Tekin RS ESC sensored
11-02-2010, 02:52 PM
Tech Master
iTrader: (19)
setup?
anybody have a good setup for 13.5 tc on a 100x48ft indoor track?
11-02-2010, 02:53 PM
Tech Apprentice
More a point of curiosity I guess. I read the instructions on the website/watched the video, changed the Explorer settings as directed but don't have Tekin.esc file on my disk. Running vs 208 under Windows 7.
208 runs fine, should the file be there? I don't want to mess up the install
208 runs fine, should the file be there? I don't want to mess up the install
11-02-2010, 02:59 PM
When you install 212 it will remove the older version of the Hotwire for you. No problems.
11-02-2010, 04:33 PM
11-02-2010, 05:16 PM
11-02-2010, 05:32 PM
Need help
My Tekin is not chirping when I try to recalibrate to the radio. Lights 1&2 and 6&7 are flashing indicating wrong motor type selected. I plug in my Hotwire just to make sure and according to it, I'm on BL-FW
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
11-02-2010, 05:34 PM
Does anyone know if the SMC extreme 60c 600mah lipo is roar legal?
11-02-2010, 06:39 PM
My Tekin is not chirping when I try to recalibrate to the radio. Lights 1&2 and 6&7 are flashing indicating wrong motor type selected. I plug in my Hotwire just to make sure and according to it, I'm on BL-FW
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
11-02-2010, 06:42 PM
11-02-2010, 07:04 PM
My Tekin is not chirping when I try to recalibrate to the radio. Lights 1&2 and 6&7 are flashing indicating wrong motor type selected. I plug in my Hotwire just to make sure and according to it, I'm on BL-FW
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
11-02-2010, 07:37 PM
Thanks alot buddy...I'll fix the plug and give it a go tomorrow. Makes me wonder though...what would happen if I plug in a 2s pack?
11-02-2010, 08:23 PM
Tech Regular
iTrader: (11)
My Tekin is not chirping when I try to recalibrate to the radio. Lights 1&2 and 6&7 are flashing indicating wrong motor type selected. I plug in my Hotwire just to make sure and according to it, I'm on BL-FW
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
I've rebinded my radio to the rx several times with no luck.
For my own information though, does the rx pack needs to be plugged in while attempting this? The plug broke off and I have to replace it but I didn't know if that's a big deal or not?
What happened to the old days of setting & forgetting it......
When mime did this ( Lights 1&2 and 6&7 ) I had to send it in to be fixed
-=light=-
11-02-2010, 11:11 PM
Led's 12 67 is wrong motor type. However if your booster or rx pack are not charged and supplying enough voltage this too can cause this.
Hook up a 2s pack and verify it all works. If it does it's your bec supply voltage: booster or Rx pack is too low.
Hook up a 2s pack and verify it all works. If it does it's your bec supply voltage: booster or Rx pack is too low.
11-03-2010, 12:59 AM
Thanks Randy... that's exactly what it was. Hooked up a 2s pack and all is good. Looks like I need another RX pack or booster.
11-03-2010, 02:45 AM
Honestly with you not running it yet it's going to be a little hard to suggest. You didn't remember your 203 settings so there's nothing to work with as a starting point. Try a setting from off of the website to start out with and leave your gearing where it is. I think the biggest thing you will notice will be the min throtle adjustment. It works wonders in onroad and I'm sure it will have the same affect in offroad.
Thanks for all the advice. I will run the car tonight and if necessary do some tuning to FDR, motor timing and esc. I will tune in again later on with my findings.