haody

iTrader: (1)

New 1/10 wheels with tyres for sale. never been use before.

1 set of new Tamiya 10 spoke metal pated wheels with premount radial - $30
bought from stargek.

1 set of new HPI AERO-DISH WHEEL 24mm WHITE with premount slick racing tyres - $30
bought from tai sing.


please sms 96926315 to deal. thanks.

BryanLow

Hi,

Selling 27Mhz Futaba HRS R203HF receiver. In good condition 9.5/10.

Selling at $70 with 27.025FM Crystal.

Item Sold. Thanks for viewing.

l1ght

iTrader: (1)

hi there ppl i am selling off somethings

1)droop gauage ($10)


2)selling off my tt01...it comes with a hobao h-1014 servo, tamiya sports tune motor, a tamiya stock esc, many spare parts and two bash shells...all u nid is tx, rx, battery and a charger to play...selling at $220(nego) only

here some picture


3)TA04 hard front.upright open but unused($5)

pls sms me at 81123301 if u are interested or if u wan other specific picture

thank you

handiman

iTrader: (11)

Letting go a great condition 1/10 HPI R40 Nitro Pro Touring Car. This is the same car used by Atsushi Hara to win the ROAR Nationals. Kit has lots of hop-ups (*bling bling* purple and carbon fibre parts) and spares worth over $80. Comes complete with manual and set-up sheets and complimentary bodyshell. Requires electronics, engine with pipe, batteries and fuel to run. Currently retailing at $500+ for kit alone at Tai Seng. Still can competitive compared to current newer models! Good value!

Spares include :
1) NIP 93312 Turnbuckles x 2
2) NIP 72075 Axles
3) NIP 93326 Turnbuckles
4) NIP 72445 Diff Shafts
5) NIP 33430 Urethane Belt x 2
6) NIP 72274 Servo Saver Shaft
7) NIP 72276 Shafts
8) Spare complete front Arms set
9) Engine Linkage set
10) Rear hubs, Front knuckles, Front gear box, Chassis Stiffener, Differential casing, spare universal shafts, front shock mount etc....

Looking at $200. Pls sms 93382461 or PM if interested. Thanks!

handiman

iTrader: (11)

Brand New In Box and still sealed Kyosho 1/10 V One RRR Kit. World Championship winner and performance right out of the box! Still competitive with the newer Evo models. Currently retailing at $500+++. Grab a bargain!! Requires electronics, engine + pipe, fuel, batteries and bodyshell to run. Pls check site for more information : http://www.toykar.com/viewprod.php?pid=669

Looking at $360.
Please sms 93382461 or PM if interested. Thanks!

Ekmage

iTrader: (10)

HI bros selling my Apex Infinity Charger for a low price of $90.. Great condition see pic to believe. Pls contact me at 92300693

Reason: Upgrading

Specification:
Input Voltage: DC 11V to 15V, 12V lead-acid battery or APEX V12 220V AC S.P.S
Current drain: max approx 10A
Normal battery voltage: 1.2V to 12.0V (1 to 10 NICD / NIMH cells)
Charge current: 0.1A to 6.5A up to 15V, 0.1A to 4.0A over 15V
Automatic charge termination: Delta Peak process
Trickle charge current: approx. 80mA
Discharge current: 0.1A to 3.0A
Discharge termination: automatic, at approx. 0.8V / cell
Max. discharge power: approx. 25W
Protective functions: Polarity protection at input and output, short-circuit protection on output, overheating protection, low voltage protection.
Fuse: 7.5A car fuse
Dimensions: approx. 100*140*52mm

thekthai

iTrader: (7)

HpI pro4 gd condition..( some little bit spare part ) $240 nego (RESERVED )

self collect

93351986

kaine77

iTrader: (2)

bros,

my friend will like to sell his traxxes mt, not sure which model but got hop ups .

it comes with the bellow:
Rolling Chasis with tyres/rims
bash shell
spare tyres and rims

asking for 200 negotiable. It looks like a dominator but its traxxes.
pm for enquires and viewing

BryanLow

Limited Edition TRF 415 MSXX MRE Chasis with NSX Bodyshell,wheels and Tyres.

Selling for $450. (Neg)

Condition 9.0/10.

