R/C Stuff Selling
10-02-2007, 10:38 PM
Tech Rookie
WTS: HPI Savage25 RTR - with lots of extras
I have a almost new HPI Savage25 RTR for sale, it was started up and tuned by the shop, run only a about 5 times (tanks), condition is almost new. I bought it in America about 1.5 years ago while I was working there. Shipped it back to Singapore and never once used it here. This truck has never even been off road, the engine run in was done in a parking lot. Then care was taken to store with after run oil.
Read about this truck here http://www.hpiracing.com/kits/kitMain.php?partNo=832
Extra's include Reverse Module (SGD$200.00), Glow Plug Igniter and Charger (110W), Rechargeable Receiver Battery Pack, Hot Bodies Aluminum Tuned Pipe, Fuel Bottle. Original HPI Glow Plug (New Unopened) Probably close to SGD$400.00 in extra's.
Im asking SGD$699.00 for it. Price is negotiable for serious buyers. I’m located in the east coast Bedok, viewing can be done here.
Please call or sms 9339-8843 to deal. Please dont PM, seldom online. Thank You.
Read about this truck here http://www.hpiracing.com/kits/kitMain.php?partNo=832
Extra's include Reverse Module (SGD$200.00), Glow Plug Igniter and Charger (110W), Rechargeable Receiver Battery Pack, Hot Bodies Aluminum Tuned Pipe, Fuel Bottle. Original HPI Glow Plug (New Unopened) Probably close to SGD$400.00 in extra's.
Im asking SGD$699.00 for it. Price is negotiable for serious buyers. I’m located in the east coast Bedok, viewing can be done here.
Please call or sms 9339-8843 to deal. Please dont PM, seldom online. Thank You.
10-02-2007, 11:13 PM
Tech Adept
iTrader: (2)
http://sg.pg.photos.yahoo.com/ph/ed7...odid=&.done=ht tp%3a//sg.pg.photos.yahoo.com/ph/ed76025/my_photos%3furlhint=actn,del%253as,1%253af,0tires mounted on HB dish rims 2 sets for sale
1 set of wheels proline badlands tire(cond 8/10)=$30
1 set of wheels panther komodo dragon(cond 8/10)=$30
or take 2 sets for $50
all tires still in good cond
r/c mags for sale at $3ea
or take all for $30(13 mags)
ALL PRICES STATED NON NEG
inter pls sms me at 93545415
CHEERS!!!
(all low ballers get lost)
1 set of wheels proline badlands tire(cond 8/10)=$30
1 set of wheels panther komodo dragon(cond 8/10)=$30
or take 2 sets for $50
all tires still in good cond
r/c mags for sale at $3ea
or take all for $30(13 mags)
ALL PRICES STATED NON NEG
inter pls sms me at 93545415
CHEERS!!!
(all low ballers get lost)
10-03-2007, 12:31 AM
Tech Rookie
Selling used Sanwa servos
2 unit of VB
2 unit of VR
$200 selling as a set only
PM contact detail.
2 unit of VB
2 unit of VR
$200 selling as a set only
PM contact detail.
10-03-2007, 01:53 AM
selling
selling lightly-tuned motor. 8/10 condition at $35 with box
selling reedy pulse-r 10x2 t motor at $60. ( selling cause too fast for me. still in good condition except sticker scratched by heatsink.)
selling mx-3 tx and 2rx at $170 only! (3 months old). condition like new!
selling yokomo 23t motor ran for only 3 times. good rpm.
condition 10/10 at only $55.
selling cleaner with sponge at only $12 sold away 13 bottles. left 17 bottles.
selling tamiya expec controller with receiver and crystal set. 27mhz. comes with 1 set of crystals. going at $70 fix. condition 10/10 REDUCED
selling eastpower 4200 batts with good punch soldered side by side with deans. condition 10/10. no scratches at all. peaking at exactly 4200. used less than 15 times. selling cause i need stick pack for mini.
selling battery option charger with auto peak detection and adjustable voltage up to 4amps for only $55. (good budget battery charger). condition 10/10.
selling TRF damper set (hard black coating) at $100 fix.
