Alex Racing Barracuda R2 & R3
#1756
Tech Champion
iTrader: (31)
Originally posted by Randman
Cool, I'll call Steve monday and see if he can get em for me. I made a last minute decision to race tomorrow. It's just a parking lot race, but should be similar conditions to Hitec. Propably wont be online until about 4 tomorrow, I'll be sure to let you guys know how it goes
Cool, I'll call Steve monday and see if he can get em for me. I made a last minute decision to race tomorrow. It's just a parking lot race, but should be similar conditions to Hitec. Propably wont be online until about 4 tomorrow, I'll be sure to let you guys know how it goes
-Dave
#1757
Randman where are you racing Sunday?
#1760
Originally posted by JDM_DOHC_SiR
Hermi`
the EXCEL kit will Cost 58000 Yen...!! and that will be a complete car....
Now on the other hand the Xenon Kit will be a a conversion and will cost much less than that....
-Dave
Hermi`
the EXCEL kit will Cost 58000 Yen...!! and that will be a complete car....
Now on the other hand the Xenon Kit will be a a conversion and will cost much less than that....
-Dave
All those X's and E's got me confused
I think we need a page with each company described and what they make for the cuda, with links for each with pics, or am the only one that can't keep track of all the different companies that make things cuda?
#1762
Tech Regular
Just when I was getting worried that I would never break my 'cuda, it happened. I broke my first part since owning the R2...a front shock tower Hit a marker cone at top speed with my 8 turn motor and the car came to a grinding halt. At least I can now say I broke something on my 'cuda.
Thankfully KO Racer's chassis kit which I bought is on its way. The weirdest things is that every other part on the car is fine.
Thankfully KO Racer's chassis kit which I bought is on its way. The weirdest things is that every other part on the car is fine.
#1763
Regional Moderator
Originally posted by itchynads
Just when I was getting worried that I would never break my 'cuda, it happened. I broke my first part since owning the R2...a front shock tower Hit a marker cone at top speed with my 8 turn motor and the car came to a grinding halt. At least I can now say I broke something on my 'cuda.
Thankfully KO Racer's chassis kit which I bought is on its way. The weirdest things is that every other part on the car is fine.
Just when I was getting worried that I would never break my 'cuda, it happened. I broke my first part since owning the R2...a front shock tower Hit a marker cone at top speed with my 8 turn motor and the car came to a grinding halt. At least I can now say I broke something on my 'cuda.
Thankfully KO Racer's chassis kit which I bought is on its way. The weirdest things is that every other part on the car is fine.
what has happened everyone breaking a front shock tower
#1764
Tech Regular
Originally posted by Ko Racer
you should have the parts very soon
what has happened everyone breaking a front shock tower
you should have the parts very soon
what has happened everyone breaking a front shock tower
#1766
Tech Champion
iTrader: (31)
Re: Thanks heaps and one more thing
Originally posted by FUK_WRX
Guys thanks a lot for your help. I need to know one final things. What is the internal ratio of the Barracuda ??
Guys thanks a lot for your help. I need to know one final things. What is the internal ratio of the Barracuda ??
2.44 roughly
16T bevel gear and 39T ring gear...but you can divide these to get a more presise #
-Dave
#1767
Regional Moderator
Originally posted by JDM_DOHC_SiR
The Flap one is too thin toward the outside and so it the R2 one...but the PAL and R1 front towers are much stronger
so these are now the weapon of choise for me
-Dave
The Flap one is too thin toward the outside and so it the R2 one...but the PAL and R1 front towers are much stronger
so these are now the weapon of choise for me
-Dave
are you mounting on the out side hole of the tower ?and are you breaking more then just the tower ? and how are the kai towers doing for you? are they a problem also?
#1768
Regional Moderator
speaking of air scoop for the motor here is a picture of one
#1769
Tech Champion
iTrader: (31)
Originally posted by Ko Racer
are you mounting on the out side hole of the tower ?and are you breaking more then just the tower ? and how are the kai towers doing for you? are they a problem also?
are you mounting on the out side hole of the tower ?and are you breaking more then just the tower ? and how are the kai towers doing for you? are they a problem also?
I usually mount the shocks on the 2nd or 3rd hold and they are breaking.....
here is my list of strongest to weakest front towers..
1)R1 2.6mm
2)PAL R1 2.6mm
3)K-modles 2.3x2(but still breaks at the base of the 2 pieces
4)R2 2.8mm
5)FLAP 3mm but to thin towards the outside mounting locations
...
-Dave
#1770
Tech Champion
iTrader: (31)
Originally posted by Ko Racer
speaking of air scoop for the motor here is a picture of one
speaking of air scoop for the motor here is a picture of one
-Dave