XRAY T3
11-05-2010, 04:26 PM
#3256
my car understers and is taily
11-05-2010, 06:21 PM
#3257
Tech Initiate
Yeah mine too 
11-06-2010, 05:11 AM
#3259
i ve tried diffrent springs im using 3 hole piston with 350 oil
11-06-2010, 05:13 AM
#3260
tamiya bladers work great in the xray shocks
11-06-2010, 06:45 AM
#3261
deleted post
Last edited by RCknight; 11-06-2010 at 07:45 AM.
11-06-2010, 03:30 PM
#3263
thanks i will try that how much tow in at the rear should i run
11-06-2010, 04:21 PM
#3264
how many mm shims should i use on the front to widen it
11-08-2010, 09:53 AM
#3265
You could also try adjusting your wheel base settings.
11-08-2010, 12:23 PM
#3266
yeah i have used the wheel base i have made it shorter
11-08-2010, 02:09 PM
#3267
11-08-2010, 09:19 PM
#3268
ill try it
11-08-2010, 10:45 PM
#3269
I usually run 2mm in front of the rear arms. I use (2) of the gold 1.15 shims to widen the front of the car with the front arms all the way forward. I'm pretty much running Paul's asphalt set-up. The only issue I have with it is that the car steers ALOT. I'm going with lighter oil and more droop in the front.
Mike
Mike
11-09-2010, 12:25 AM
#3270
I usually run 2mm in front of the rear arms. I use (2) of the gold 1.15 shims to widen the front of the car with the front arms all the way forward. I'm pretty much running Paul's asphalt set-up. The only issue I have with it is that the car steers ALOT. I'm going with lighter oil and more droop in the front.
Mike
Mike