also looking for tamiya TA05 heatsink.
sms me at 90492628. thnx
selling reedy pulse-r 10x2 t motor at $60. ( selling cause too fast for me. still in good condition except sticker scratched by heatsink.)
selling mx-3 tx and 2rx at $170 only! (3 months old). condition like new!
selling yokomo 23t motor ran for only 3 times. good rpm.
condition 10/10 at only $55.
selling cleaner with sponge at only $12 sold away 13 bottles. left 17 bottles.
selling tamiya expec controller with receiver and crystal set. 27mhz. comes with 1 set of crystals. going at $70 fix. condition 10/10 REDUCED
selling eastpower 4200 batts with good punch soldered side by side with deans. condition 10/10. no scratches at all. peaking at exactly 4200. used less than 15 times. selling cause i need stick pack for mini.
selling battery option charger with auto peak detection and adjustable voltage up to 4amps for only $55. (good budget battery charger). condition 10/10.
selling TRF damper set (hard black coating) at $100 fix.
also looking for tamiya TA05 heatsink.
sms me at 90492628. thnx
10-03-2007, 02:21 AM
WTS - Mobil 1 SC bodyshell/New Goldcan Mabuchi Motor/Ansmann 18T ESC/pinion&wheel
Hi all,
I am selling my newly painted 1/10th Tamiya RC Mobil 1 SC bodyshell @$55 (neg).
Bodyshell holes are suitable for TA05 only.
Headlights and brakelights are not painted, suitable for drifting and race.
Instruction menu, bodyshell pins and remaining headlight decals that comes with it will be given away.
18Turn V/R Ansmann Racing ESC (with dean for battery) selling at $60.
New Goldcan 540 Mabuchi motor selling at $20.
Used silvercan motor selling at $12. (neg)
Futaba 3003 servo selling at $30.
Tamiya receiver selling at $20.
Crytals 27.095 mHz selling at $10.
Tamiya 46T/47T pinion set, 50T/51T pinion set, GO wheel and 40R wheel selling at $10 each.
Use less than 3 times 4300aHr GP match pack terminate with X11 wire and dean plug selling at $65.
Tamiya stick pack 7.2v discharger selling at $10.
Attachment are pictures taken for this bodyshell, ESC, Futaba 3003 servo/Tamiya reciever/crytals, wheels/pinions , stick pack and discharger only.
Plse pm or sms me at 97808210.
I am selling my newly painted 1/10th Tamiya RC Mobil 1 SC bodyshell @$55 (neg).
Bodyshell holes are suitable for TA05 only.
Headlights and brakelights are not painted, suitable for drifting and race.
Instruction menu, bodyshell pins and remaining headlight decals that comes with it will be given away.
18Turn V/R Ansmann Racing ESC (with dean for battery) selling at $60.
New Goldcan 540 Mabuchi motor selling at $20.
Used silvercan motor selling at $12. (neg)
Futaba 3003 servo selling at $30.
Tamiya receiver selling at $20.
Crytals 27.095 mHz selling at $10.
Tamiya 46T/47T pinion set, 50T/51T pinion set, GO wheel and 40R wheel selling at $10 each.
Use less than 3 times 4300aHr GP match pack terminate with X11 wire and dean plug selling at $65.
Tamiya stick pack 7.2v discharger selling at $10.
Attachment are pictures taken for this bodyshell, ESC, Futaba 3003 servo/Tamiya reciever/crytals, wheels/pinions , stick pack and discharger only.
Plse pm or sms me at 97808210.
10-03-2007, 02:40 AM
1) New built Tamiya Tamtech Porsche rolling chassis only.
Chassis built but never run. Body shell is new, uncut and unpainted.
Comes with box, manuals and whatever comes with the kit.
$100.
2) New and unused Hobao AM TX/RX with crystal from Hyper ST RTR.
$40.
5) OOP Tamiya Isuzu Mu (XC chassis). NIB. $450
6) Vintage Kyosho Sideway sprint car. NIB. $350
7) OOP Tamiya Volvo 850R (FF-01). NIB $250
8) OOP Tamiya Renault Alpine A110 (M-02). NIB $280
9) OOP Tamiya Lancia Rally (TA-03). NIB $250
10) OOP Tamiya Ford Escort WRC (TL-01). NIB $150
12) Vintage Tamiya JPS Lotus 79. New built with box and manual. $350.
