R/C Stuff Selling
Selling another Tamiya rolling chassis.
F103LM for S$180
[/COLOR]
What you see is what you get
F103LM for S$180
[/COLOR]
What you see is what you get
Last edited by jedmuster; 04-11-2007 at 01:33 AM.
Tech Master
iTrader: (33)
Its a TRF TA03RS
Originally Posted by jedmuster
Hi all!
Selling Fully Hopped-up Tamiya chassis (not sure if its a TA04SS or TB03 ) for S$200
With used Toyota MR-2 bodyshell
Used Tamiya slick tires/wheels.
Tamiya CVA shocks (not shown)
used sport tuned motor
There is a damaged on the plastic part that holds the screw for the steering link but already been fixed.
See pictures for some info regarding the kit
Selling Fully Hopped-up Tamiya chassis (not sure if its a TA04SS or TB03 ) for S$200
With used Toyota MR-2 bodyshell
Used Tamiya slick tires/wheels.
Tamiya CVA shocks (not shown)
used sport tuned motor
There is a damaged on the plastic part that holds the screw for the steering link but already been fixed.
See pictures for some info regarding the kit
Tamiya Wild Dagger
Selling for S$140
With mechanical speed controller & two stock motors (with 18T pinion)
Shell was cut but unpainted, protective film not yet removed.
Selling for S$140
With mechanical speed controller & two stock motors (with 18T pinion)
Shell was cut but unpainted, protective film not yet removed.
Originally Posted by sstee88
Its a TRF TA03RS
Tech Initiate
TT01/D & DF02
TT01 D = http://picasaweb.google.com/adddigit...ey=o3WG95knfGU
selling as shown in the link above...
partially hopped up) alum shaft, alum motor mount... +full ball bearings,7.5/10 condition, perfect alignment, new painted in red 'Renault Clio' shell.
No electronics . $120
DF02 - buggy = http://picasaweb.google.com/adddigit...ey=XIzdWdpMMLI
standard kit + cut unpainted shell (gravel hound), + full ball bearings , 9.5/10 condition,
no electronics but 1 silver can motor.
includes 4 new tires + rims/ as shown
$120
Serious buyer only pls.
Thank you
selling as shown in the link above...
partially hopped up) alum shaft, alum motor mount... +full ball bearings,7.5/10 condition, perfect alignment, new painted in red 'Renault Clio' shell.
No electronics . $120
DF02 - buggy = http://picasaweb.google.com/adddigit...ey=XIzdWdpMMLI
standard kit + cut unpainted shell (gravel hound), + full ball bearings , 9.5/10 condition,
no electronics but 1 silver can motor.
includes 4 new tires + rims/ as shown
$120
Serious buyer only pls.
Thank you
Tech Master
iTrader: (3)
lastest updated
hi all,
i hav
1) an eagle racing power supply condition 8.5/10 for sale at $150 (with purchase a digital power distributor will b given as well)
2) pending for sales : KO Propo EX I Mars R 40mhz (Gold Ed) with 1 KF-301F receiver Bought at around $400
condition is 8.5/10 go together with a Speed Mind Transmitter bag
interested parties pls PM mi and qoute ur price.
3) selling for fren:
27 mhz futaba 3pk synthesize module - $120 sold
2piece of R303FHS synthesized receiver - $100 each revise
both condition is 9/10
2 pieces at $190
interested parties pls pm mi
thks
all price are neg.
if interested pls pm mi
thks alot
hi all,
i hav
1) an eagle racing power supply condition 8.5/10 for sale at $150 (with purchase a digital power distributor will b given as well)
2) pending for sales : KO Propo EX I Mars R 40mhz (Gold Ed) with 1 KF-301F receiver Bought at around $400
condition is 8.5/10 go together with a Speed Mind Transmitter bag
interested parties pls PM mi and qoute ur price.
