FLAT OUT

I have the alloy shocks, is there any pistons from other cars like tamiya, m14, hotbodies etc that will fit ?? I after 3 hole pistons if poss

tc3jp

iTrader: (7)

I see there are several different versions of the t2- 07,08,09 etc.
Whats the difference ? is the 7 as good as the 9 or is the 9 way better than the 7
Did they change the geo radically for the t3?is the 7 as fast as the t3/whew!

FLAT OUT

Anyone !!

Dane

iTrader: (26)

Anyone using Associated Black Grease for the CVDs rather than Hudy Grease?

Xpress

iTrader: (3)

You can also try Tamiya AW grease.

hanulec

iTrader: (28)

sorry buddy... most people are happy with the plastic bodied shocks. i just use xray stock pistons... and if you want different sizes i use a hand drill to open up the existing holes. also available are the pre-drilled optional pistons... pn 308036 Composite Non-Adjustable Pistons

Big Features

iTrader: (4)

I just use a bit of light oil. After a few runs, I spray them and re-oil.

RC MARKET

iTrader: (12)

Yes
or HUDY graphite grease !

sidecarphil1

iTrader: (1)

i use light Huby bearing oil after every race day , but i use the ECS axles and i have shrink wrap over the joints to keep the heavy dirt out

hanulec

iTrader: (28)

check out this link to better understand the difference between the T2'008/009 and the T3:

http://www.teamxray.com/teamxray/new...the%20new%20T3.

traxxas.uy

iTrader: (2)

Hi,

I´m new to electric cars, I came from nitro.
Recently I bought a t3 here in the forum, and I need to buy pinions for it.

It is a EU version, so it has a 84T spur 48 pitch.
I will be running a 5200Kv motor with 7.4 Lipos.
My track has a straight of 40m

Anybody can tell me a pinion to start with???

I have no idea. I need a reference to start trying different meassures.


Thanks,

Ale

prodriver

rear wanting to overtake the front coming out of the corners... t3?? any ideas.

if you hold full right or left and hold full power car will spin on the spot....???

any ideas

thanks

RC

Big Features

iTrader: (4)

I'm assuming the car is already balanced. There is a ton you can do to fix this on the T3. I would start by posting your set up with the track conditions. That way I can help you in the right direction

Mike

Skiddins

Which motor

traxxas.uy

iTrader: (2)

Hi Skiddins,

I have this combo:

hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10330&Product_Name=Brush less_Car_Power_System_5200Kv/100A

I was thinking in buying Yhea Racing pinions sets.
Like this:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=300417577545&Category= 34061&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2#ht_ 1445wt_939

Thnaks

Ale