13) OOP NIB Tamiya Tyrell 6 wheeler (re-release). $280.
14) OOP NIB Tamiya Blitzer Beetle. $280
15) OOP NIB Tamiya Promarkt Mercedes (TA-02) $280
16) Tamiya NIB Blackfoot extreme $180
17) Tamiya NIB Mercedes C11 (re-release) $170
18) Tamiya NIB TGR chassis kit. $250
PM please. Thanks.
Chassis built but never run. Body shell is new, uncut and unpainted.
Comes with box, manuals and whatever comes with the kit.
$100.
2) New and unused Hobao AM TX/RX with crystal from Hyper ST RTR.
$40.
5) OOP Tamiya Isuzu Mu (XC chassis). NIB. $450
6) Vintage Kyosho Sideway sprint car. NIB. $350
7) OOP Tamiya Volvo 850R (FF-01). NIB $250
8) OOP Tamiya Renault Alpine A110 (M-02). NIB $280
9) OOP Tamiya Lancia Rally (TA-03). NIB $250
10) OOP Tamiya Ford Escort WRC (TL-01). NIB $150
12) Vintage Tamiya JPS Lotus 79. New built with box and manual. $350.
13) OOP NIB Tamiya Tyrell 6 wheeler (re-release). $280.
14) OOP NIB Tamiya Blitzer Beetle. $280
15) OOP NIB Tamiya Promarkt Mercedes (TA-02) $280
16) Tamiya NIB Blackfoot extreme $180
17) Tamiya NIB Mercedes C11 (re-release) $170
18) Tamiya NIB TGR chassis kit. $250
PM please. Thanks.
10-03-2007, 02:41 AM
1) Used HotBodies Lightning Pro 2 rolling chassis with header, pipe and clutch.
Upgrade include 4mm hardened chassis plate, brakes, aluminum front and rear suspension blocks, heat sink engine mount.
Also comes with lots of spares.
Will throw in 2 more 1/8 GP buggy - an old Mugen (dunno wat model, most complete) + an old kyosho (dunno wat model... 1/2 complete)
All for $200. Please PM if interested.
2) Lightly used Hyper ST RTR . Everything that comes with the RTR EXCEPT the engine and the box. $400 ono.
Upgrade include 4mm hardened chassis plate, brakes, aluminum front and rear suspension blocks, heat sink engine mount.
Also comes with lots of spares.
Will throw in 2 more 1/8 GP buggy - an old Mugen (dunno wat model, most complete) + an old kyosho (dunno wat model... 1/2 complete)
All for $200. Please PM if interested.
2) Lightly used Hyper ST RTR . Everything that comes with the RTR EXCEPT the engine and the box. $400 ono.
10-03-2007, 02:53 AM
Selling off my sprint 2 stage d. Condition is considered brand new.
Just ran for 30 mins only.
I'll include the futaba mj too.
Spares will all be given, box will come with the kit too.
No bodyshell, esc and batt will be given. Selling off at $230.
Original cost is $270 for the kit, $120 for the controller set.
You gain, I lose.
Sms me at 81577021 soon.
No reservation. Just take and go. Best is deal at bishan mrt station.
Just ran for 30 mins only.
I'll include the futaba mj too.
Spares will all be given, box will come with the kit too.
No bodyshell, esc and batt will be given. Selling off at $230.
Original cost is $270 for the kit, $120 for the controller set.
You gain, I lose.
Sms me at 81577021 soon.
No reservation. Just take and go. Best is deal at bishan mrt station.