3) selling for fren:
27 mhz futaba 3pk synthesize module - $120 sold
2piece of R303FHS synthesized receiver - $100 each revise
both condition is 9/10
2 pieces at $190
interested parties pls pm mi
thks
all price are neg.
if interested pls pm mi
thks alot
Originally Posted by ofna
Brake disk #PD1613
HEX WHEEL ADAPTOR SE #PD0984
DRIVE PINS #PD0849
CLUTCH BELL 11T #PD1631
KNUCKLE ARM #PD0262
TAKE ALL ABOVE $15!!!
Have few fans to let go to project abandon awhile back.These are 120mm fan.Condition 9/10.NO RUST.Kept well. Need to fix your own wire/connector to power up.All powered up by dc 12v.Please do not ask me how loud is the noise as the sound is bearable to me and it is lsimilar to the ac that I am using now.Deal AMK.PM me with contacts if keen.Thanks all.
1) 1pc NIDEC BETA V(METAL ENCASEMENT with Grill)*Very powerful
TA500DC MODEL A34359-58 -$18.
2) 2pc NMB DC fans.Model 4715KL-04W-B39/0.72A(PLASTIC ENCASEMENT)
$15 each.Get two $26.
3)Also INTELLECT 2/3A in great condition.1200mah.8 cells /4+4 config.For mini infernos.Comes with deans connector. $35
HEX WHEEL ADAPTOR SE #PD0984
DRIVE PINS #PD0849
CLUTCH BELL 11T #PD1631
KNUCKLE ARM #PD0262
TAKE ALL ABOVE $15!!!
Have few fans to let go to project abandon awhile back.These are 120mm fan.Condition 9/10.NO RUST.Kept well. Need to fix your own wire/connector to power up.All powered up by dc 12v.Please do not ask me how loud is the noise as the sound is bearable to me and it is lsimilar to the ac that I am using now.Deal AMK.PM me with contacts if keen.Thanks all.
1) 1pc NIDEC BETA V(METAL ENCASEMENT with Grill)*Very powerful
TA500DC MODEL A34359-58 -$18.
2) 2pc NMB DC fans.Model 4715KL-04W-B39/0.72A(PLASTIC ENCASEMENT)
$15 each.Get two $26.
3)Also INTELLECT 2/3A in great condition.1200mah.8 cells /4+4 config.For mini infernos.Comes with deans connector. $35
Tech Adept
Sale!!!
Hi!
A good condition Team Magic G4S with hop-ups(K-Factory front carbon upper stiffener bracket,alum adjustable single crank steering,carbon & alum side stiffener and fuel tank) and spare parts.
Selling for $350(NEG)!
Pm me if interested!
A good condition Team Magic G4S with hop-ups(K-Factory front carbon upper stiffener bracket,alum adjustable single crank steering,carbon & alum side stiffener and fuel tank) and spare parts.
Selling for $350(NEG)!
Pm me if interested!
hi all,
i've some tt01 hop ups up for sale
1) tt01 ball differential - $20
2) CVA oil shocks with springs - $14
3) tt01 metal motor mount - $6
4) tt01 toe in tie rod - $2
5) TB02 55t spur gear - $3
6) tamiya pinion gears 22t,24t,25t - $2 ea
7) tamiya motor heat sink, fits tt01, tb02, ta04, ta05 - $6
http://www.rctech.net/forum/attachm...chmentid=217934
http://www.rctech.net/forum/attachm...chmentid=217935
8)XB pro TT-01 RTR with
- Expec TTU-02 transmitter and receiver set
- TEU-101BK electronic speed controller.
- TT-01 kit
- PVC tires for drifting
- upgrades: lightweight aluminum shaft set
- silver can motor
- batteries not included
-$150
interested parties pls sms me @91198356
self collect
thnx
i've some tt01 hop ups up for sale
1) tt01 ball differential - $20
2) CVA oil shocks with springs - $14
3) tt01 metal motor mount - $6
4) tt01 toe in tie rod - $2
5) TB02 55t spur gear - $3
6) tamiya pinion gears 22t,24t,25t - $2 ea
7) tamiya motor heat sink, fits tt01, tb02, ta04, ta05 - $6
http://www.rctech.net/forum/attachm...chmentid=217934
http://www.rctech.net/forum/attachm...chmentid=217935
8)XB pro TT-01 RTR with
- Expec TTU-02 transmitter and receiver set
- TEU-101BK electronic speed controller.
