Kyosho VoneR Thread
#3361
Originally posted by RClover
Hi Patel,
so, is your clutch bell has the same horizontal freeplay too? like 1-1.5mm?
Hi Patel,
so, is your clutch bell has the same horizontal freeplay too? like 1-1.5mm?
#3362
Tech Addict
when i get my kit(about 2 weeks or less) what "problems" do i have to look out for while building the kit? should i just follow the instructions exactly?
(V One RR owner, please answer!!!!!!!!!)
(V One RR owner, please answer!!!!!!!!!)
#3363
Originally posted by rjl
The best thing you can add to the V1stutter is time. When the instructions have a measurement and it says "approx." Get a vernier and get it approximately axact!
The rear pulley is fixed to the diff case with 2.6x8 mm countersunk screws, find some 3x8 countersunk screws as the rear diff has a habbit of leaking out the oil.
I've just built my second V1 after a short stint with a NTC3.
Oh, you will need more clutch shims than are supplied in the kit if you want to play with clutch shimming.
The best thing you can add to the V1stutter is time. When the instructions have a measurement and it says "approx." Get a vernier and get it approximately axact!
The rear pulley is fixed to the diff case with 2.6x8 mm countersunk screws, find some 3x8 countersunk screws as the rear diff has a habbit of leaking out the oil.
I've just built my second V1 after a short stint with a NTC3.
Oh, you will need more clutch shims than are supplied in the kit if you want to play with clutch shimming.
besides, the 2 speed shaft is a bit too fit. make sure the bearing is all the way goes into the left side bulk head or your 2speed will be blinding. make sure you have the right screw size for your left brace on the bulkhead or the longer screw will force out the bearing and resulting in blinding 2speed again.
#3364
Tech Addict
hey manticore, what engine do run in your v one r?
#3365
Originally posted by asd
hey manticore, what engine do run in your v one r?
hey manticore, what engine do run in your v one r?
#3366
Tech Addict
thxs
#3367
Tech Addict
should i run the stratus body(ugly as h3ll!)or should i run a different body like supra?
#3368
Originally posted by Manticore
i have a few, S5, RB 5 ports, RS12T
i have a few, S5, RB 5 ports, RS12T
#3369
Originally posted by asd
should i run the stratus body(ugly as h3ll!)or should i run a different body like supra?
should i run the stratus body(ugly as h3ll!)or should i run a different body like supra?
#3370
Originally posted by patelladragger
Manticore - how is the S5 compared to the RB 5 port? Have you ran it against collaris?
Manticore - how is the S5 compared to the RB 5 port? Have you ran it against collaris?
RB 5 port has better bottom and mid range.
we dont have any good collari here.
going to get the pixy pretty soon with its pipe. going to rock.
#3371
thanks for the input manticore. Let us know how the rossi runs. I was going to buy an S5 but if you say the RB 5 port is stronger off the bottom then I'll just pass and see what the rossi holds. The trinity guys are saying it's awesome - but what do you expect them to say. I've got a RB 5 port, it's strong - but IMO the collari 5-port is better off the bottom - when tuned right it's the fastest .12 engine I've run thus far.
#3372
Tech Addict
do any of you guys have any new pics of your V One R(R)'s????
plz post if u can, i wanna know what my car will roughly look like when i get it
thxs in advance
plz post if u can, i wanna know what my car will roughly look like when i get it
thxs in advance
#3373
Originally posted by patelladragger
thanks for the input manticore. Let us know how the rossi runs. I was going to buy an S5 but if you say the RB 5 port is stronger off the bottom then I'll just pass and see what the rossi holds. The trinity guys are saying it's awesome - but what do you expect them to say. I've got a RB 5 port, it's strong - but IMO the collari 5-port is better off the bottom - when tuned right it's the fastest .12 engine I've run thus far.
thanks for the input manticore. Let us know how the rossi runs. I was going to buy an S5 but if you say the RB 5 port is stronger off the bottom then I'll just pass and see what the rossi holds. The trinity guys are saying it's awesome - but what do you expect them to say. I've got a RB 5 port, it's strong - but IMO the collari 5-port is better off the bottom - when tuned right it's the fastest .12 engine I've run thus far.
#3374
Originally posted by asd
do any of you guys have any new pics of your V One R(R)'s????
plz post if u can, i wanna know what my car will roughly look like when i get it
thxs in advance
do any of you guys have any new pics of your V One R(R)'s????
plz post if u can, i wanna know what my car will roughly look like when i get it
thxs in advance
sorry guy......
#3375
Tech Addict
could you post it anyway?
pppppppppppppppppppppppllllllllllllllllllllzzzzzzz zzzzzzzzzzzzzzzzz
pppppppppppppppppppppppllllllllllllllllllllzzzzzzz zzzzzzzzzzzzzzzzz