Pace72

iTrader: (2)

Hi Josh,

do you know if Alex Lopez is running long wheelbase in stock on carpetor if he run the box set-up wheelbase?

thanks

Pace

pucho

Pace: I am not Josh or Alex but I do build the cars for Alex and he tends to like a shorter wheelbase, but not much shorter than stock.

Pace72

iTrader: (2)

thanks pucho!

Pace

Josh Cyrul

iTrader: (1)

Pucho - I'm glad you got that one - I had no clue how Alex runs his car!!

eklips

iTrader: (2)

Josh,

Do you run hi or low roll ctr for 12 scale carpet?

thanks

MattW

Josh, What motor set-up do you generally tend to run in 12th?? Can/arm and brush/spring if poss
cheers

Josh Cyrul

iTrader: (1)

eklips - I run it standard unless the traction is reallly high or really low... For carpet - usually just the standard pivot balls down on the chassis...

MattW - Fantom (Reedy TI based), 8x1 with 20 degrees of timing and a 22/100. Green springs and I'm not sure of the brush # from Fantom....

Anders Myrberg

Josh,
Can you please mail me on [email protected], eeh, now...

RandyB

iTrader: (2)

http://babelfish.altavista.com/babel...ko-yano.net%2f


Looks like the C12 is being represented in Japan. Kinda cool.

Randyb

MattW

Cheers Josh that's great, is it the 5mm arm?. Have you done much running with the PT can?? I run Fantom's and ran Ti's all last winter. Tried the Kr, but simply couldn't last and was thinking of at least trying the PT can this year.

Chris Reilly

Josh can you please describe step by step your shock bleeding process for the XRAY T1 FK ? What do you use behind your bladders and how many ?

Korgae

iTrader: (15)

Hey Josh,

Can you tell us all what changes you have made to your setup since Carpet nats 04?

What changes have you made or tried since changing to the new 3.5 chassis. ( are you running the cells on the left one slot up)

Also last year you ran AE oil ( 50/30) Are you now running XRAY 30/30 or ??

Thanks, and good luck in the 200mm Finals, Bring it home for us!!.

Chris Reilly

Who makes the .7mm sway bar that you use ? I thought maybe you made it.

mcsquish

iTrader: (1)

Josh, since I will not get up there before you leave again, congrats on fourth. I know you wanted to do better, but with the problems, fourth is good. Good luck at FL. and good luck with Angel's list.

reilly

iTrader: (2)

Yeah Chris,
Josh cuts down a 1mm bar to .7
Happy dremeling

James