- TT-01 kit
- PVC tires for drifting
- upgrades: lightweight aluminum shaft set
- silver can motor
- batteries not included
-$150
interested parties pls sms me @91198356
self collect
thnx
Savage K4.6 For Sale
Selling the above MT. Run about 10 Tanks of 25% nitro fuel. NEVER overheat before. HPI alu purple shocks, Sanwa VB servo for steering, Futaba S9402 Throttle servo, Futaba S3003 servo for reverse engagement, reverse gear enable, kimborough servo saver, centre aluminium skid plates, purple aluminium anti-roll bar, full hex head screw conversion, etc.
Asking for $600.
With Futaba 3PK(Gold) for RTR, asking for $800.
Free Gamma Lube 25% fuel left about half bottle, glow plugs, additional air filters (new), etc...
Call 97441135 if interested. No sms please(cannot receive). Viewing in Tampines St 22. Thank you.
Asking for $600.
With Futaba 3PK(Gold) for RTR, asking for $800.
Free Gamma Lube 25% fuel left about half bottle, glow plugs, additional air filters (new), etc...
Call 97441135 if interested. No sms please(cannot receive). Viewing in Tampines St 22. Thank you.
Tech Apprentice
Tamiya MRE For Sale
Hiya all,
I have a Tamiya MRE rolling chassis for sale. 6 months old and comes with:
- Brand new bottom chassis plate that I bought for $120
- Spare parts box with spare titanium screws, arms and spindles
- Manual and print outs of set up sheets collected over the last few months
It does not come with any tyres, electronics, batteries or bodyshell.
Asking for S$500 firm, if interested please call 98569278.
Regards,
WahKum
I have a Tamiya MRE rolling chassis for sale. 6 months old and comes with:
- Brand new bottom chassis plate that I bought for $120
- Spare parts box with spare titanium screws, arms and spindles
- Manual and print outs of set up sheets collected over the last few months
It does not come with any tyres, electronics, batteries or bodyshell.
Asking for S$500 firm, if interested please call 98569278.
Regards,
WahKum
Originally Posted by retsilla
Tamiya FULL Ti screw set $50
Tamiya FULL fluorine coated alum ball connector $10
Tamiya one way set $30
25tooth pinion $5
Tamiya damper air removal. $25. short version
assorted 23T motors. gd condition. $20
25amp 12v meanwell power supply. $150
pm only thanks
Tamiya FULL fluorine coated alum ball connector $10
Tamiya one way set $30
25tooth pinion $5
Tamiya damper air removal. $25. short version
assorted 23T motors. gd condition. $20
25amp 12v meanwell power supply. $150
pm only thanks
/
//
Selling
Serpent 720 Kit sell at $580 .
2x V1-RR kit sell at $480 (include 1 T2PHKA futaba control, No Tx & Rx
& all some spare part will given oso).
1x Team Speed Mind Transmitter Bag sell at $35
(For M11 & KO Pro)
1x Temp Gun sell at $70 (NEW)
(Come with a Hard Casing, 1x cell & Instruction Manual)
Interested pls Pm or Call mi at 90275270
2x V1-RR kit sell at $480 (include 1 T2PHKA futaba control, No Tx & Rx
& all some spare part will given oso).
1x Team Speed Mind Transmitter Bag sell at $35
(For M11 & KO Pro)
1x Temp Gun sell at $70 (NEW)
(Come with a Hard Casing, 1x cell & Instruction Manual)
Interested pls Pm or Call mi at 90275270
Last edited by TaKi11; 06-15-2007 at 09:11 AM.