$ for Compressor and 180$ for Airbush but sell only 260$
2. MRX3 + NOVA RACE Engine + Nova Rossi Pipe (Good Compression, No electric) and Pluse the spare parts as below :
MRX3 Spare Parts .
- Rear Bulkhead 1 Set
- Front Bulkhead 1 Set
- Upper Arm MRX3
- Damper Cap Parts 2 Sets
- Servo Saver Arm
- Pulley Set
- Rear Lower Arm 1 Set
- Front Lower Arm 3 Sets
- Front Half Shaft Drive 2 Sets
- Inner Drive Joint Set 2 Sets
- Clutch Shoe
- 1st gear 17T
- 1st gear 49T 3 Sets
- 1st gear 50T 2 Sets
- 2nd gear 45T 3 Sets
- 2nd gear 46T 2 Sets
- Front Lower Sus Shaft 1 Set
- Rear Lower Sus Shaft 1 Set
- Shoe for 2 speed gear box 1 set
- Front Bumper 1 Set
- Front Upper Right 1 Set
- Damper Plastic Parts 1 Set
- Front Body Mount 1 Set
- Titanuim Steering Rod 1 Set
- Grommet 1 Set
- Roller Pin Set 1 Set
- Front Belt 1 Set
- Rear Belt 1 Set
Spare Parts Almost 300$SG ++ , All go for 950$SG ( Price negotiate) or only car + engine 750$ or Car Only 550$SG. .Please SMS me at 98273935
Anyone want to buy Airbush Set !!
1. BADGER 200 , Single Action + Compressor . only 260$SG ( Very new ). Brand new is about 280$ for Compressor and 180$ for Airbush but sell only 260$
2. MRX3 + NOVA RACE Engine + Nova Rossi Pipe (Good Compression, No electric) and Pluse the spare parts as below :
MRX3 Spare Parts .
- Rear Bulkhead 1 Set
- Front Bulkhead 1 Set
- Upper Arm MRX3
- Damper Cap Parts 2 Sets
- Servo Saver Arm
- Pulley Set
- Rear Lower Arm 1 Set
- Front Lower Arm 3 Sets
- Front Half Shaft Drive 2 Sets
- Inner Drive Joint Set 2 Sets
- Clutch Shoe
- 1st gear 17T
- 1st gear 49T 3 Sets
- 1st gear 50T 2 Sets
- 2nd gear 45T 3 Sets
- 2nd gear 46T 2 Sets
- Front Lower Sus Shaft 1 Set
- Rear Lower Sus Shaft 1 Set
- Shoe for 2 speed gear box 1 set
- Front Bumper 1 Set
- Front Upper Right 1 Set
- Damper Plastic Parts 1 Set
- Front Body Mount 1 Set
- Titanuim Steering Rod 1 Set
- Grommet 1 Set
- Roller Pin Set 1 Set
- Front Belt 1 Set
- Rear Belt 1 Set
Spare Parts Almost 300$SG ++ , All go for 950$SG ( Price negotiate) or only car + engine 750$ or Car Only 550$SG. .Please SMS me at 98273935
#3228
1/10 touring rims sale
Rims for sale.......8 rims for SGD10.....colour comes in 3 variety....black, white and yellow as seen....interested please sms +6596554691 or +6598222761
#3229
For Sale
Keyence 2002 Zero V.....NIB.....S$260..
Eagle Racing CDC Version 6B.....Used BUT Very Good Condition...S$220..
PM Me if Interested....
Eagle Racing CDC Version 6B.....Used BUT Very Good Condition...S$220..
PM Me if Interested....
#3230
Tech Elite
iTrader: (5)
Hardcore Racing parts for T-Maxx .
Extended chassis conversion kit $ 300.00 NIB
( Kit include ext rear skid plate, ext drive shaft, engine mount, .21 manifold )
Front titanium skid plate $ 50.00 NIB
Centre titanium skid plate $ 40.00 NIB
Centre alumin brace $ 80.00 NIB
Front & Rear alumin gear box $ 80.00 NIB
RPM alumin spurs with ball bearing $50.00 NIB
All above items are for T-maxx
Matt Franics Limited Edition Transmitter bag selling $65.00 (Brand New only 500pcs in e RC market )
Kyosho robot gunwalker selling $100.00. Assemble but hardly play. Blue colour.
Trinity D5 flatliner mod motor for sale. 13 turn single selling $110.00. NIB
RPM dust cover for losi XXX-T. Blue colour. $10.00.NIB
Tech Racing carbon graphite chassic for F201. Original price i bought is about $200.00. Now selling at $120.00. Brand new.
