Futaba 10PX
#211
It is just an antenna thing. The E-receiver has a small antenna close to the chassis (metals carbon etc) so can (not saying it will) loose some signal on longer distances.
#212
Tech Apprentice
I don´t know why. That is copy paste from receiver manual.
#213
Tech Rookie
My transmitter has stopped working after failed screen calibration. There is no response on the screen and I cannot access the menus. I've tried to update to the latest software version using an Micro-SD card but it did not help. I'm aware others have had the same weird problem - but is there a solution? thanks
#214
R/C Tech Elite Member
iTrader: (9)
I pulled the plug and got the 10px, I have to say this is a nice upgrade from the 4px (which is what I was using).
Curious, the instructions say you can charge a "LiFe" battery from the "Special Futaba Charger Chord". Yet no where can I find what the part # is to the "Special Futaba Charger Chord". Anyone know what external chord/charger cable can be used to charge a LiFe battery via the plug on the backside of the 10px? (id' like to charge w/o haveing to open my battery tray).
OR if anyone know if there is a 3rd party lipo/charge induction pad available that would work too.
thanks,
Curious, the instructions say you can charge a "LiFe" battery from the "Special Futaba Charger Chord". Yet no where can I find what the part # is to the "Special Futaba Charger Chord". Anyone know what external chord/charger cable can be used to charge a LiFe battery via the plug on the backside of the 10px? (id' like to charge w/o haveing to open my battery tray).
OR if anyone know if there is a 3rd party lipo/charge induction pad available that would work too.
thanks,
#215
Tech Regular
10PX Battery Tray dimensions
Hey guys, trying to choose the most ideal 2S lipo for this beast and would like to confirm how much battery tray space we have to work with.
If anyone could confirm the battery tray dimensions, it would be greatly appreciated.
Much Thanks,
MH
If anyone could confirm the battery tray dimensions, it would be greatly appreciated.
Much Thanks,
MH
#216
You could try to find the dimensions of an original battery.....
Futaba Transmitter Battery Li-Po 7,4V 2000mAh T10PX,T16iZ (LT2F2000B) | EuroRC.com
Futaba Transmitter Battery Li-Po 7,4V 2000mAh T10PX,T16iZ (LT2F2000B) | EuroRC.com
- Length: 80mm
- Width: 46mm
- Thickness: 17.4
#217
Tech Regular
Thanks so much, I've been looking for those dimensions for quite some time now...
What about the following Protek 2S Lipo:
https://begoracing.com/shop/index.ph...roduct_id=2015
Dimension (LxWxH): 99.2x31x17.9mm
Can anyone confirm that this would fit the 10px? Seems a bit long...
Much appreciated folks!...
What about the following Protek 2S Lipo:
https://begoracing.com/shop/index.ph...roduct_id=2015
Dimension (LxWxH): 99.2x31x17.9mm
Can anyone confirm that this would fit the 10px? Seems a bit long...
Much appreciated folks!...
#218
Regional Moderator
iTrader: (1)
From the manual, it will fit their LiFe battery as well with a dimension of L86.5 x 39 x 16 mm
https://www.eurorc.com/product/14231...fe-66v-1700mah
the protek battery you found may or may not work. at first glance its too long and thick. If you have the transmitter just measure the void in the battery compartment on the transmitter to get a better understanding
https://www.eurorc.com/product/14231...fe-66v-1700mah
the protek battery you found may or may not work. at first glance its too long and thick. If you have the transmitter just measure the void in the battery compartment on the transmitter to get a better understanding
#221
The weight of the transmitters is noted in the manuals.
But you want the weight with a battery. Which/what battery?
But you want the weight with a battery. Which/what battery?
#223
#225
Seems like some things indicate the 10Px comes with both the regular and large wheel other things make it sound like it only comes with one anyone confirm