10-03-2007, 02:54 AM
Vintage Tamiya TA02 stuff for sales
Thinning down my collection and here are some Tamiya TA02 stuff for sale:
NIB GPM Alloy motor mount - $35.00
NIB GPM Alloy steering knuckle - $35.00
NIB GPM Alloy steering assembly - $35.00
NIB GPM Alloy rear upright - $30.00
NIB GPM TA01 / Top Force / Manta Ray Prop shaft (Dog bone design) - $45.00
NIB Tamiya Skyline speed tune gears - $10.00
Used Tamiya TA02/TA03 U-Shaft - $35.00
Manta Ray Differential Ball and Plate Set - $8.00
NIB TA03 Super Low Friction Shocks - $65.00
NIB 53200 4WD front One way diff unit - $20.00
NIB Manta Ray ball diff - $25.00
NIB TA03 Ball Diff - $30.00
NIB GPM C hub - $30.00
NIB GPM graphite front damper stay - $35.00
NIB GPM graphite rear damper stay - $35.00
NIB GPM alloy front gearbox guard - $55.00
NIB Tamiya uthreane bumper - $25.00
Used stock TA02 chassis - $10.00
No reservation, first come first serve. Self collect at my place at Dover Crescent. PM me if you are interested.
More to come when I finish rebuilding my TA02s
NIB GPM Alloy motor mount - $35.00
NIB GPM Alloy steering knuckle - $35.00
NIB GPM Alloy steering assembly - $35.00
NIB GPM Alloy rear upright - $30.00
NIB GPM TA01 / Top Force / Manta Ray Prop shaft (Dog bone design) - $45.00
NIB Tamiya Skyline speed tune gears - $10.00
Used Tamiya TA02/TA03 U-Shaft - $35.00
Manta Ray Differential Ball and Plate Set - $8.00
NIB TA03 Super Low Friction Shocks - $65.00
NIB 53200 4WD front One way diff unit - $20.00
NIB Manta Ray ball diff - $25.00
NIB TA03 Ball Diff - $30.00
NIB GPM C hub - $30.00
NIB GPM graphite front damper stay - $35.00
NIB GPM graphite rear damper stay - $35.00
NIB GPM alloy front gearbox guard - $55.00
NIB Tamiya uthreane bumper - $25.00
Used stock TA02 chassis - $10.00
No reservation, first come first serve. Self collect at my place at Dover Crescent. PM me if you are interested.
More to come when I finish rebuilding my TA02s
10-03-2007, 02:57 AM
Tamiya TA03 parts for sales
TA03 stuff for sale, they are NEW unless otherwise stated:
53278 TA03 Aramid Fiber reinforced Drive Belt - $15.00
49103 TA03FS/RS Red drive belt - $18.00
Cross Racing alloy TA03 Aluminium C hub - $30.00
Used alloy C hub (Blue) - $25.00
53280 TA03 Super Low Friction Aluminium Shocks - $65.00
53309 TA03 Titanium Hinge Pins - $30.00
53305 Light weight Aluminium Drive Shaft (Blue) - $15.00
New Aluminum Pulley (?T need to check) - $20.00
53386 TA03FS / RS Carbon Chassis Plates - $90.00
NEW Complete set of alloy arms (4 arms)- $45.00
Used alloy front steering knuckles $30.00
Used rear upright - US$25.00
More to come when I finalized the parts at the end of the week
No reservation, first come first serve. Self collect at my place at Dover Crescent. PM me if you are interested.
53278 TA03 Aramid Fiber reinforced Drive Belt - $15.00
49103 TA03FS/RS Red drive belt - $18.00
Cross Racing alloy TA03 Aluminium C hub - $30.00
Used alloy C hub (Blue) - $25.00
53280 TA03 Super Low Friction Aluminium Shocks - $65.00
53309 TA03 Titanium Hinge Pins - $30.00
53305 Light weight Aluminium Drive Shaft (Blue) - $15.00
New Aluminum Pulley (?T need to check) - $20.00
53386 TA03FS / RS Carbon Chassis Plates - $90.00
NEW Complete set of alloy arms (4 arms)- $45.00
Used alloy front steering knuckles $30.00
Used rear upright - US$25.00
More to come when I finalized the parts at the end of the week
No reservation, first come first serve. Self collect at my place at Dover Crescent. PM me if you are interested.
10-03-2007, 03:27 AM
PENDING COLLECTION
A used-but-in-good-condition Futaba S9402 High Torque Servo for sale at S$70.