Picco 1/8 buggy engine G1 XP-21 PRO-BV for sale. Brand new.
Market price for this engine cost about 480.00. Now selling at 400.00. Come with booster.
Interested please call Tony at 97517372. Price Neg.
Extended chassis conversion kit $ 300.00 NIB
( Kit include ext rear skid plate, ext drive shaft, engine mount, .21 manifold )
Front titanium skid plate $ 50.00 NIB
Centre titanium skid plate $ 40.00 NIB
Centre alumin brace $ 80.00 NIB
Front & Rear alumin gear box $ 80.00 NIB
RPM alumin spurs with ball bearing $50.00 NIB
All above items are for T-maxx
Matt Franics Limited Edition Transmitter bag selling $65.00 (Brand New only 500pcs in e RC market )
Kyosho robot gunwalker selling $100.00. Assemble but hardly play. Blue colour.
Trinity D5 flatliner mod motor for sale. 13 turn single selling $110.00. NIB
RPM dust cover for losi XXX-T. Blue colour. $10.00.NIB
Tech Racing carbon graphite chassic for F201. Original price i bought is about $200.00. Now selling at $120.00. Brand new.
Picco 1/8 buggy engine G1 XP-21 PRO-BV for sale. Brand new.
Market price for this engine cost about 480.00. Now selling at 400.00. Come with booster.
Interested please call Tony at 97517372. Price Neg.
#3231
Tech Apprentice
Antique KYOSHO
COLLECTORS
A 20++ Years old Mint in the box Antique Kyosho Electric 1/12 car
Interested party SMS me @90884228
A 20++ Years old Mint in the box Antique Kyosho Electric 1/12 car
Interested party SMS me @90884228
#3232
Tech Elite
iTrader: (5)
SELLING 2ND HAND XXX-S
XXX-S for sale
Car kit comes with:
Full graphite
Trinity red alumin battery holder
Trinity red alumin steering knuckles
Trinity red alumin motor mount
Trinity red alumin motor clamp
Trinity red alumin wheel hex
Trinity red alumin servo mount
Trinity red alumin steering bellcrank
Trinity red alumin front arm, front mounts, 0/4 deg
Trinity red alumin front arm, rear mounts L/R
Trinity red alumin rear arm, rear mounts, 0/4 deg
Trinity red alumin rear arm, front mounts L/R
Trinity red alumin motor heat sink
Lightweight red alumin screws
Red front bumper
Front bumper brace
Rear lightweight CVD
Treaded shocks with titanium shaft ( Front & Rear )
Lunsford titanium turnbuckle
Lunsfold titanium hinge pin
Carbide ball for front balldiff
Car is in good condition.
Everything goes for $400.00.
Will throw in 1 pc Trinity P94 11turn double motor ( Used )& 1 pc Losi black T-shirt ( NEW ) & 1 Futaba high speed servo( metal gear ).
Interested please call Tony at 97517372
XXX-S for sale
Car kit comes with:
Full graphite
Trinity red alumin battery holder
Trinity red alumin steering knuckles
Trinity red alumin motor mount
Trinity red alumin motor clamp
Trinity red alumin wheel hex
Trinity red alumin servo mount
Trinity red alumin steering bellcrank
Trinity red alumin front arm, front mounts, 0/4 deg
Trinity red alumin front arm, rear mounts L/R
Trinity red alumin rear arm, rear mounts, 0/4 deg
Trinity red alumin rear arm, front mounts L/R
Trinity red alumin motor heat sink
Lightweight red alumin screws
Red front bumper
Front bumper brace
Rear lightweight CVD
Treaded shocks with titanium shaft ( Front & Rear )
Lunsford titanium turnbuckle
Lunsfold titanium hinge pin
Carbide ball for front balldiff
Car is in good condition.
Everything goes for $400.00.
Will throw in 1 pc Trinity P94 11turn double motor ( Used )& 1 pc Losi black T-shirt ( NEW ) & 1 Futaba high speed servo( metal gear ).
