R/C Stuff Selling
#5971
ta04 and Miniz for sale
selling a fair condition tamiya TA04 chassis with old kyosho 23t motor and some hopups(saddle pack chassis, frp uper deck, full bearings and a white colour servo saver). includes a cover. $80
also sellin a mr1.5
comes with:
xanavi skyline cover
mr02 clear red chassis
internal turbos
X-Speed motor
alloy rims
alloy motor mount
mr02 spring set
ball diff
2 sets of vanson batteries
mr02 knuckle set
pre-soldered transponder wire
spare parts
all for $150
all prices negotiable
plz contact me at 92395462
also sellin a mr1.5
comes with:
xanavi skyline cover
mr02 clear red chassis
internal turbos
X-Speed motor
alloy rims
alloy motor mount
mr02 spring set
ball diff
2 sets of vanson batteries
mr02 knuckle set
pre-soldered transponder wire
spare parts
all for $150
all prices negotiable
plz contact me at 92395462
#5972
FS
Hyper 7 buggy...Kit only (Quite New condition)
Play twice......Give up.....
Cum with 8 Port Engine and Pipe.....
Without controller.....
Pls QUOTE..............
Kyosho TR 15 off road for sale..
Cum with 2 Engine...
Without controller.
In very good condition..
Pls Quote..
Interested pls pm mi.. Can be arrange to bring down ...for a view
Play twice......Give up.....
Cum with 8 Port Engine and Pipe.....
Without controller.....
Pls QUOTE..............
Kyosho TR 15 off road for sale..
Cum with 2 Engine...
Without controller.
In very good condition..
Pls Quote..
Interested pls pm mi.. Can be arrange to bring down ...for a view
#5973
Originally posted by Ultra_Magnus
ta04 pro for $100
comes wif motor, battery, esc, body and 1 set of tyre
pm me to buy.....
ta04 pro for $100
comes wif motor, battery, esc, body and 1 set of tyre
pm me to buy.....
a tub chassis
very recommended for those who wish to keep their esc safe or their big bl esc.....good for bl users
#5974
LD3 FOR SALE
Brand New LD3 RTR comes with .15 engine with 1 horsepower and Hited Agressor radio set....ONLY S$ 558 or Rp. 2.760.000,-
Kyosho Kanai 3 and all parts in stock now
Any body interested pls PM or email me at [email protected]
Thank you
Kyosho Kanai 3 and all parts in stock now
Any body interested pls PM or email me at [email protected]
Thank you
#5975
Re: mini-z for sale
Originally posted by RR
hello
selling 2nd hand MiniZ for $120.00 (neg)
come with:
full kyosho bar bearings
rear oil filled shock
X-speed motor
interested pls PM me
thanks very much
hello
selling 2nd hand MiniZ for $120.00 (neg)
come with:
full kyosho bar bearings
rear oil filled shock
X-speed motor
interested pls PM me
thanks very much
Where are you located? Could you send me some pics of the car to my email at [email protected]
Thanks
#5976
Tech Regular
iTrader: (2)
Tamiya F201 For Sale...
selling my tamiya f201...
come with...
aluminum Damper F/R...
aluminum motor mount...
aluminum motor guard...
aluminum wheel adapter...
high speed tune gear set...
renforce shaft...
a new body shell with sticker on not use...
full titanium screw...
full bearing...
all going for S$400...
prices negotiable...
interested pls PM me...
thank...
come with...
aluminum Damper F/R...
aluminum motor mount...
aluminum motor guard...
aluminum wheel adapter...
high speed tune gear set...
renforce shaft...
a new body shell with sticker on not use...
full titanium screw...
full bearing...
all going for S$400...
prices negotiable...
interested pls PM me...
thank...
Last edited by losi; 12-19-2003 at 08:04 AM.
#5977
Tech Fanatic
iTrader: (2)
4x4 Year end sale
Your local offroad 4x4 dealership is clearing out these 3 fine pre-loved 4x4 trucks , with the very rare and intricate shiftable 3 speed tranmission (4WD in First gear, 2WD and 2nd and 3rd gears), all in excellent mechanical shape for their age (oldest being a fine 23, 18 and then 8 years old). Currently non-running but can be made operational with minimal fuss in radio and servo linkages. Worn-out mechanical components replaced with new items where available, gearboxes on all three trucks are low-mileage.
First up is the grand daddy:
Factsheet available here.
- Acquired from the US, with additional tire inserts, original transistorized speed controller, original (probably dead-due-to-age battery pack), missing side mirror, rear Toyota logo, light roadrash on body. Tires are still supple. Lockable front hubs still lock. One broken rear tab in battery box. I did not break anything when this truck was in my care. I only hooked up a battery to make sure the mechanicals were in working order, and that the transmission shifted properly, so I never actually drove this one.
Next is the middle guy:
Factsheet available here.
- A converted Mountaineer. I bought a used Bruiser body from the US and turned this into a Bruiser, but it is actually a Mountaineer chassis. They are almost the same (see the Mountaineer factsheet link below for differences). Missing the side mirror, body rash from previous owner's use, single minor crack on tailgate. I ran this chassis before, and I can leave the Futaba 3PDF radio system in the truck for this one. As well as a Novak Racer ESC. Chassis is straight, and I only ran this truck on dirt once for pictures. Tires have full treads. This body also has front headlights installed with white LEDs for the HID look.
Last is the young guy:
Factsheet available here.
