Xray T1
#7441
dont know the part number of the shocks but they are all the same size now. go to teamxray.com and pull up the parts list.
#7442
Tech Master
iTrader: (1)
Thats the problem they have about 6 different part #s......long shocks in the rear......short in the front....... indexed piston rods.... threaded style......It makes no since at all if your trying to find out which kit comes with which shocks.......I converted a T1mini which has the same shocks at all four corners.....and Im trying to find out if the Factory kit has the same........
#7444
I think they are the same as the T1M.
#7445
Tech Regular
yeah all the shocks are now the same size(evo2/T1R/Factory/T1M)
the old evo had short front and long rear but no they are all compatiable.
there is only one type of shock shaft but there are plastic threaded bodies and aluminum bodies.
factory kit bulkhead part # /// 30 2001
it is on the xray website
the old evo had short front and long rear but no they are all compatiable.
there is only one type of shock shaft but there are plastic threaded bodies and aluminum bodies.
factory kit bulkhead part # /// 30 2001
it is on the xray website
#7449
Tech Champion
iTrader: (5)
Originally posted by BHenderson
where can someone get those 130 or 132 spur gears?
where can someone get those 130 or 132 spur gears?
PRS Website
And see about distributers. They are quieter than any other gears I have owned.
BWT-Heres a pic of the FK bulkheads that JOneser is selling. Notice how much material they took off and the new mid-roll center holes that allow finer adjustment of roll, anti-squat and anti-dive. And there cousins-Pro-Squat and kick-up!!
#7451
Tech Apprentice
Originally posted by theisgroup
your factory kit only comes with c hubs. and as far as setting, what will you be running foam\rubber, carpet\concrete\asphalt?
your factory kit only comes with c hubs. and as far as setting, what will you be running foam\rubber, carpet\concrete\asphalt?
i will run it with rubber tyre n on aspalt
#7452
Originally posted by momotalo
i know it comes only with c-hub, but i saw xray has PB too. eheheheh
i will run it with rubber tyre n on aspalt
i know it comes only with c-hub, but i saw xray has PB too. eheheheh
i will run it with rubber tyre n on aspalt
#7455
Tech Regular
iTrader: (18)
Hi all, just wondering if this is normal...
I'm currently building my T1 Kit and I hope i'm overlooking something.
Page 10, mid page... where the you mount the lower suspension holders to the bulkheads... I have 1 Plastic one with no aluminum nut (belongs to the right of the car)... 2 Holders that take an aluminum nut (both of these terminate on one end where the kingpin goes through)... and then i have 1 more holder which requires an aluminum nut, but the kingping is able to slide right through the hole ( there is no termination on one side.... just a hole)...
Please let me know where this belongs... or if i should contact xray for a new part...
Regards,
Page 10, mid page... where the you mount the lower suspension holders to the bulkheads... I have 1 Plastic one with no aluminum nut (belongs to the right of the car)... 2 Holders that take an aluminum nut (both of these terminate on one end where the kingpin goes through)... and then i have 1 more holder which requires an aluminum nut, but the kingping is able to slide right through the hole ( there is no termination on one side.... just a hole)...
Please let me know where this belongs... or if i should contact xray for a new part...
Regards,