Interested please call Tony at 97517372
#3235
Tech Initiate
Stuff for sale
selling some stuff for a fren giving up hobby:
1) kyosho ultima rb type r ep 2wd buggy, ran a few times, come with the following:
- 4 x rear arms
- 4 x front arms
- 1 pack x UM112 4.8mm ball ends
- 2 packs x SP107V2 2* rear hubs
- 1 pack x UM107 front chassis
- 1 pack x UM106 front upper plate
- 2 packs x UM133 rear inner hinge pin
- 2 packs x UM132 front inner hinge pin
- 1 x gearbox set
- 3 packs x rear arm mount
- 2 packs x front hub
- 1 pack x UM123 slipper pad
- 1 pack x UM303 main gear shaft
- 1 x rear shock tower
- 1 x front bumper
- 1 x rear bumper
all going for $180. only interested buyers PM me for more details.
1) kyosho ultima rb type r ep 2wd buggy, ran a few times, come with the following:
- 4 x rear arms
- 4 x front arms
- 1 pack x UM112 4.8mm ball ends
- 2 packs x SP107V2 2* rear hubs
- 1 pack x UM107 front chassis
- 1 pack x UM106 front upper plate
- 2 packs x UM133 rear inner hinge pin
- 2 packs x UM132 front inner hinge pin
- 1 x gearbox set
- 3 packs x rear arm mount
- 2 packs x front hub
- 1 pack x UM123 slipper pad
- 1 pack x UM303 main gear shaft
- 1 x rear shock tower
- 1 x front bumper
- 1 x rear bumper
all going for $180. only interested buyers PM me for more details.
#3236
Tech Initiate
Stuff for sale
tamiya f103 fitted with the following:
- tamiya option carbon chassis
- tamiya option soft t-bar
- tamiya option upper deck
- tamiya option steering turnbuckles
- front link type suspension
- glass fibre rear shaft
- tamiya purple alu motor mount with ride height adjustments
- a few sets of tires and rims
all the above going for $180 neg. only interested buyers please PM me for more details.
- tamiya option carbon chassis
- tamiya option soft t-bar
- tamiya option upper deck
- tamiya option steering turnbuckles
- front link type suspension
- glass fibre rear shaft
- tamiya purple alu motor mount with ride height adjustments
- a few sets of tires and rims
all the above going for $180 neg. only interested buyers please PM me for more details.
#3237
Tech Initiate
Stuff for sale
tamiya f201 ferrari, car has been assembled for display purposes, never run before. selling for $220 neg, only interested parties pls PM me for more details.
#3238
selling sum cheap stuffs
nd to clear all!!
force engine with pullstarter (blue head)-------40nett
http://rotor.com.sg/car/force_eng_main.htm
sanwa blazer controller 40 mhz am, ------15 (with freq crystals =20)
sanwa blazer controller 27mhz,am--------15
40.735 mhz am crystal(1 pair)---------5
Sanwa Super Vortex 308HF(no limit, fwd, brake)(deans)------reduce price----50NETT
Tamiya F103 with body, and sum hop up....new tires---60NETT
Tamiya TA04 K Spare parts(A NIB)-----5
sms me to deal...94871269... can PM me also....
nd to clear all!!
force engine with pullstarter (blue head)-------40nett
http://rotor.com.sg/car/force_eng_main.htm
sanwa blazer controller 40 mhz am, ------15 (with freq crystals =20)
sanwa blazer controller 27mhz,am--------15
40.735 mhz am crystal(1 pair)---------5
Sanwa Super Vortex 308HF(no limit, fwd, brake)(deans)------reduce price----50NETT
Tamiya F103 with body, and sum hop up....new tires---60NETT
Tamiya TA04 K Spare parts(A NIB)-----5
sms me to deal...94871269... can PM me also....
#3239
Tech Elite
iTrader: (1)
Update on things for sale ......
Cheap! cheap!
1. Eagle Ride Height guage(good as new)Purple color $6 Sold
2. New (120cc) bottle of Kyosho Air-filter oil $8 (Great for buggies)
3. 2 x used Tamiya sport tuned motors $5 each Sold
4. Fail-safe $20
4. Mugen Seiki prospec tool 2mm allen wrench(good as new) $14
Interested pls contact me at 96300297
Cheap! cheap!
1. Eagle Ride Height guage(good as new)Purple color $6 Sold
2. New (120cc) bottle of Kyosho Air-filter oil $8 (Great for buggies)
3. 2 x used Tamiya sport tuned motors $5 each Sold
4. Fail-safe $20
4. Mugen Seiki prospec tool 2mm allen wrench(good as new) $14
Interested pls contact me at 96300297
Last edited by Nipple; 05-05-2003 at 07:28 AM.
#3240
selling picco rs600 compact with turbo engine and pipe (FAST CAR)
$250 WAN IT EMAIL at [email protected] last car to let go
$250 WAN IT EMAIL at [email protected] last car to let go