Usual scratches below chasis.
Some spares to give away.

Pro chasis set.

Item Sold! Thanks for viewing.

haroldlouiz

iTrader: (1)

for sale

1.TAMIYA TB EVOLUTION V, those that are interested let me know, and quote me a reasonable price, chassis is with chassis protector, good condition. only used for drifting only, nv tour before, come with ti screws, and just service the car with new bearings, and gearing, spur. all done up and ready for sales.

for those that msg me, sorry as i'm really busy and dont have a camera currently, will call ur back when i have posted the picture give me a week or so. and as for those that have quoted me, the average is abt $350. yups.

will throw in wateva spares i have for the evo5, and will throw in a unpainted citron rally shell.

2.Speedmind transmitter bag for 3pk/3pks(as good as new)($25)


3. 3pk/3pks 40mhz HRS syn module w/ HRS receiver as well. offer price. thanks

4. Hpi Trueno Bodykits, bought at taising for 36, i only use the light bucket from this bodykits. quote an offer, thanks



5. Hpi NIP Silvia S15 shell. @ $35

6. Carbon batt holder $15

deal at hougang.
LAS or Sengkang drift meet.

sms to 90673238
harold

thirtycents

iTrader: (1)

Orion Vortex 2008 Race 7.5T
10/10 working condition, 8/10 physical condition (scratched due to body roll)
Bought from RC Mart on 07 Sept 08, goin for $85. Please call 96993990 for more details. Please txt mi if u can as i dun login very often, thanks!

RC Mart
http://www.rcmart.com/catalog/rc-mot...?cPath=293_946

Team Orion
http://www.teamorion.com/Products/Vo...rs/Vortex+Race

Items in Box


Scratches


Motor Itself


Box

silverback79

iTrader: (2)

upz

yoggyong

iTrader: (105)

Selling on behalf of my fren.. A great condition and almost with full hop-ups TT01 for sale..















Lots of spares to go with it..

Here's the break down of parts with rough estimate of its prices:

1 TRF dampers (new is abt $100)
2 Original Tamiya Steering link full set ($70plus)
3 Original Tamiya Front and Rear Ball-diff set ($100, abt $50 plus per set)
4 Original Tamiya Alu shaft with Alu cup set ($20plus)
5 Topcad shaft one-way set from rcmart ($20plus with freight charges)
6 Original Tamiya Aluminium Bumper plate ($10)
7 GPM Rear Alu knuckles ($30, abt $15 each)
8 GPM Front Alu knuckles ($30, abt $15 each)
9 GPM Rear Alu Lower arms ($28, abt $14 each)
10 GPM Front Alu Lower arms ($28, abt $14 each)
11 GPM Alu Gear box stay ($12 a pair)
12 GPM Alu batt plate ($13)
13 Original Tamiya TT01 Carbon Upper Deck ($20)
14 Original Tamiya Blue Alu wheel caps (cant rem, shld be ard $15)
15 Original Tamiya Blue Alu wheel screws ($10)
16 Original Tamiya Adjustable Upper arms (Front and Rear, $15)

No electronics included.. Selling just the chassis.. However if u need it RTR, can be discussed and arranged..

Hopped-up parts alone already spent $500plus on them.. Now plus the TT01 chassis is already worth abt $700plus..

Asking only $300.. A great full-hopped chassis!! Willing to throw in a brand new bath tube chassis and rebuilt it if the price is right! Contact me direct for discussion or non-obligated viewing! Cheers and thx for looking! 98464567, Youyi..

Z_SHUAI

Selling a used TA05MS & TF5 carbon fiber chasiss as per pictures.
Condition: 9/10 both have very minor scratch at bottom with some personal performance mod. 400S$ FOR TA05MS & 250S$ FOR TF5 (+alot spec)







SANWA 40MHz TX/RX 150S$


SANWA EGR-VR Highspeed servo 100S$ each


hp:92771349

TOMJR

iTrader: (3)

Nova Max engine for sale .12 M.F Tune (5c)
Selling for $250 (engine still in tiptop condition)


Nova 353 engine for sale .12 (2008 version)(Lighten crankshaft)
Selling for $300 (Engine in tiptop condition)

Call or sms me at 96780943