Specs of S9402:
FEATURES: Hi-Torque
Coreless Motor
Two Ball Bearings
Metal Gears (brass and steel)
Dust and Water Resistant
Plated "J" type Connector (gold colored)
SPECS: Size: W 0.8" (20mm) x L 1.6" (41mm) x H 1.5" (38mm)
Weight: 1.9 ounces (55 grams)
Torque: 89 oz-in @ 4.8V - 111 oz-in @ 6V
(6.4 kg-cm @ 4.8V - 8.0 kg-cm @ 6V)
Transit time: .13 sec/60° @ 4.8V - .10 sec/60° @ 6V
Connector: "J" type with about 10" lead
---------------------------------------------------------------------------
One of the best servos I have used; simply reliable. Selling them because I can't use them for my new radio.
Please PM me directly.
Thanks!
Alfie
A used-but-in-good-condition Futaba S9402 High Torque Servo for sale at S$70.
Specs of S9402:
FEATURES: Hi-Torque
Coreless Motor
Two Ball Bearings
Metal Gears (brass and steel)
Dust and Water Resistant
Plated "J" type Connector (gold colored)
SPECS: Size: W 0.8" (20mm) x L 1.6" (41mm) x H 1.5" (38mm)
Weight: 1.9 ounces (55 grams)
Torque: 89 oz-in @ 4.8V - 111 oz-in @ 6V
(6.4 kg-cm @ 4.8V - 8.0 kg-cm @ 6V)
Transit time: .13 sec/60° @ 4.8V - .10 sec/60° @ 6V
Connector: "J" type with about 10" lead
---------------------------------------------------------------------------
One of the best servos I have used; simply reliable. Selling them because I can't use them for my new radio.
Please PM me directly.
Thanks!
Alfie
Last edited by Alfie; 10-04-2007 at 01:11 AM.
10-03-2007, 03:57 AM
New and used items for sale
SOLD. Thanks.
Last edited by zoomx; 02-05-2008 at 04:00 AM.
10-03-2007, 06:27 AM
Futaba 75 MHz Tx module, Rx and Crystals for sale:
1. Futaba FP-PK-FM Tx module for 3PK
2. Futaba PCM 1024 FP-113iP Rx
3. Two Crystals 75.93 and 75.82 MHz
Very good working condition. Selling all items for S$100
sms me at 92235812 if interested.
1. Futaba FP-PK-FM Tx module for 3PK
2. Futaba PCM 1024 FP-113iP Rx
3. Two Crystals 75.93 and 75.82 MHz
Very good working condition. Selling all items for S$100
sms me at 92235812 if interested.
10-03-2007, 07:00 AM
A used-but-in-good-condition Futaba S9402 High Torque Servo for sale at S$70.
Specs of S9402:
FEATURES: Hi-Torque
Coreless Motor
Two Ball Bearings
Metal Gears (brass and steel)
Dust and Water Resistant
Plated "J" type Connector (gold colored)
SPECS: Size: W 0.8" (20mm) x L 1.6" (41mm) x H 1.5" (38mm)
Weight: 1.9 ounces (55 grams)
Torque: 89 oz-in @ 4.8V - 111 oz-in @ 6V
(6.4 kg-cm @ 4.8V - 8.0 kg-cm @ 6V)
Transit time: .13 sec/60° @ 4.8V - .10 sec/60° @ 6V
Connector: "J" type with about 10" lead
--------------------------------------------------------------------------
Specs of S9402:
FEATURES: Hi-Torque
Coreless Motor
Two Ball Bearings
Metal Gears (brass and steel)
Dust and Water Resistant
Plated "J" type Connector (gold colored)
SPECS: Size: W 0.8" (20mm) x L 1.6" (41mm) x H 1.5" (38mm)
Weight: 1.9 ounces (55 grams)
Torque: 89 oz-in @ 4.8V - 111 oz-in @ 6V
(6.4 kg-cm @ 4.8V - 8.0 kg-cm @ 6V)
Transit time: .13 sec/60° @ 4.8V - .10 sec/60° @ 6V
Connector: "J" type with about 10" lead
--------------------------------------------------------------------------
