Colbynobo

iTrader: (21)

I ran one of my BD7s without battery guides for a few weeks without too many issues. As recommended, it was necessary to file down the edges of the chassis slots or else the tape eventually split. Now I have a set of the guides for both cars. Both pairs are made of metal as opposed to plastic, though.

YOKB7-118G

Smartypants

An interesting chasis plate used at the world warmup! i believe this was Hara's car....

Francis M.

iTrader: (2)

Is this the new trend?

DirkW

iTrader: (1)

I stand corrected then.

cyclonetog

That would explain why he missed the show...

Potoczak

iTrader: (120)

I guess that's why he didnt do to good

JimmyMac

iTrader: (2)

Someone's gotta test it for the team.

inpuressa

iTrader: (10)

So I guess alum chassis is still not ready for prime time?

dan22

iTrader: (4)

How much I you want for it?

fatchickterian

iTrader: (12)

[QUOTE=DirkW;13164087]The only battery "guide" included is a center plastic piece under the the belt. Else you're supposed to just tape the batteries to the chassis. However, there are optional (plastic*) brackets available


Would anyone be interested in plastic battery guides? they are made out of ABS plastic. Suits ferfect on my BD7 and 2014 and using a Thunder power 5300mAh battery:

I have a pair of each left, white and black

fatchickterian

iTrader: (12)

Would anyone be interested in plastic battery guides? they are made out of ABS plastic. Suits ferfect on my BD7 and 2014 and using a Thunder power 5300mAh battery:

I have a pair of each left, white and black

[/QUOTE]

The white one is gone, only have the black one left!

Potoczak

iTrader: (120)

Where can I find the black arm mounts for the black edition kit???

CristianTabush

iTrader: (13)

Hayato ran the chassis plate as well and he was in the show. He said it made the car easier to drive and more stable.

Hara ran top 3-5 A Main times in the B. He just happened to fail to make the show.

The worlds warm was not a good event to see where everyone will be at for the worlds. The tires were so terribly inconsistent that some racers were not able to perform to their full potential due to bad sets of tires. This may have been the case for Hara in qualifying. His B1 time was actually faster than Volker's A1 time.

drsfly

Christian,
Any clue as to what top deck they were running....ie very thin or standard 2mm???

CristianTabush

iTrader: (13)

Standard top deck. Same set up, however the set ups we were running were very unconventional.

Most Yokomo guys ended up running the 44.2 FF mount in the rear for very little rear toe in and 5000-10000 wt rear diff oil. This gave the best forward bite and overheated the tires less.