- An original Mountaineer, I stripped the body, repainted it, painted the cracked windscreen black to simulate deep tinting, again no side mirror, this chassis has little mileage on it. I bought and applied new decals on this truck. Rear tailgate is missing the licence plate and is cracked. An accident with thinner meant that the detail on the tailgate isn't as sharp as it used to be (the thinner softened the plastic on application, but hardened again after clearing off the thinner). Tires have full treads. This one hasn't been driven either.
**************************************************
These trucks are from an long gone era when Tamiya made their cars out of metal, not only looked, but worked truly like 1/10th scale versions of their full size brethren.
I spent considerable time and effort to acquire and restore these trucks and would like to be suitably compensated for giving them up. Though these trucks are going to be passed on to new owners, do be aware that these are out-of-production, and their values would not be dropping. In fact they rise as time goes by, and would continue to (unless Tamiya took it upon themselves to re-issue). But as experience with the Mountaineer showed, a reissue did not affect the values of the previous trucks. Each is a unique model.
As before stated, Ebay prices are a fair gauge of how much one should pay for one of these trucks, but do be aware the weight of each of these to ship into Singapore makes postage cost run well into the three digits, as well as taxes due to GST et al.
I have these trucks here in Singapore and would request that a competitive offer be made with that in mind. Viewing can be pre-arranged at my convenience.
First up is the grand daddy:
Factsheet available here.
- Acquired from the US, with additional tire inserts, original transistorized speed controller, original (probably dead-due-to-age battery pack), missing side mirror, rear Toyota logo, light roadrash on body. Tires are still supple. Lockable front hubs still lock. One broken rear tab in battery box. I did not break anything when this truck was in my care. I only hooked up a battery to make sure the mechanicals were in working order, and that the transmission shifted properly, so I never actually drove this one.
Next is the middle guy:
Factsheet available here.
- A converted Mountaineer. I bought a used Bruiser body from the US and turned this into a Bruiser, but it is actually a Mountaineer chassis. They are almost the same (see the Mountaineer factsheet link below for differences). Missing the side mirror, body rash from previous owner's use, single minor crack on tailgate. I ran this chassis before, and I can leave the Futaba 3PDF radio system in the truck for this one. As well as a Novak Racer ESC. Chassis is straight, and I only ran this truck on dirt once for pictures. Tires have full treads. This body also has front headlights installed with white LEDs for the HID look.
Last is the young guy:
Factsheet available here.
- An original Mountaineer, I stripped the body, repainted it, painted the cracked windscreen black to simulate deep tinting, again no side mirror, this chassis has little mileage on it. I bought and applied new decals on this truck. Rear tailgate is missing the licence plate and is cracked. An accident with thinner meant that the detail on the tailgate isn't as sharp as it used to be (the thinner softened the plastic on application, but hardened again after clearing off the thinner). Tires have full treads. This one hasn't been driven either.
**************************************************
These trucks are from an long gone era when Tamiya made their cars out of metal, not only looked, but worked truly like 1/10th scale versions of their full size brethren.
I spent considerable time and effort to acquire and restore these trucks and would like to be suitably compensated for giving them up. Though these trucks are going to be passed on to new owners, do be aware that these are out-of-production, and their values would not be dropping. In fact they rise as time goes by, and would continue to (unless Tamiya took it upon themselves to re-issue). But as experience with the Mountaineer showed, a reissue did not affect the values of the previous trucks. Each is a unique model.
As before stated, Ebay prices are a fair gauge of how much one should pay for one of these trucks, but do be aware the weight of each of these to ship into Singapore makes postage cost run well into the three digits, as well as taxes due to GST et al.
I have these trucks here in Singapore and would request that a competitive offer be made with that in mind. Viewing can be pre-arranged at my convenience.
#5979
Tech Adept
Kawada M300SE for sale
I have a 1/12 pan car Kawada M300SE with sum hop ons for sale @ $130 interested pls sms me 9456 4029.Without electronics.But with Spare tires & wheels.
SOLD
No longer playing pan cars trying out nitro trucks.
SOLD
No longer playing pan cars trying out nitro trucks.
Last edited by mclan; 12-22-2003 at 08:08 AM.
#5980
Tech Addict
Join Date: May 2002
Location: relax.......... i'm not really serious......
Posts: 501
--------
Last edited by karateka; 12-22-2003 at 05:21 AM.
#5982
Tech Initiate
MX3 AND RX-311
SANWA MX3 CONTROLLER 40mhz WITH RX-311 RECEIVER AT $100.
EVERYTHING IN ORIGINAL BOX AND GOOD WORKING CONDITION. TEST B4 BUY.
RX-311 sold.
TX AND A SET OF CRYSTAL FOR SALE $50 (sold)
EVERYTHING IN ORIGINAL BOX AND GOOD WORKING CONDITION. TEST B4 BUY.
RX-311 sold.
TX AND A SET OF CRYSTAL FOR SALE $50 (sold)
Last edited by mfred; 12-20-2003 at 03:16 AM.
#5984
Re: Re: ta04 and Miniz for sale
sellin a fair condition ta04 with some hop ups.(sadle pack chasis, frp upper deck, spur adapter or something.....extra spur gear and new bumper) o0
sellin a ex5 tx good condition with futaba rx 80
sellin a ex5 tx good condition with futaba rx 80
Last edited by BRANDED; 12-20-2003 at 06:12 PM.
#5985
Schulze Charger
1 unit of Schulze Ecolader Select Chargers for Sale.
Come with seperate 30amp discharger.
Bought at 800.
Selling at 550. Good Working Conditions.
Interested parties pls SMS to 97624200.
Thank you.
Come with seperate 30amp discharger.
Bought at 800.
Selling at 550. Good Working Conditions.
Interested parties pls SMS to 97624200.
Thank you.